PROVN OF WAITING ROOM AT CENTRAL MI ROOM AT FD HOSP, PROVN OF 07 X HARDSTANDING PLATFORM WITH SHED FOR GEN SETS AT FD HOSP AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R I UNDER GE PANAGARH

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n. exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

All as per ser item No 1.00 above but additional 1.5m or part thereof in depth beyond the first 1.5 m foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth but n.exc 3 Mtr depth and getting out in soft/loose soil complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm broken stone or boulders, deposited, spread and leveliled in layers n exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 ((Design Mix)) using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in chajjas and similar work complete all as specified & directed by Engr-in-Charge

M&L for Reinfocement cement concrete M-25 (Design Mix) using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F Mild Steel TMT bars 10mm and over, cut to lenghth, bent to shape requird, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engr-in-Charge.

All as per item No 11.00 herein before 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finihed surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

Form work to chajja and similar work including edges for rough finished surfaces complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for 40 mm thick Damp proof course in cement concrete type B-0, 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for brick work with flyash bricks straight or corve on plan to any radius in half bricks thick walls, built in CM (1:4) complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall finsihed even and smooth with out using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:4) using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall finished fair and even cement mortar complete all as specified and directed. (Note:WPC shall be measured and paid separately).

M&L for Rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces of ceiling finsihed even and smooth with out using extra cement complete all as specified and directed. .

Supply only Liquid water proofing compound complete all as specified and directed. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for applying two coat of OBD on decorated or un- decorated plastered or unplastered surfaces of wall over a coat of wall primer after providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for 100mm thick Cement concrete type B- 2,1:2:4 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 10mm thick Vitrified Ceramic light shade tiles (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15mm thick screed bed of CM (1:4) complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over and including rendering of 10 mm thick with CM 1:4 and pointed in white or colour cement to match the colour of tiles complete all as speciified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Machine cut kota stone 20-25mm thick in riser of steps, skirting, dado over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing on over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spd and directed by Engr-In-Charge.

M&L for 25mm thick PCC 1:2:4, type B-0 (Using 12.5 mm graded stone aggregate) as in padding on roof, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in CM 1:4 finished even and smooth without using extra cement and WPC complete all as specified and directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane(PU) accrylic based waaterr proofing liquied compound over and including one coat of self priming primer @ one litre per 10 sqm with reiforcing fabricc sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge. Note : As per description of this item, minimum two cots of Polyurethane (PU) acrylic based wate proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instrucions more coats of Polyerethane (PU) acrylic based waterr proofing liquid compound and primer are required for roof treatment. (ii) Quoted rate shall be included for work in building/struture of any height. (iii) To be applied by uthorised applicator.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed.

S&F door closer aluminium body, hydraulically regulated, designation No.2, universal type, suitable for door shutters and weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F brass mortice lock vertical type 100mm 4 lever fixed in aluminium door complete all as specified and directed.

S&F floor door stopper over all length of cover plate 140mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed.

S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

S&F butt hinges 100mm, medium weight, stainless steel all as specified and directed complete all as specified and directed

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

S&F 25mm bore harrison rails, anodised alluminium body, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and path/pavings etc finsihed even and smooth with out using extra cement complete all as specified and directed

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soils complete all as specified and directed.

M&L for Cement concrete type (C-2) 1:3:6 using 40mm grded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Providing and laying at or near ground levelfactory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F Machine pressed precast pre-polished coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L Preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and appling two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for returning, filling in and including spreading, leveling, watering & well ramming in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed.

M&L removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point in oft/loose soil complete all as specified and directed.

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/dense soil complete all as specified and directed.

S&F MS work as in posts, struts, roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel, flat & hollow sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.

M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soils complete all as specified and directed.

M&L for 300 mm thick kankar or laterite, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (i.e. 10% fly ash,30% clinker & 60 % stone dust) laying in layers n.exc 10cm thick, watering ramming and compacted to required camber and gradient complete all as directed by Engr-in-charge

M&L for 100mm thick PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for 100mm thick Cement concrete type B- 1, 1:2:4 (using 20mm graded stone aggregate) as in floors, finished even and smooth without using extra cement complete all as specified and directed..

