Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹36.2 L+₹1.5 L (4.17%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹39.1 L+₹4.4 L (12.5%)Rejected-Finance NO 1 4 56 Y SRI BHARATHI NAGAR OPP PARVATHI THEATER CUMBUM ROAD THENKARAI PERIYAKULAM THENI DT 625 601 | PERIYAKULAM | THENI | TAMIL NADU | 625601 | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹41.6 L+₹6.8 L (19.7%)Rejected-Finance | L4 | Rejected-Finance Not L1 | |
| 5 | L5₹43.3 L+₹8.5 L (24.6%)Rejected-Finance BUILDING NO FLAT NO 19 6TH CROSS ROAD SANJEEVINI NAGAR MUDALAPALYA BANGALORE 560072 | BANGALORE | BANGALORE | KARNATAKA | 560072 | L5 | Rejected-Finance Not L1 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
22 Nov 2022, 6:00 pmClosed
GE(South) Bangalore
GE(South) Bangalore
REPAIR REPLACMENT AND MAINT OF INTERNAL ELECTRIFICATION OF OTM ACCN FOR ZONE ATO E MD ACCN FOR FMCC, SUOE, HAUDDIN ROAD, BD BK , MARSHAL BK AND WELCOME MAINT OF OFFICERS MD ACCN AT FMCC, SUOE, CUBBON ROAD REST HOUSE UNDER AGE B/R (C) OF GE(SOUTH) B
2022_MES_547462_4
8613/E8
Open Tender
Civil Works
Item Rate
180 days
Bangalore
As per tender document
6 documents required · 6 mandatory
₹500
GE(South) Bangalore
₹70,000
Yes
30 Nov 2022
14 Nov 2022
24 Nov 2022
14 Nov 2022
22 Nov 2022
15 Nov 2022
Amount
M & L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white washing including cleaning of splashes of white wash on floor / objects etc all as specified and as directed.
M & L for preparation of old distempered surfaces of ceilign and applying one coat of oil distemper all as including cleaning splashes of distemper on floor / objects etc all as specified and as directed.
M & L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including taking down plaster, including racking out joints, hacking for key scrubbing down with water etc and removing rubbish of the premises all as specified and as directed.
M & L for preparing of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
M & L for preparation of old plastered or unplastered surfaces of walls and cornices and applying one coat of white wash complete all as specified and as directed.
M & L for preparation of old plastered or unplastered surfaces of walls and cornices and applying two coat of white wash complete all as specified and as directed.
M & L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper including stopping of nail holes, filling of cracks etc and cleaning all window paness from splashes / dropping all as specified and as directed.
M & L for preparation of old distempered surfaces of walls and applying two coat of oil bound distemper including stopping of nail holes, filling of cracks etc and cleaning all window paness from splashes / dropping all as specified and as directed.
M & L for complete removal of existing tretment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of oil bound distemper over a coat of primer over 1mm thick birla wall care putty including stopping of nail holes, filling of cracks etc and cleaning all window panes from splashes / dropping complete all as specified and asdirected.
M & L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls, finished even and smooth without using extra cement including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and asdirected.
M & L for applying two coats of oil bound distemper on newly plastered surfaces including preparing the surfaces and applying one coat of alkali reistant priming paint complete all as specified and asdirected.
M & L for preparation of old painted surfaces of wood work and joinery exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and asdirected.
M & L for preparation of old painted surfaces of steel and iron work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and asdirected.
S &F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
S & F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and asdirected.
S & F in repairs 4mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and asdirected.
S &F in repairs Bib tap cast copper alloy 15mm, chromium plated screwed down, high pressure with capstain head, screwed down for iron pipe complete all as specified and asdirected.
S & F in repairs bib taps brass fancy type long body chromium plated for 15mm bore pipe or for brass ferrule or to GI socket complete all as specified and asdirected.
S & F 15mm bore diameter brass CP two way bib taps with crutch or butter fly handle screwed down screwed for pipe or for brass ferrule complete all as specified and asdirected.
S & F pillar tap brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or ' cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair complete all as specified and as directed.
S & F in repairs stop valves male / female threaded 15mm bore nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with capston head, screwed both ends for iron pipe / CPVC pipes or for unions complete fixed in repairs complete all as specified and as directed.
S & F in repairs Glass corner shelf including CP railing, radius 250mm complete all as specified and asdirected.
S &F in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, waste pipe 32mm dia brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and as directed .
