REPAIR AND REPLACEMENT OF INTERNAL ELECTRIFICATION WITH CONNECTED MISC ITEMS UNDER AGE B/R RND SECUNDERABAD

Amount

M&L for Point wiring complete with and including 1.5 sq. mm (nominal area) single core multi stranded HRFR copper conductor PVC insulated unsheathed cable 1100 volts grade ISI marked drawn through including concealed non metalic rigid PVC conduit with accessories such as bend, tees, junction boxes etc. suitable modular boxes for mounting fittings like modular switches, modular sockets and fan regulators etc with modular sheet covers including one run of 1.5 Sqmm PVC insulated and unsheathed multi stranded HRFR copper conductor as green colour earth wire and connected to common earth dully including taking down old unserviceable point wiring complete all as directed for the following:-

One light/fan point controlled by one switch

One 3 pin socket outlet 5A on independent board

One 3 pin socket outlet 5A on same board.

All as per item No.01 here-in-before but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core (multistranded) copper conductor cable for socket outlet 15 Amp on one independent board.

M&L point wiring with 4 Sqmm multistranded PVC insulated unsheathed copper conductor HRLS grade including 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dully concealed in wall, suitable metal flush box for fixing of switch sockets including suitable size modular plates and necessary electrical connections,modular type 4x5 Amps, 05 pin multipurpose switch & socket outlet & 1x 15 Amps multipurpose switch socket in one switch board including takind down the old existing power point complete all as directed. Note:- The above is considerd as one job and the Cost of 04 Nos of switch sockets of 5 Amps, 01 No switch socket 15 Amps with suitable size modular cover & frame/Plate of approved colour , Metal flush boxes of suitable type, is deemed to be included in the quoted rate.

S&F Modular Switch one way 6 Amps, 1 module complete all as directed.

S&F Modular Socket 2 module for 2 / 3 pin 6 Amp complete all as directed.

S&F Modular Switch one way 16 Amps, 1 module complete all as directed.

S&F Socket 2 module 2in1, 3 pin, 6 and 16 Amp, complete all as directed .

S&F ceiling rose PVC / polycorbonate isolated body 3 terminals with base plate ISI marked complete all as directed.

S&F step type Modular Electronic fan regulator 120W complete all as directed.

S &F Exhaust fan 230V 50 Hz 300mm sweep with louvers including taking down old unserviceable exhaust fan and depositing the same in MES store compelete all as directed.

S & F Ceiling fan 230V 50 Hz 1200mm sweep BEE 5 star rated energy saver including taking down old unserviceable ceiling fan and depositing the same in MES store complete all as directed.

S & F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=20W, luminaire lumen >2000 lm, system efficiency of > 100 lumens/W, LED, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 degree C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L7O criteria, multi stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification including taking down old unserviceable light fitting of any description complete all as directed. Make:- Wipro Model No. LL20-281-XXX-65AL1 or Havells Cat Part No. ENDURA LINEAR NEOBU20WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj

S & F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=10W, luminaire lumen >1000 lm, system efficiency of > 100 lumens/W, LED, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 degree C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L7O criteria, multi stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification including taking down old unserviceable fitting of any description complete all as specified and directed. Make:- Wipro Model No. LL20-111-XXX-65-NE or Havells Cat Part No. ENDURA LINEAR NEOBU10WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj

S & F 2" x 2" recess mounted full panel LED luminaire with white powder coated housing acting as heat shrink and frame in CRCA sheet, high efficiency LED grade diffuser , in built electronic driver duly wired up to terminal block, power consumption< 36W, luminaire lumen > 3500lm and system efficiency >120lm/W, CRI>80, LED, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, colour temp -5700K, Ingress protection IP 20, , driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 500C, power factor >0.95, THD < 10% , surge protection in CM -3 KV, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification including taking down old unserviceable light fitting of any description complete all as directed. Make:- Wipro Model No. CRCO10R038HP57GL1 or technocomercially equivalent model of Philips/Bajaj

S&F in repairs LED mirror light fitting 7 watts including taking down old unserviceable light fitting of any description complete all as directed. Make: Crompton model no. LCL-07-CDL technocomercially equivalent model of Philips/Bajaj

S & F LED post top lantern fitting with die cast aluminium housing & decorative clear opal acrylic diffuser and IP-65 and all fixing accessories including PVC multistranded flexible copper cable 3 core 1.5sqmm from junction box to fitting connector and taking down old unserviceable post top lantern fitting complete all as directed. Make: BAJAJ cat part No.BGCTW4LEDWW240 V50 Hz104 LED or Equivalent in WIPRO/PHILIPS

S&F full glow, (4 ft) luminaire, glare free and provision of cable from ceiling rose to light fitting including taking down unserviceable light fitting complete all as directed. Make :- Philips model No. RC380B LED32S-6500 L120W 30 PSU OD or techno commercially equivalent in WIPRO / HAVELLS .

