COMPREHENSIVE MAINTENANCE AND REPAIR OF SONAR ENCLAVE UNDER GE (A) JAISALMER

Amount

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good required shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge.

S&F spray duco painted pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified and as directed by the Engineer-in-Charge. Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items.

S&F spray duco painted pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified and as directed by the Engineer-in-Charge. Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge.

S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in the door at site as per specification :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf Note :- The cost of SS butt hinges, SS tower bolt and SS handles shall be deemed to be inclusive in the unit quoted rates.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in door at site as per specification :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stopper - 1 No per leaf Note :- The cost of SS butt hinges, SS tower bolt, SS handles sliding door bolt/Aldrop and door stopper shall be deemed to be inclusive in the unit quoted rates.

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40 mm) complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in door at site as per specification :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf Note :- The cost of SS 304 grade wire cloth, SS butt hinges, SS tower bolt, SS handles, SS Sliding Door Bolt/Aldrop and SS Door Stopper shall be deemed to be inclusive in the unit quoted rates.

S&F in repair stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed by the Engineer-in-Charge.

Taking down aluminium door/ windows incl frames and complete fittings of area exc 1.00 sqm but n. exc 4 sqm complete all as specified and as directed by the Engineer-in-Charge.

S&F providing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 x 44.45 x 1.29 mm and shutters made of 63.5 x 31.75 x 1.29 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36 mm dia and 1.40 mm aperature in inner shutters complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in window at site as per specification :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 2 nos per leaf (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Note :- The cost of 5mm thick glass, SS 304 grade wire cloth, SS butt hinges, powder coated aluminium tower bolt and powder coated aluminium handles shall be deemed to be inclusive in the unit quoted rates.

S&F Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) complete all as specified and directed by engineer-in-charge.

S & F in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod and including 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and as directed by the Engineer-in-Charge. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F in repair of 3 mm Fibre-reinforced plastic sheet of transparent colour of any of size including necessary screw and other accessories including hacking out the same from window or door frame complete all as specified and as directed by the Engineer-in-Charge. Note: Cost of Scaffolding for change of sheet upto four story building also include in the rate.

S&F in repair 6mm thick of size 600x450looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and as directed by the Engineer-in-Charge.

S&F MS hollow rectangular/square/circular tubes/pipes of YST 310 Grade as in frame work for roofs/rafters/purlins/chajjas/trusses/ columns/ struts etc and like similar items etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for mild steel framed work as in doors or gates of angle Gde-Fe-290( Gde-E-165) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified and as directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified and as directed by the Engineer-in-Charge.

S&F gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge.

M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and as directed by the Engineer-in-Charge. Note :- Frame work for ceiling shall be measured and paid separately.

S&F for Anodised aluminium snap grid of size of grid 605 x 605mm frame work for false ceiling complete all as specified and as directed by the Engineer-in-Charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work complete.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new surfaces of ceiling board and applying two coats of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of existing unserviceable RCC/PVC water tank and S&F for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of existing unserviceable RCC/PVC water tank and S&F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified and as directed by the Engineer-in-Charge.

Disconnecting existing tanks exc. 250 Ltrs but not exc. 500 Ltrs capacity PVC water tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by the Engineer-in-Charge. Note :- Cleaning repairing, etc. measured separately under relevant item

M&L for cleaning and removing, exc. 250 Ltrs but not exc. 500 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by the Engineer-in-Charge.

Disconnecting existing tanks exc. 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by the Engineer-in-Charge. Note :- Cleaning repairing, etc. measured separately under relevant item

M&L for cleaning and removing exc 500 Ltrs but not exc. 1000 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 25mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 type B 1 using 20mm graded stone agregate complete all as specified and as directed by the Engineer-in-Charge.

Dismantling and and taking down WC pan existing of any description/size and S&F vitreous china premium/1st quality wash down water closet pan floor mounting (Semi-pedestal pattern (Anglo Indian) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and including all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including fixing of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F. complete in all respect complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by the Engineer-in-Charge.

Dismantling and and taking down flushing cistern of any description/size and S & F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by the Engineer-in-Charge. Note : The items for counter will be measured and paid separately.

S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified and as directed by the Engineer-in-Charge.

S & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair angular stop cock fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends with wall flange for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by the Engineer-in-Charge.

Taking down or up existing GI tubing & connections and S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length complete all as specified and as directed by the Engineer-in-Charge.

Taking down or up existing GI tubing & connections and S&F 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore complete all as specified and as directed by the Engineer-in-Charge.

