Balance work for link road to village Thana

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD 2014 technical specification clause 1603 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of embankement with approved material obtained at site from roadway cutting and excavation from drain and foundation of other strcutres graded and compated to meet requirement of table 300.1 and 300.2 with all leads and lifts as per technical specification MORD 2014 clause 301 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site, spreading grading to required slope and compacted to meet requirement of table 300.2 as per technical specification MORD 2014 clause 303, as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification MORD 2014 clause 305 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate) 25mm (twenty five millimetre) nominal size in foundation and plinth of Toe wall and catch pit complete as per drawing and technical specifications MORD 2014 Clause 802, 803, 1202 & 1203 as per the direction of the Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Back filling behind abutment , wing walls and return walls complete as per drawings and technical specification MORD 2014 Clause 1204.3.8.Granular Material and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 100mm ( One hundred millimetre ) dia PVC pipe Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogramm ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and technical specification MORD 2014 clauses 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying of boulder apron laid in wire crates with 5mm(five millimetre) dia G.I. wire (Galvanized iron wire) confirming to IS:280 (IS: two hundred eighty) and IS:4826 (IS : four thousand eight hundred twenty six) in 100x100mm(one hundred into one hundred millimetre) mesh (woven diagonally) including 10(ten) percent extra for laps and joints laid with stone boulders weighing not less than 25kg(twenty five kilogramme) each as per drawing and technical specifications clause 1301 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in drains and open foundation for all type of structures complete of plain cement concrete CC 1:3:6 (one cement:3 sand:6 graded stone aggregate) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification MORD 2014 clause 802, 803, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in substructure for all type of structures complete of plain cement concrete grade M-15 (M-Fifteen) of design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification MORD 2014 clause 802, 803, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in superstructure for all type of structure complete of reinforced cement concrete Grade M-20 (twenty) of design mix with minimum cement content 350kg. ( three hundred fifty kilogram) per cubic metre including the cost of form work as per drawings and technical specification MORD 2014 clause 802, 804, 805,806,807, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in super structure for all type of structures complete of reinforced cement concrete of grade M-25 (M-Twenty Five) of design mix with minimum cement content 300kg. ( three hundred kilograme) per cubic metre including the cost of form work as per drawings and technical specification MORD 2014 clause 802, 803, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement (Fe 415) in sub structure in all heights including cost of binding wire and cost for cutting, binding, bending and placing in position of bars complete as per drawing, technical specification MORD 2014 clause 1001, 1004 & 1206 and direction of Engineer-in-Charge, including entire carriage of materials within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure in all heights including cost of binding wire and cost for cutting, binding, bending and placing in position of bars complete as per drawing, technical specification MORD 2014 clause 1001, 1004 & 1401 and direction of Engineer-in-Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete of design mix Grade M-20 (twenty) with minimum cement content 330kg (three hundred thirty kilogram) per cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification MORD 2014 clause 802, 804, 805,806,807, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying (to level and slopes) 900mm dia (Nine hundred millimetre dia metre) reinforced cement concrete light duty non pressure pipe I.S. class NP-3 for culverts on first class bedding of granular material in single row including fixing collars with cement mortar 1:2 (One cement : two sand) but excluding the cost of excavation, protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and technical specification MORD 2014 clause 1108 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing 80mm (Eighty millimeters) heavy duty precast cement concrete interlocking paver blocks manufactured by the help of Hydro vibratory machine having compressive strength of M-40 (M-forty) grade as per IS-15658-2006. (N.T.C. make National Tile Corporation) including border or curve block grey or coloured. The paver shall be laid on 40mm (Forty millimeters) sand filling compacted as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (forty three) grade cement or any other type as per clause 1501.2. M-30(M-thirty) grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm (twenty five millimeters), mixed in a concrete mixer of not less than 0.2 (zero point two cubic metre) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealent, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grades as per drawing and MORD 2014 technical specification clause 1501,as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and Erecting Type -A "W" metal beam crash barrier as per MORTH specification 2013 clause 811 comprising of 3 mm ( Three millimetre) thick corrugated sheet metal beam rail to be kept 70 cm (Seventy centimetre) above road/ground level and to be fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) to be spaced 2 m (Two metre) centre to centre to be kept 1.80 mtr.