Shifting and Installation of following DG set for Downsizing under SSA, Ghaziabad and SITC of 2.0 HP Submersible pump set at T.Exch. Kaushambi, Gzb.

Sub-Head (I) Dismentalling of existing 1 x 62.5 KVA Diesel E/A set alongwith sound proof enclosuer from the existing foundation in T.E Bldg. sector-19, Noida i/c disconnection of power cable, Earthing strip, exhaust pipe and fuel piping etc complete as reqd.

Transportation charges of existing 1 x 62.5 KVA Diesel E/A set with sound proof enclosure complete with all other accessories from Sector-19, Noida to T.E Shahadra East, Gzb with the help of specialize man power and crane i/c loading unloading etc complete as reqd. (Approx. distance 15 Kmtrs)

I.T.C of existing 1 x 62.5 KVA diesel E/A set in sound proof enclosure along with all accessories on existing foundation in T.E Bldg. Shshdara East, Gzb i/c connection of power cable, fuel piping, exhaust piping, control cable etc complete as reqd.

S.I.T.C of dust & vermin proof cubical type Junction Box fabricated out of 1.6 mm C.R.C.A. sheet with hinged type door, powder coating after treatment of CRCA sheet i/c cable terminations of Incoming cable & outgoing cable on the suitable size Al. Busbar for suitable of 100 Amp. (Size Approx. 600 x 600 x 300 mm) (i) Aluminum Busbar (ii) LT Supply PVC Insulation

Sub-Head (II) S.I.T.C of submersible pump motor set capable of discharging 10000 LPH of a total head of 77 mtr (From all clauses) the pump shall be multistage of 2.0 HP totally enclosed submersible motor on common shaft suitable for operation on single phase complete with all accessories etc as reqd. The pump shall consist mechanically balanced stainless steel shaft suction chamber provided perforated strainer etc complete with all other accessories. The electric motor winding shall have a non aging water proof insulation resistant to chemical effect having high strength motor pump shaft supported in water lubricated bronze plain bearing bushes with special self aligning shaft assembly end cap etc complete as required. (Model- CORA 4C/15 or SS Make)

S/Fixing of 3 core 2.5 Sqmm submersible PVC insulated PVC sheathed flat copper conductor cable complete with connection at the starter & weather proof termination on the submersible motor complete as required. (ISI mark)

Charges for lifting and lowering for the existing 1.5 HP Submersible pump by the specialize man power with the help of chainpulley/trypot etc. as reqd.

Repairing of control panel wiring for existing 2.0 HP Submersible pump i/c replacement of faulty starting capacitor and running capacitor of suitable capacity etc . as reqd.

Supplying and fixing 2 waysheet steel enclosure dust protected, duly powder painted with 20 amps "C" curve, SP&N MCB on surface or in recess complete with connections, testing and commissioning etc. as required.