Daily Routine Monitoring, Preventive/breakdown maintenance of ESP Transformer Rapping Motor and Centrifuging of 5x200MW, Obra TPS

PART-A HVR TRANSFORMER & CENTRIFUGING

Shifting of repaired / damaged / new ESP transformer from place of storage near electrical workshop area to ESP ground floor or from ESP ground floor to Electrical workshop (approx 600mts).

Lifting up/down the ESP transformer from ESP top (35 mtr) to ground floor of ESP area vice versa

Dismantling and commissioning of ESP transformer connected to ESP field along with negative link rod its bushing, bushing chamber and associated works

Preventive maintenance, up keeping and cleaning of ESP transformer support insulators, insulators, negative bushing and their chambers. (1 Trans, 4 nos. support insulators, 3 nos. isolator insulator, 2 nos. negative bushing and respective chambers of 1ESP field = 1 Job)

Up keeping and cleaning of E.S.P top floor area.

Over hauling of ESP transformer and fault finding.

Shifting of 1200 LPH capacity centrifuging machine from electrical workshop area to ESP top.(approx 35mtr)

Dry out / Filtration/ centrifuging Of ESP Transformer Oil of rating. 104.7 KVA capacities HVR Transformer (Total oil = 492 litre)till BDV greater than 70KV is attained

Complete Overhauling of 1200 LPH capacity centrifuging machine

Daily Routine monitoring of HVR ESP Transformer & Associated Equipment at ESP Top of 5x200MW, BTPS

PART-B RAPPING SYSTEM Daily Routine Monitoring & operation of rapping motors (emitting & collecting) of ESP system and maintenance of rapping module of 5X200MW ‘BTPS, Obra

M/S ARVIND ERECTORS