(One point eight zero metre) high 1.1mtr.(one point one metre) below ground/ road level. All steel parts and fitments to be galvanised by hot dip process.All fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) and 330 mm (Three hundred thirty millimetre) long complete including all fitting required for erecting at road site of materials. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Scarifying the existing bituminous road surface with scarifying machine upto a depth of 150 mm (one hundred fifty milimetre) and disposal of scarified material as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of Gravel/soil aggregate base/sub base by providing well graded material nominal size maximum size grading 80mm (eighty millimetre) as per table 2.3 IRC SP 77-2008 spreading in uniform layers with Tractor mount appropriate grading arrangements on prepared surface, mixing by mix place method at OMC with Tractor mount appropriate rotavator attachment and compaction with three wheel 80-100KN static roller capacity to achieve the desired density, complete as per MORD 2014 Technical specification clause 402 contained in Para 2.2,3.6 and 3.7 of IRC SP-77 2008 (Using existing crust material from grade improvement) and as per dirction of Engineer-in-charge including carriage of material within all leads and lifts.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of Gravel/soil aggregate base/sub base by providing well graded material nominal size maximum size grading 80mm (eighty millimetre) as per table 2.3 IRC SP 77-2008 spreading in uniform layers with Tractor mount appropriate grading arrangements on prepared surface, mixing by mix place method at OMC with Tractor mount appropriate rotavator attachment and compaction with three wheel 80-100KN static roller capacity to achieve the desired density, complete as per MORD 2014 Technical specification clause 402 contained in Para 2.2,3.6 and 3.7 of IRC SP-77 2008 (By using Fresh material) and as per dirction of Engineer-in-charge including carriage of material within all leads and lifts. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty to hundred KN)weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetera as per Tables 400.11 & 400.12 and Technical Specification MORD 2014 Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and applying primer coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilogram per square metre ) using mechanical means as per MORD 2014 Technical Specification 2014 Clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surfaces treasted with primer and cleaned with hydraulic broom as per technical specification MORD 2014 clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying 50 mm( Fifty Millimeter) thick bituminous macadam using Bitumen VG-30 (thirty ) with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification MORD 2014 Clause 504 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick Semi dense bitumenous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 (thirty) at the rate 5.4 (five point four ) per cent of mix prepared with by weight of bitumen as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD 2014 Technical specification clause 509 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick semi dense bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 (thirty) at the rate 5.4 (five point four ) per cent of mix prepared with addition of Silane Nonotechology (ZycoTherm) at the rate of 2% ( two percent) by weight of bitumen in bitumen and filler as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification 2014 clause No. 509 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing 5th kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 grade of design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification 2014 Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing Ordinary kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 grade of design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and technical specification MORD 2014 Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding Goods Service Tax but inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing 200 (Two hundred) metre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 grade of design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and technical specification MORD 2014 Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Reinforced cement concrete M-15 (M-fifteen) grade of design mix with minimum cement content 240kg (two hundred forty kilogram) per cubic metre boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification MORD 2014 clause 1704 (Boundary pillars).as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5mm (one point five millimeters) thick supported on a mild steel angle iron post 75mmx75mmx6mm (seventy five milllimeters into seventy five millimeters into six millimeters) firmly fixed to the ground by means of properly designed foundation with M-15(M-fifteen) grade cement concrete 450mmx450mmx600mm (four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters) 600mm (six hundred millimeters) below ground level as per drawing and technical specification MORD 2014 clause 1701,as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Retro-reflectorised traffic signs 900x900x900mm (nine hundred into nine hundred into nine hundred millimetres).