S& in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish fixed to wall complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge.

S & F CP Cockroch trap(127x127mm) with waste hole including taking out old and setting new one in CM 1:3 complete. complete all as specified and as directed by the Engineer-in-Charge. Make :- Prayag cat part No. FT-25 or equivalent make and model as approved by GE.

S&F PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and as directed by the Engineer-in-Charge.

Taking down old PVC floor trap and M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in floor complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as specified and as directed by the Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring / hard standing complete all as specified and as directed by the Engineer-in-Charge.

M& L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone agregate as in flooring complete all as specified and as directed by the Engineer-in-Charge.

M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes ccomplete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk

M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by the Engineer-in-Charge.

M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for 25mm thk PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base of floors & finishing the surface even & smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk

M&L for Granite of black / green / imperial red (colour as approved by GE) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and as directed by the Engineer-in-Charge. Note : Single piece should be used in steps/cills/jambs/shelves

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and as directed by the Engineer-in-Charge.

M&L for precast cement concrete block masonry with solid blocks of 1:3:6 type C-1 using 20 mm graded stone aggregate exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. Note : WPC will be measured and paid separately.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Supply only integral liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying 3mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers for receiving painting complete all as specified and as directed by the Engineer-in-Charge. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 150 mm size aluminium anodized handle fabricated type extruded section ISI mark complete all as specified and directed by Engineer-in-Charge.

S&F in repairs hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 150 mm size aluminium anodized bow handle fabricated type extruded section ISI mark complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs aluminum anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark complete all as specified and as directed by the Engineer-in-Charge.

Welding in repairs exc 2.5cm and not exc 5cm in length and thickness of metal to be welded not exc 6mm complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or unplasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old iron and steel surfaces of any shape and size over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for washing/rubbing down and stopping of distempered, plastered and painted surface of wall including cornices etc and making good of holes by filling holes in plastered surfaces with POP mixed with distemper with and applying one coats of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.

M&L for washing/rubbing down and stopping of distempered, plastered and painted surface of wall including cornices etc and making good of holes by filling holes in plastered surfaces with POP mixed with distemper with and applying two coats of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.

M&L perpartion of old existing wall surfaces including cornices, plastered or un-plastered surfaces by brooming down or steel wire brushing, moss efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint over and including filling up of holes by wall care putty wherever required complete all as specified and as directed by the Engineer-in-Charge.

M&L for painting circle of 200mm dia on surface of wall with two coats of synthetic enamel paint (black) & writing building number (eg-P-45 or P-80 etc) with synthetic enamel paint (white) with hight of latter 125mm and width 10mm all as directed

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping/concealed conduit, fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets , light fitting etc removing materials for taking credit and making good disturbed surface of walls,floors etc complete all as specified and as directed by the Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed by the Engineer-in-Charge.

Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 2.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping/surface conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box thickness as per IS standard (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 2.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No 104.00 here-in-before but for one bell/buzzer point controlled by one push botton complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 104.00 here-in-before but for one socket outlet 3 pin 5 Amps on the same board complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 104.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 104.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and as directed by the Engineer-in-Charge.

S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and as directed by the Engineer-in-Charge.

S&F switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and as directed by the Engineer-in-Charge.

S&F sockets outlet multipurpose 2 in 1, 5 Amps flush type confirming to IS complete all as specified and as directed by the Engineer-in-Charge.

S&F sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type confirming to IS complete all as specified and as directed by the Engineer-in-Charge.

S&F ceiling rose, PVC of size 65 mm x 18 mm two to three terminals (ISI marked) complete all as specified and as directed by the Engineer-in-Charge.

S&F bell push flush type 5 Amps complete all as specified and as directed by the Engineer-in-Charge.

S&F stepped type, electronic fan regulator on the existing phenolic laminated sheet etc as required complete all as specified and as directed by the Engineer-in-Charge.

M&L point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 2.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. and existing PVC Concealed conduit of 20 mm bore including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 2.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps complete all as specified and as directed by the Engineer-in-Charge. Note : Modular switch and socket shall be measured and paid separately.

