IMPROVEMENTS OF SREE ISHWARA TEMPLE IN KARAGUNDA VILLAGE IN KARAGUNDA GP IN ARASIKERE TALUK

IMPROVEMENTS OF SREE ISHWARA TEMPLE IN KARAGUNDA VILLAGE IN KARAGUNDA GP IN ARASIKERE TALUK

Earth work excavation for Foundation by manual means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing and laying in position Cement Concretefor levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, CO...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE ...

Providing and laying in position Cement Concrete for all Foundation works.The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 percent and conforming to I.S. 15622,of approved make, in all colours & shade, over ...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete o...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied at 2.20 kg/10 ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...