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 2mm (two millimeter) thick with area exceeding 0.9 (zero point nine square metre) supported on mild steel angle iron posts 75mmx75mmx6mm, (seventy five millimeter into seventy five millimeter into six millimeter), 2 (two) nos, firmly fixed to the ground by means of properly designed foundation with M-15(M-fifteen) grade cement concrete 450mmx450mmx600mm (four hundred fifty millimeter into four hundred fifty millimeter into six hundred millimeter), 600mm (six hundred millimeter) below ground level as per approved drawing and technical specification MORD 2014 clause 1701. as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Direction and place indentification signs with size 900x600mm( nine hundred into six hundred millimeters)

Direction and place indentification signs with size 1200x900mm (one thousand two hundred into nine hundred millimeters)

Providing and fixing of typical PMGSY Logo as per MORD specifications and drawing. All M.S. will be stove enameled on both sides, lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 (Providing and fixing ' Logo' of PMGSY project double sided),as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing of typical PMGSY Citizen informatory sign board as per MORD specifications and drawing. Two MS plates of 1.6mm (one point six millimeter) thick duly welded with M.S. angle iron frame of 25mmx25mmx3mm. (twenty five millimeter into twenty five millimeter into three millimeter) the angle iron frame will be welded to 2 (two) number 75mmx75mm (seventy five millimeters into seventy five millimeters) of 12(twelve) SWG sheet tubes posts duly embedded in cement concrete M-15 (M-fifteen) grade blocks of 600mmx600mmx750mm (six hundred millimeter into six hundred millimeter into seven hundred fifty millimeter), 600mm (six hundred millimeter) below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 (Providing and fixing Citizen informatory board of PMGSY Project).as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Road marking with hot applied thermoplastic compound with refectorising glass board on bituminous surfaces providing and laying of hot applied thermoplastic compound 2.5mm (two point five millimetre) thick including reflectorising glass beads @ 250gms/sqmt. (two hundred fifty grams per square metre ) area thickness of 2.5mm (two point five millimetre) in exclusive of surface applied glass beads as per IRC 35. MORD 2014 technical specification clause 1702. The finished surface to be uniform and free from streaks and holes as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing road cat eyes complete as per drawing and technical specification clause of MORD specifications as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of parapets with cement concrete grade M-10 (ten) with minimum cement content 250kg. (two hundrede fifty kilogram) 40mm (Forty millimetre) nominal size and curing complete including the cost of form work with steel plates as per drawing and HPPWD, technical specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Planting containerized tree plants including pitting transplanting, composting and mulching on slopes 30º-45 pit size 60cm (sixty centimeters) dia meter x60 cm. (sixty centimeters) depth backfill with compost @ 0.0212(zero point zero two one two cubic meter/pit mixed with original soil (cost of plants, FYM shall be paid for separately,as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing containerized plants of appropriate species (size of plant should not be less than 60 cms) (sixty centimeters) including transportation from the nursery site to the of work, as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Supplying and stacking of well decayed farmyard manure all the site of work as per instruction by the Engineer-in-charge. The farm yard manure shall be free from earth, stone, brick bats and other extraneous stuff. The stacks of F.Y.M.should be 50 cms.(fifty centimeter) in height having volum not less than 3.00 cum (three cubic meter). The volume of the stacks shall be reduced by 8% (eight percent) for looseness to arrive at the net quantity for payment, as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Bamboo tree guard 1.80 meter (one point eight zero meter) high/ with 30 cms (thirty centimeter) dia with 4 Nos vertical strips (length 1.80 meter (one point eighty meter)Breadth 30mm (thirty millimeter), thickness 5mm (five millimeter) further weaving with different smaller size of vertical and circular strips. The weaved portion should be 125 cms.(one hundred twenty five centimeter) having 3 rings (three) at the top, bottom and middle portion. The first ring should be 55 cms (fifty five centimeters) above the 4 (four) thick vertical strips including strengthening with binding wire, as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Routine Maintenance for five years after completion of construction work as per item and condition of bid document of contract to general condition of contract and technical specification of MORD including haulage carriage of all labour transport and material to various location through all modes of transportations with in all leads lifts and other incidentals to entire satisfaction of Engineer-in-Charge. The rates are including Goods Service Tax, octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4th Year

AMC for 5th Year