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 6 sq.mm 2 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 10 sq.mm 4 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 25 sq.mm 4 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 35 sq.mm 3.5 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 50 sq.mm 3.5 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 70 sq.mm 3.5 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 95 sq.mm 3.5 Core including taking out old unserviceable cable complete all as directed. Make: HAVELL’S / UNIVERSAL /NICCO /GLOSTER

Supply and laying 40 mm bore GI tubing light grade in trenches for protection of cable at road crossing including taking out old unserviceable pipe complete all as directed.

Eaxcavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out soft/loose for laying of under ground pipe /cables line all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick using soil complete all as directed.

Removing of excavated material to a distance n exc 50 metres and depositing where directed at a level n exc 1.5metres above stating point complete all as directed.

S&F river sand for filling in trenches below and above UG cable for cushioning of cables complete all as directed.

M&L for laying in trenches fly ash bricks of size 230x115x75mm complete all as directed.

M&L for cable jointing kit for 11000Volts (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm including taking out old unserviceable cable jointing kit complete all as directed.

M&L for cable jointing kit for 11000Volts (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm including taking out old unserviceable cable jointing kit complete all as directed.

M&L for cable jointing kit for 11000Volts (Earthed) grade cable for straight through heat shrink type joint complete with jointing material suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm including taking out old unserviceable cable jointing kit complete all as directed.

M&L for cable jointing kit for 11000Volts (Earthed) grade cable for straight through heat shrink type joint complete with jointing material suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm including taking down unserviceable cable jointing kit complete all as directed.

M&L for cable jointing kit for 11000Volts (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm including taking down unserviceable cable jointing kit complete all as directed.

S&F LED street light luninaires 45 Watt with pressure die cast aluminium housing , Heat resistant toughened glass with frame and IP 66 protection including taking down old unserviceble light fitting of any type complete all as directed. Make: Crompton Cat part No. LSTP -45-CDL /Equivalent in Philips/Havells

S&F LED street light luninaires 60 Watt with pressure die cast aluminium housing , Heat resistant toughened glass with frame and IP 66 protection including taking down old unserviceble light fitting of any type complete all as directed. Make: Crompton Cat part No. LSTP - 60 -CDL /Equivalent in Philips/Havells

S&F cable 3 core PVC insulated unsheathed multistranded copper conductor of size 2.5 Sqmm passing through and including PVC conduit from junction box to fitting including taking out old unserviceable cable complete all as directed.

S&F cable 2 core PVC insulated unsheathed multistranded copper conductor of size 2.5 Sq mm passing through and including PVC conduit from junction box to fitting including taking out old unserviceable cable complete all as directed.

S&F Master LED tube integrates LED light source (with frosted cover into traditional linear fluorscent from delivering 50% energy saving) including taking down existing tubelight & electronic ballast complete all as directed. Make : Philips model No. MAS LEDtube 1200mm 18W865T8I or techno equivalent in WIPRO / HAVELLS .

S&F CFL Non retrofit 11W,2 pin including taking down unservicable CFL complete all as directed.

S&F CFL Non retrofit 18W,2 pin including taking down unservicable CFL complete all as directed.

S&F CFL Non retrofit 36W,4 pin including taking down unservicable CFL fitting complete all as directed.

S&F SP&N sheet metal enclosure 240 V with two pin and earth plug and sicket with one single pole MCB 20 Amps including taking down unserviceable sheet metal enclosure complete all as directed.

S&F Electronic ballast suitble for 2 x TL36 watt complete including taking down unservicable Electronic ballast complete all as directed.

S&F Switch piano flush type singel pole, one way, 6 amps including taking down unservicable switch complete all as directed.

S&F Switch piano flush type singel pole, one way, 16 amps including taking down unserviceable switch complete all as directed

S&F Switch socket combination 2 in 1,3 pin 5Amps and 15 Amps fiush type including taking down unserviceable socket complete all as directed.

S&F Switch socket combination 2 in 1,5 Amps fiush type including taking down unserviceable socket complete all as directed.

S&F plug top 16 Amps,3 pin 230 V including taking down unserviceable plug top complete all as directed

S&F plug top 6 Amps,3 pin 230 V including taking down unserviceable plug top complete all as directed.

S&F Ding Dong bell AC 230 V including taking down unserviceable bell complete all as directed.

S&F Electronic voltage stabilizer of 5 KVA capacity (suitable for wall mounted) for automatic operation, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% including taking down unserviceable stabilizer complete all as directed. Make - V-GUARD / KEELINE / BLUE GUARD

S&F 4 pole MCCB 630 Amps 50Hz 415 volts with a rapturing capacity of 25 KA including taking down unservicable MCCB complete all as directed.