All as per Item No. 116.00 here-in-before but for one bell/buzzer point controlled by one push botton complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 116.00 here-in-before but for one light point controlled by two, 2 way switches complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 116.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 116.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 116.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair modular switch 6 Amp 01 module , one way as per existing pattern modular complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair modular socket outlet, multipurpose, 6 Amps 3 pin combined 2 module as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair modular Bell push 6 Amps 1 module as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair modular Socket 16 Amps, 5 pin combined 2 module as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

S&F ir repair modular Switch 16 Amps one way 1 module as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair modular switch 6 Amps, two way, 1 module as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair modular fan regulator 5 step type, 2 module as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

M&L lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings including taking down unserviceable lamp holder of any description complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair bell AC single pole Ding Dong type 230 volt complete all as specified and as directed by the Engineer-in-Charge.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and as directed by the Engineer-in-Charge. NOTE: Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.

S&F LED box type Integrated Batten Wattage 20 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 / Test Report complete all as specified and as directed by the Engineer-in-Charge.

S&F LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F recessed/ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED, size 2ft x 2ft The product features color tuning from CCT 3000K – 6000 k, Surge Protector 4 KV, PF>= 0.95 , necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F LED building security light fitting 35 Watt (or above) 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver including thermal management in multiple optics complete with IP 65/66 protection complete with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair LED Bulb white E-27, 9 Watt of complete all as specified and as directed by the Engineer-in-Charge.

S&F MCCB DB VTPN 4 way 415 V double door IP 43 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified and as directed by the Engineer-in-Charge.

S&F sheet metal enclosure MCB DB TPN 4 way double door IP 43 with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed by the Engineer-in-Charge.

S&F sheet metal enclosure MCB SPN DB 12 way with 200 Amps rated bus bar 240 volts double door IP43 with magnitic locking system complete all as specified and as directed by the Engineer-in-Charge.

S&F sheet metal enclosure MCB SPN DB 8 way with 200 Amps rated bus bar 240 volts double door IP 43 with magnitic locking system complete all as specified and as directed by the Engineer-in-Charge.

S&F sheet metal and neutral enclosure single pole with two pin and earth plug and socket single pole MCB 20 Amps 240 volts fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 100 Amps with extended terminals complete all as specified and as directed by the Engineer-in-Charge. Note :- suitable size and frame of MCCB required as per existing DBs at site.

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 63 Amps to 100 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed by the Engineer-in-Charge.

S&F miniature circuit breaker (MCB) of single pole and neutral SPN 40 AMP to 63 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by the Engineer-in-Charge.

S&F miniature circuit breaker (MCB) of single pole SP 10 to 32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying of 1100 volts grade heavy duty service cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq.mm 2 Core including PVC conduit pipe nominal cross section in service connections complete all as specified and as directed by the Engineer-in-Charge.

M&L for PVC casing & caping of any type, size by means of shadles, clamps screwes to existing wall/ceiling and making good in all respect incl wiring inside all as shown specified and complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair of modular white cover plate with frame inner and outer plates complete all as specified and as directed by the Engineer-in-Charge for following sizes :-

(a) 2 modules

(b) 3 modules

(c) 4 modules

(d) 6 modules

(e) 8 modules

(f) 12 modules

S&F in repair plastic laminated bakelite sheet cover of hylem 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws and washer complete all as specified and as directed by the Engineer-in-Charge of following sizes :-

(a) 10" x 12" size

(b) 8" x 10" size

(c) 8" x 6" size

(d) 7" x 4" size

(e) 4" x 4" size

Attending of internal electrical Supply Complain, No light complain, repair/maint and making the continuity of supply after rectifying the defects of the electrical items such as Main DB's,switches, sockets, fan regulator, replacement of MCB (light/power), lamp holders (bracket/ batten), bell/buzzer, push button, ceiling rose, tube light fitting any type single pole/double pole, switch socket and plug combined, tube light fitting any type and other similar electrical items/fittings etc. complete all as specified and as directed by the Engineer-in-Charge Note :- Complain should complete the assigned job within 48 Hrs after receipt of the assignment. If the contractor fail to completed the assigned job in the given time recovery will be made Rs. 50.00 @ Per Job.Non reporting of trademen : 300/- per elect /Helper 200/- per helper per day .Providing of safty equipments to the electrician/labour will be responsibility of the contractor . Details of repair to be collected throughout the contract period from JE E/M at 0900 Hrs from office located at Mil stataion Area. Register of repair should be prepared by the contractor and details of repair to be updated in the register after completion of every repair work. Contractor will arrange vehicle, electrical tools, folding ladder, misc item like insulation tape, screws, nuts and bolts for repair work complete all as specified and directed.

M/S MAYA CONSTRUCTION COMPANY (BID ID -3142574)