Campus devployment ,Drainage work, Septic Tank, Pathway and New Construction Boundary wall at judicary colony Nawada for the year 2026-27

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved Engineer-in-charge,

Earthwork in rough excavation , banking excavated earth in layer not exceedin 20 cm in depth,breaking clods wateri g, rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3r dandtop most layer with power roller of minimum8 tonnes . lead upto 50 m and lift upto 1.5 m

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

centering and shuttering including strutting propping etc for foundation ,footing etc for mass concrtet

Centering and shuttering Suspended floors, roots, landings, balcnies and access platform

Centering and shuttering Suspended beam lintel etc

Centering and shuttering Suspended column etc

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size)1:2:4 (1 Cemen.2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand )

Brick work with fly ash bricks as per IS12894 (2002) & IS3495 in foundations and plinth in :

Brick work with fly ash bricks as per IS 12894(2002)&IS3495in foundations and plinth in

12mm cement plaster 1:3(1 cement:3 coarse sand) finished with a floating coat of neat ceme on brick wall.

6mm cement plaster to celling mix1:4

12mm cement plaster to celling mix1:6

15mm cement plaster to celling mix1:6

Providing and laying Ceramic glazed floor tiles300x300mm white, Ivory,Grey,Fume Red ,Brown , 20mmthickCementmotar 1:4(1cement: 4 coarse sand ) including pointing the jointswithwhite cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 of approved make inall colours, shades exceptbur gundy,bottle green,blackof any size as approved by Engineer-in charge in skirting, risers of steps and dadosover 12mm thick bed of cementMotar 1::3

Providing and laying inposition specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in wall (any thickness), including attachedpilasters,buttresses,plinthandstringcourses, fillets,columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement(1:1.5:3)

Reinforcement forR.C.C.work including straightening,cutting,bending, placing in position and binding all complete.

Steel work in built up tubular (round, squareor rectangular hollow tubes etc.)trusses etc., including cutting,hoisting, fixing in position and applyinga priming coat of approved steel primer,. complet

Providing and fixing 1mm thick M.S.sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete jncluding applyinga primingcoat of approv

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Finishing walls with Acrylic Smooth exterior paint of required shade

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm(±0.2mm),made out of single piece extruded PVC profile,with mitred cut joint sand joint with 2nos of PVC bracketofsize190 mmx100mm long arms of cross section size35x15mm&self drive

35mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5mm(±0.2mm) thick, having styles&rails(except lockrail)ofsize95mmx35mmx5mm.non decorative

Aluminium color profile with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050m

Constructing brick masonry road b gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm pre-cast R.C.C.horizontalgratingwithframe and vertical grating complete as per standard design :

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2(1cement:2finesand) in cludingtesting of joints etc. complete :

Making soak pit 2.5m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks and S.W. drain pipe100mm diameter, 1.8 m long complete as per standard design

Providing and fixing on wall face un plastidsed-PVC(working pressure 4kgf per sqm) rain water pipes conforming toIS:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

coupler 110mm dia pipe

bend 110mm

single tee 110x110x110mm

providing and placing on polyethylene water storage locking arrangement and making necessary holes for inlet,outlet and over flow pipes but without fittings and the base support for tank.

providing and fixing gun metal gate valve with CI wheel

providing and fixing White Vitreous china Orissa patternW.C. pan of size 580x440 mm with integral type foot rest indian type

Providing and fixing wash basin with C.I.brackets, 15mmC.P. brass pillar taps, 32mmC.P. brass waste of standard pattern, including paintingof fitting sand brackets, cutting and making good the walls wherever require :(630x450)

providing and fixing mirror of superior glass and of required shape and size 450mmx350mm

providing and fixing PTMT towel ring trapezoidzl shape .

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply including all CPVC plain complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &coldwater supply, including all CPVC plain per direction of Engineer in Charge

providing and fixing CP brass bib cock of approved quality

providing and fixing CP brass stop cock of approved quality

providing and fixing CP brass stop shower rose of approved quality

supply and fitting 1HP submersible moter pump.with all necessary fitting all complete job.