S&F lamp holder, PVC/poly carbonate type with back plate suitable for batten fittings complete including taking down unserviceable lamp holder complete all as directed.

S&F Surface mounting metal flush box 3 module including 3 modules inner plate & outer cover and taking down unserviceable metal box complete all as directed

S&F Surface mounting metal flush box 6 module including 6 modules inner plate & outer cover and taking down unserviceable metal box complete all as directed.

S&F surface mounting metal flush box 8 module including 8 module inner plate & outer cover and taking down unserviceable metal box complete all as directed

S&F 3 pole MCCB 100 Amps 50Hz 415 volts with a rapturing capacity of 16 KA including taking down unservicable MCCB complete all as directed.

S&F for distribution board made of sheet metal SPN 8 way with 200 Amps rated bus bar with metal door including taking down unserviceable distribution board complete all as directed.

S&F for distribution board made of sheet metal TPN 4 way with 200 Amps rated bus bar with metal door including taking down unserviceable distribution board complete all as directed.

S&F for MCB TPN 63 Amps 415 volt, 'C' curve,10KA including taking down unserviceable MCB complete all as directed.

S&F for MCB SPN 40 Amps 240 volt, 'C' curve,10KA including taking down unserviceable MCB complete all as directed.

S&F for MCB SP 06 to 32 Amps 240 volt, 'C' curve,10KA including taking down unserviceable MCB complete all as directed

S&F aluminium 2 core 6 Sqmm service wire including taking down unserviceable service wire complete all as directed.

S&F aluminium 2 core 10 Sqmm service wire including taking down unserviceable service wire complete all as directed.

M&L for taking down ceiling /exhaust/pedestal/wall mounted fans of existing makes and sizes for repairs and installing in its original position after repairs including provision of cable from ceiling rose or connecter to fan complete all as directed

Dismantling of fans for rewinding with super enameled copper wire as per existing gauge /number of turns including heat varnish, overhauling and testing complete all as directed for fans of the following sizes:-

Ceiling fan 1200 / 1400 mm

Exhaust fan 230 /300 mm

Pedestal/Wall mounted fan 400 mm

S&F following spare parts for ceiling /exhaust fans of different makes and sizes and taking down unserviceable spare parts complete all as directed.

Copper Bush

Ball bearing NO.6201

Ball bearing No. 6202

Ball bearing for exhaust fan & pedestal fan Make for item Srl No. 70.02 to 70.04: SKF/TATA

Condensor 2.5 MFD

Condensor 3.15 MFD Make for item Srl No. 70.05 & 70.06: Universal /Capco

Rubber bush

Canopy

Condensor stand

GI nuts, bolts and washers

Ceiling fan blade 1200 mm.

Exhaust fan blade 230/300 mm

M&L for two coats of synthetic enamel paint by spraying over a coat of red oxide primer after complete scraping of the old paint, filling cavities with filler and cleaning all dusts etc., including writing MES number complete for following:-

Ceiling fan 1200 /1400mm

Exhaust fan 230/300mm

M&L for taking down geysers of different makes of 25/50 ltrs capacity for repairs and installing in its original position after repairs with new bolts, nuts and washers complete all as directed.

M&L for taking out copper inner shell from the geyser of 25/50 ltrs capacity of any make, arresting leakage by copper brazing including cleaning , provision of new rock wool and testing complete and fixed in the same position complete all as directed.

S&F following spare parts for geysers and taking down unserviceable spare parts complete all as directed.

Thermostat suitable for geyser 25/50 ltrs capacity.

PVC hose for hot /coldwater 450mm long with brass end nuts (ISI marked) suitable for 15mm dia GI tubing complete.

Heating element 2 KW ( Horizontal/Vertical)

Indicating lamp (Red/Green)

S&F bracket made out of GI pipe 40mm bore, medium grade bent to shape inclusive of two coats of aluminium paint over a coat of primer and taking down unserviceable bracket complete all as directed.

S&F 4 pole MCCB 100 Amps 50Hz 415 volts with a rapturing capacity 16 KA including taking down unservicable MCCB complete all as directed

S & F 4 pole MCCB 250 Amps 50Hz 415 volts with a rapturing capacity 25 KA including taking down unservicable MCCB complete all as directed.

M&L for submain wiring with two run of 4Sqmm PVC insulated, unsheathed cable with multistranded HRFR copper conductor drawn through and including PVC conduit of 25mm dia with one run of 4sqmm PVC insulated copper earth continuty conductor coneecting to common earth dolly & taking down old submain wiring complete all as directed. Note : Three runs of 4 sqmm cable and one run of conduit shall be measured and paid as one unit length.