S & F in repair vitreous china washdown water closet including internal fittings complete of size 710 x 390 x 790mm snow white colour washdown water closet pan & trap (One No) with soft close set cover with mild steel chromium plated or aluminium hinging device including all joints including connection to drain pipe complete all as specified and as directed.
S & F in repair toilet paper holder CP with flap guard complete all as specified and as directed.
S & F in repair PVC white low level flushing cistern 10 Ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short bens etc complete all as specified and as directed.
S & F in repair PVC flush pipe 32mm bore high density for low level flushing cistern including all joints, washers suitable pedestal type WC complete all as specified and as directed.
S & F sink with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar t odwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460mm bowl size 405mm x 355mm x 178mm (minimum) including PVC waste pipe 40mm dia complete all as specified and as directed.
S & F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and asdirected.
S & F in repairs 15mm size health faucet, ABS body with wall hook and 1meter stainless steel branded rubber hose pipe complete all as specified and as directed.
S & F in repairs brass chromium plated grating 125mm dia circular with centre hole / without hole of approved make and fixing with cement mortat 1:3 on Nahani trap or floor trap complete all as specified and as directed.
S & F in repairs swievel shower rose 15mm of brass chromium plated 150mm dia round with shower arm of 190mm long light body complete all as specified and as directed.
S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.
S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified.
S&F in repair 40 mm dia PVC waste pipe for SS Kitchen sink complete all as specified.
M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.
S&F in repairs fancy type brass bracket with screw 25 mm dia including wooden plugs
S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs
S&F in repairs fancy type aluminium powder coated curtain rods 25 mm dia
S&F in repairs 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.
S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.
S&F in repairs stainless steel 100 mm butt hinges for doors complete all as specified.
S&F in repairs Aluminium anoidsed barrel tower bolts of extruded section 150mm long.
S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.
S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.
M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc. complete all as specified and as directed. (a) One light/CB point controlled by one switch
(b) One fan point controlled by one switch.
(c ) One 3 pin 5 Amps socket outlet point on independent board
(d) One 3 pin 5 Amps socket point on the same board with other switches
(e) One light point controlled by two two way switches
All as per srl item no 50 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket complete all as specified and as directed.
M&L for point wiring with surface type with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through existing PVC conduit and fixed in sunk boxes and covered with 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/regulators etc. complete all as specified and as directed. (a) One light /CB point controlled by one piano type switch single pole one way.
(b) One fan point controlled by one switch.
(c) One 3/2 Pin 5 Amp socket out let point on the independent board.
(d) One socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.
(e) One light point controlled by 2 way switch 5 amp single pole.
All as per srl item no 52 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket complete all as specified and as directed.
M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.
M & L switch piano, flush type single pole, two way 15 Amps complete all as specified and as directed.
M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed.
M&L switch socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type complete all as specified and as directed.
M&L ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.
Supply and fix steped type electronic fan regulator flush type, 230 volt, AC complete complete all as specified and as directed.
M&L in repairs bell push, flush type, 5 Amps complete all as specified and as directed.
M&L in repairs call bell AC, 230 volts single pole complete all as specified and as directed.
S&F in reapairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 10 Amps all as specified and directed .
S&F in repairs MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.
S&F in repairs MCB DB for 8 way, double door 240 Volts 200Amps rated bus bar 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.
S&F in repairs MCB DB for 4 way, double door 240 Volts 200Amps rated bus bar 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.
S & F in repairs MCB TPN 415 Volt 63 Amps complete all as specified and as directed.
S & F in repairs MCB SPN 6 - 40 Amps, 240 Volts complete all as specified and as directed.
S & F in repairs MCB SP 06-40 Amp, AC, 240 volts complete all as specified and as directed.
M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi stranded copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit including taking down of existing wiring complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).
M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit including taking down of existing wiring complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).