M&L Forming Contraction (Dummy) jointa 65 mm deep x10mm wide, filled with sealling compound Á (Cold applied polysuiphide/polyurethane joint sealant will be used) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Chajja, fixed with self tapping screwscomplete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for applying three coat of whitewash on new plastered surfaces of wall complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over preparation of new surfaces complete all as specified. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. .

M&L for 75mm thick Cement concrete type D-2,1:4:8 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and directed.

M&L for Non-skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.

S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm wood grain printed PVC shee twith mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and botttom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium handle cast type, anodised, complete all as specified and directed

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Vitreous china wash down water closet pan, Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F 10 Ltr PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge

Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed

Supply & fix vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specifid and direted.

Supply and fix Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.

S&F CP health faucet with 1.50mtr long tube & hook with necessary all fixig arreangements to fix GI water pipe connections complete all as specified and directed by Engr-in-charge

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed.

S&F 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F PVC flexible urinal waste pipe 1/2 inch dia fixed to urinal stall waste coupling complete all as specified and directed

S&F Bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valve of 15mm bore, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

S&F CP tubular towel rail 20mm dia D type 60cm between two flange including bracket complete all as specified and directed by Engr-in-Charge

S&F PVC connection 15 mm size PTMT nuts of length ength 600 mm complete all as specified and directed

S&F soap dish vitreous china white size 160x160x90mm approx all as directed by Engr-in-charge

S&F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.

S&F 20 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall,laid in trenches or in floors complete all as specified and directed. .

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engr-in-charge

S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded stone aggregate all as specified and directed.

Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160 mm dia minimum 4mm thick incluing jointing with coupler, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. (Note:-Necessary PCC haunching/benching/packing shall be measured and paid separately).

E/M PORTION M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No.105.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.

All as per item No 105.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed . (For Same Board only)

S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.

S&F two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necesasry chasing, cutting and making good as per existing specification)

S&F Bldg security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

S&F Surface mounted type decorative light fitting 1 x 10W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.

S&F MCB SPN, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.

S&F MCB TPN 63 Amps, 'C' series 10kA, 440 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade of size 10 sqmm 4 core in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

Supply and install hi wall split units indoor/outdoor complete of capacity 1.5 TR with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating including PVC drain out pipe of size 15 mm dia(max length 4 mtr) & necessry connection testing complete, all as specified and directed. Make:-Blue Star/Carrier/Diakin

S&F copper wound wall mounted Voltage Stabilizer for automatic operation single phase neaturally air cooled indoor type & designed for input variation between 130V to 270V with output Voltage Stabilizer at 220V to 240V with accuracy of + 2% and of capacity of 4 KVA with necessry connection testing complete, all as specified and directed. Make:- V-Guard/Sen & Pandit.

S&F epoxy powder coated sheet metal enclosure for DBs, single door incl one MCB SP 240 V, 20 Amps with earth plug & metal top complete all as directed.

S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed

S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 2 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor, 1100 vlts grade , crsectional area 10 sqmm 2 core complete all as specified and directed Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks minimum three layers (Cylindrical, vertical with closed top) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed.

M&L for 20 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.

S&F 20 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 ltr incl pvc connecting complete all as specified and as directed. Make : Usha/Bluestar/Voltas

M&L for circuit Wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 2.5 Sqmm and one 2.5 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC conduit complete all as specified. (Note: (i) Three runs cable and PVC casing coping shall be measured and paid separetly (ii) Quoted rate shall be included for necesasry chasing, cutting and making good as per existing specification).

S&f GI pipe “Medium grade”, including fittings of size 15 mm (1/2”) dia. ISI marked complete all as specified and directed.

Drilling / tapping or cutting cast iron/ GI water mains (in position) for branch connections of the internal dia 40 mm complete all as specified and as directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine upto 80 mm dia suitable for 0.4 mpa working pressure complete as specified and directed.

S&F Angular Stop valve 15mm dia fancy type CP cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and as directed.

S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed. Make:- V-Guard/Sen & Pandit.

M/S SWAPAN KUMAR MONDAL

SHREE JAYAM ENTERPRISES

ANIMA ENTERPRISE

M/S KUMAR AVINASH

M/s Raj Kumar Chopra