Supply install, testing & commissioning of LT panel board made out of 3.15mm thick CRCA sheet conforming to IS-8623, indoor cubical type, totally enclosed weather, dust & vermin proof with front and rear opening, double door, 415 V, 3 phase, 4 wire, AC 50 Hz having copper bus bar of capacity 400 Amps for 3Ph(RYB) & 400 Amps for Neutral, insulated with PVC sleeves coloured in RYB & black complete with copper conductor internal wiring & foundation with 75x75x6 mm thick angle iron frame grouted in PCC 1:3:6 upto hight specified by Eng-in-charge and as directed including painting all over internally and externally with poweder coated paint including provn of the following items: (B- block basement panel - 2)

(a) MCCB with micro processer based realease RHOM of capacity 4 pole 630 amps, 415 V 50 Hz with rupturing capacity 35KA, electrical drawout type. = 01 No (For Incoming) (b) MCCB of capacity 200 amps 4 pole, 415 V 50 Hz with rupturing capacity 25KA. = 02 Nos (c ) MCCB of capacity 250 amps 4 pole, 415 V 50 Hz with rupturing capacity 25 KA. = 01 No (d) MCCB of capacity 100 amps 4 pole, 415 V 50 Hz with rupturing capacity 16 KA. = 04 Nos (f) Main busbar Aluminium 600 Amp capacity set (g ) Digital type multy function meter Volt and Ammeter with CTs - 01 set. (h ) Phase indicator lamp with switch control = 03 Nos

S&F in repairs inner tank made of MS sheet 1.60 mm thick suitable for 25 Ltr geyser complete all as directed

S&F in repairs inner tank made of MS sheet 1.60 mm thick suitable for 50 Ltr geyser complete all as directed

S&F in repairs vent assembly suitable for 25 Ltr geyser complete all as directed

S&F in repairs vent assembly suitable for 50 Ltr geyser complete all as directed

S&F in repairs outer body suitable for 25 Ltr geyser complete all as directed

S&F in repairs outer body suitable for 50 Ltr geyser complete all as directed.

M&L Earthing complete with GI earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground vertically to a depth of not less than 2.25 m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4 mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', watering pipe 20mm dia GI pipe 'medium grade', GI wire mesh, funnel, alternating layer of charcoal and salt on all sides to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earth work,PCC chamber in PCC (1:3:6) type C-1 earth chamber, 40mm thick cover in RCC (1:2:4) type B1 with 8 mm dia TMT bars @150 mm c/c both ways complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as specified and as directed.

Outsourcing of services for maintenance of entire external water supply system, and operating of pump sets submersible/ monoblock/ centrifugal of any capacity, gate valves, controlling supply of water to quarters. repairs of gate valves, pump sets including recording of necessary data in record books and plant running records, located at Pratap colony on all days including Sundays & Holidays in two shifts (1st shift from 0500h to 1300h & 2nd shift 1300h to 2100h) complete all as directed. a) Man power to be employed : 01 Valveman - per shift

Note for item srl No 89 : (a) In case of requirement, tradesmen provided for one area may be utilised in other areas at the discretion of department, without any extra cost to department as directed. (b) Materials which are required for the maintenance shall be supplied by the department free for fixing only. The labour element for the same shall deemed to be included in the quoted rate. (c) Tools and plants, cotton waste required for maintenance shall be supplied by the contractor and cost of same shall deemed to be included in the quoted rate. (d) The contractor shall supply uniform to their employees for wearing during working hours of shift. The uniform shall be pant and shirt and shall be in blue colour. The pattern of uniform shall be as decided by GE. The quoted rate shall deemed to include this provision.

(e) In case of absence of trademen during any shift, continuously late for a period exceeding 15 minutes, double the market rate of labour shall be recovered from the due payments of the contractor. (f) Departmental equipments of each installation shall be under safe custody of the contractor, In case of theft/misuse of the equipment, the cost of same shall be recovered from the due payment to contractor. (g) Minimum wages certificate with attendence register, wage register and proof of payment through bank which was paid to labour shall be got verified by Engineer-in-charge before submission of RAR/FB for releasing of payment in RARs and final bills. (h) Valveman should be ITI qualified with similar field experiance age not more than 60 Years of all staff employed shall be submitted.

(j) The rate quoted shall be deemed to include for leave reserve / off of the staff employed. (k) Each employee shall be facilitated with adhoc bonus privilage as applicable in accordance with Govt. of India and the same to be deemed to be incuded in the quoted rate. Documentary proof of duly signed by contractor / contractor's representative. and individual to be forwarded.

vvcenterprises

Mavee Syndicate

MAHEASWARI TECH

M/S PAVANI ENTERPRISES