S & F in repairs surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 5 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed by Engr-in-Charge.Make- Crompton cat part No- CCS-103-05-65-SL-DP-NWH or equivalant of Baja/Philips
S & F in repairs surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed by Engr-in-Charge.Make- Crompton cat part No- CCS-103-10-65-SL-DP-NWH or equivalant of Baja/Philips
S & F in repairs surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge. Make- Bajaj cat part No-BCLSB 20 WH / CG Cat Part No CCS-103-20-65-SL-DP-NWH or equivalant of Wipro/Philips
M & L in repairs earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed
Supply and fix of ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards, RPM1200,340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one and the same deposited to AGE E/M Store yard complete. Make - Bajaj Kassels 50 ISI Product code 250468 or equivalent make of Havells/CG
Supply and fix of Metal Body sound proof Exhuast fan 300 mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall or exsinting windo grill cutting and 12mm plywood suitable size of exaust fan make hole and fixing the window nutr bolt washers and after finishing work distrubed surface of wall including dismatling old one and the same deposited to AGE E/M Store yard complete all as specified and directed by Engr-in - Charge Make- Bajaj Product code 70003 or equivalant to Havells/CGUsha /Baja/CG
Supply and fix of Metal Body sound proof Exhuast fan 225mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall or exsinting windo grill cutting and 12mm plywood suitable size of exaust fan make hole and fixing the window nutolt washers and after finishing work distrubed surface of wall including dismatling old one and the same deposited to AGE E/M Store yard complete all as specified and directed by Engr-in - Charge Make- Bajaj Product code 70002 or equivalant to Havells/CGUsha /Baja/CG
S&F in repairs Plug top 3 pin 15A ISI marked all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F in replecement of surface bell push wsitch 6 amps all as specified and as directed. Make- Anchor
S&F in replacemnt of Modular Switch 1 Module 10 Amps all as specified and as directed. Make- Anchor
S&F in replacemnt of Modular Bell push 1 Module 10 Amps all as specified and as directed. Make- Anchor
S&F in replacemnt of Modular regulator 100Watt step type 2 Module all as specified and as directed. Make- Anchor
S& F in repairs Capacitor of rating 2.5/3.15 mfd 230 V all as specified and as directed.
S&F in repairs Heating element 1500/2000Watt round Type complete all as specified and as directed.
S&F in repairs Heating element 1500/2000Watt triangular type complete all as specified and as directed.
S&F in repairs Thermostat for 25/50 Ltr cap geyser and making connection all as specified and as directed.
S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450mm all as specified and as directed.
S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 600mm all as specified and as directed.
S&F in repairs Switch Piano Type 5 Amps all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F in repairs Switch Piano Type 15 Amps all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F Socket outlet 5 Amps all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F Socket outlet 15 Amps all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F Socket combine 5 Amps all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F Socket combine 15 Amps all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F in repairs 5 Amp Gang box complete all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F in repairs 15 Amp Gang box complete all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F in repairs Fan Regulator switch type all as specified and as directed. Make- Anchor /Plaza/Kinjal
S&F in repairs Fan Regulator socket type all as specified and as directed. Make- Anchor /Plaza/Kinjal
S & F Insulation Tape 20Mtr length all as specified and as directed.
S&F in replacement PVC copper cable 1.5 sqmm 180 RM length all as specified and as directed. Make- Anchor
S&F in replacemnt PVC copper cable 2.5 sqmm 180 RM Length all as specified and as directed. Make- Anchor
S&F in replacement PVC copper cable 4 sqmm 180 RM Length all as specified and as directed. Make- Anchor
S&F in replacement PVC flexible twin core wire 1.5sqmm copper 45 RM Length all as specified and as directed. Make- Anchor
S&F in repairs LED Bulkhead light fitting 10 Watt Environmental friendly , ultra modern , energy saving , surface mounted , decorative oval bulk haed edge lit LED luminarie comprising of high brightness LEDs including connetcion of fllexible copper wire 2 core from fitting ceiling rose/connection point complete all as specified and as directed. Make- Crompton cat part No- LBHP -10-CDL or equivalant of Wipro/Philips
S & F in repairs LED recess mounting 2x2 fittings full fit luminarie with glare free uniform illumination with longer life and less maintainance 36 Watt complete all as specified and as directed. Make- Crompton cat part No LCTLRFF7-36-CDL or equivalent of Bajaj/Philips
S&F in repairs Plug top 3 pin 15A ISI marked complete all as specified and as directed. Make- Anchor /Plaza/Kinjal
S & F in replacement of modular switch 1 way 6Amps 1 module all as specified and as directed.
S & F in replacement of modular switch 1 way 16Amps 1 module all as specified and as directed.
S & F in replacment of modular Socket 6A - 2/3 pin combined 2 module all as specified and as directed.
S & F in replacment of modular Socket 6A / 16A - 2/3 pin combined 2 module all as specified and as directed.
S & F in replacment of modular fan regulator 120W, 2 module complete all as specified and as directed.
S & F in replacment Service cable PVC aluminium stranded conductor cable 2 core 6 Sqmm complete all as specified as directed.
SREE CONSTRUCTIONS
PRIYADARSHINI CONSTRUCTIONS
M.G. Enterprises
RAHUL ENTERPRISES
HARSHITHA INFRA
PRAGATHI BUILDERS
Varsha Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .