SPECIAL REPAIR TO BLDG NO P-209 (08 QTRS) OR MD ACCN OF 23 INF DIV SIG REGT (AREN) AT DIPATOLI MIL STN UNDER GE DIPATOLI

Amount

Demolition of plain cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to a distance exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Demolition of RCC in Roofs, floors ( other than ground floors), beams, staircases, landing, chajjas and similar suspended work ( reinforced) complete all as specified , reinforced cut to facilitate demolition.

Taking down cement plaster on brick walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in plinth protection and path complete all as specified and as directed.

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in providing cement concrete in roof kerbs or mud stops, rounded or cmamfered on edges complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premices complete all as specified and as directed.

M&L for machine cut cuddapa stone slab 20 mm thick with and including over 15mm thick cement screed bed in CM (1:6), laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for coloured glazed ceramic tiles as in vertical surfaces of size (350x250)mm x7mm /(450x350) x7mm thick with and including over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:6) on fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as sprcified and as directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) mixed with liquid water proofing compound as per manufacturere's instructions, on wall, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately)

M&L rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M &L for brickwork with sub-class 'B' old size bricks, straright or corved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Taking down chowkhats or frame area n. exc 1.50 sqm each with shutters (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhats with shutters area exc 1.50 sqm but n.exc 4.0 sqm each (without taking off shutters from the frames) and removing from the site complete all as sprcified and as directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

S&F pressed steel frames for doors of size (105x60) mm made of 1.25mm thick mild steel sheet for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., cwith and including PCC(1:3:6) type B0 using 12.5 mm graded stone aggregate filling in hollow portion of frame complete all as specifid and as directed.

M&L Pressed steel frames for doors size 125x60mm made of 1.25mm thick mild steel sheet for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc., with and including PCC(1:3:6) type B0 using 12.5 mm graded stone aggregate filling in hollow portion of frame complete all as specifid and as directed.ied and fixed

M&L 35 mm thick factory made door shutters made out of 2nd Class Hard Wood (Sal) , Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with out cut and mitred beads for securing glass/gauze complete all as specified.

S&F 35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed complete all as specified.

M&L 18 mm thick Prelaminated particle board, exterior grade, type II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work including leaping all around complete all as specified.

S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube , supplying and fixing in opening as per specifications and drawings

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet beading and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as sprcified and as directed.

S&F steel ventilator with top hung shutter including box type hinges with steel handle and steel peg stays complete with glazing bars welded as per IS.1038:1983 (Amendment No.3 of May 2009) complete all as specified and as directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane complete all as specified.

S&F Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

M&L mild steel Bands, straps, supports or stays for rainwater , fan clamps Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and pintol hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

S&F Aluminium alloy handles, cast type anodised, 125mm long all as specified.

S&F stainless steel butt hinges medium weight 75mm size, cold rolled mild steel complete all as specified and directed.

S&F ordinary rat tail rod pattern, 300mm spring including roller and roller plate complete all as sprcified and as directed.

S&F floor door stoper 150mm of aluminiun alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore all as specified.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L Straight fair cutting n exc 10 cm width or girth on exposed surfaces of brick work such as in splays, chamfers, etc. including rubbed finish and waste complete all as specified.

S&F ( in repairs) Chromium plated Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified .

S&F in repair Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.

S&F in repair Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.

S&F in repair Stop valves, fancy type, cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

S&F 15 mm dia bore CP angle cock cast copper alloy , screwed down high pressure with crutch or butterfly handle , screwed both ends for iron pipe or unions complete all as specified and directed.

S&F CP soap dish Cat No. 1131 of Jaquar or equivalent of other specified Make and fixed in walls ( in repairs) complete all as specified

S&F brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed. Make:Hindware/ Prayag or equivalent as approved by the GE)

Disconnecting existing tanks, setting asidee (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc (capacity of tank exc 500 litres but not exceeding 1000 litres) complete all as specified and directed at site.

S&F in replacement Rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including 20mm dia brass float valve assembly complete all as specified and directed.

S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed.Make:Hindware/Prayag or other equilant as approved by the GE

S&F in repair for vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed. Make : Hindware/Prayag/Parryware/Cera as approved by the GE

S&F in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed. . Hindware/Prayag/Parryware/Cera as approved by the GE

S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and including 38/40mm dia waiste pipe complete all as specified and directed.

S&F plate rack of stainless steel , 1mm thick for kitchen or labotary, overall size 1200x900x250 mm ,fixed with plugs and washers on wall all as specified and directed.

S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site and complete all as specified and directed.

M&L for 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. Make:Prince/Supreme/Finolex/Kisan as approved by the GE

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) or laid in trenches complete all as specified & directed. Make:Prince/Supreme/Finolex/Kisan as approved by the GE

S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed.Make:Prince/Supreme/Finolex/Kisan as approved by the GE

S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.Make:Prince/Supreme/Finolex/Kisan as approved by the GE

S&F PVC (SWR) junction single (single T) equal or unequal 110mm bore provided with access door all as specified & directed. Make:Prince/ Supreme/ Finolex/Kisan as approved by the GE

S&F PVC (SWR) junction single (single T) equal or unequal 75mm bore provided with access door all as specified & directed. Make:Prince/ Supreme/ Finolex/Kisan as approved by the GE

S&F 110 mm bore PVC (SWR) vent cowl all as specified and directed. Make:Prince/Supreme/ Finolex/ Kisan as approved by the GE

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement all as specified and directed .Make:Prince/Supreme/Finolex/Kisan as approved by the GE

Demolition of Concrete of any description and in any position not otherwise specifically provided for Cement concrete ( unreinforced) complete all as specified.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with liquid water proofing compound as per manufacturer's instructions as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:3) mixed with liquid water proofing compound as per manufacturere's instructions, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately)

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed

M&L for polythene film black 200 micron laid in floors/Walls etc complete all as directed at site.

M&L for PCC (1:5:10) type E-2 using 40mm graded brick aggregate as in sunken portion complete all as directed at site.

M&L Cement concrete (1:3:6) TypeC-2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and directed at site

M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete,using extra cement,including forms,mitred/stopped ends etc complete all as specified and directed at site.

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in man hole cover slabs, shelves, and similar work set in CM (1:4).complete all as specified and directed.

M&L Mild steel (TMT) bar,10 mm dia and over in Reinforcement cut to length bent to shape required including cranking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed at site.

M&L TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed at site

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified.

M&L Roof treatment for non approachable roof including complete removal and cleaning of existing roof treatment (any type) :- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even.(ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.20-3.50 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) Applying a coat of aluminium paint @ 200 gm/sqm in two coats over polymeric membrene complete all as specified and directed at site.

Supply only liquid water proofing compound complete all as specified and directed at site.

M&L for preparing the new plastered surfaces of wall and applying Two coat of cement based paint after one coat of white primer complete all as specified and directed at site.

M&L for preparing the old surfaces by complete removel of existing treatment and applying two coats of cement based paint on walls after one coat of white primer complete all as specified and directed at site.

M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls after one coat of white primer complete all as specified and directed.

M&L for preparing of old surfaces by complete removel of existing treatment and applying two coats of distember oil emulsion white or tinted on walls after one coat of white primer complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on ceilling after one coat of white primer complete all as specified and directed.

M&L for preparing old plastered surfaces and applying two coats of distember oil emulsion white or tinted on ceilling after one coat of white primer complete all as specified and directed.

M/L for preparing the new surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L for applying two coats of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed.

M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed .

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil and complete all as specified and directed.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point and complete all as specified and directed.

S&F MS butt hing medium weight 100 mm size cold rolled complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing m,aterials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Taking down Old burnt /Unserviceable service cable after disconnecting of electric connection all as specified and directed at site.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper multi stranded conductor in and including Concealed PVCconduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick sheet cover of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for One light /Fan point controlled by one all as specified and directed at site.

All as per ser item No . 123 here-in-before but one 3 pin socket out let 5 Amps on the same board all as specified and directed at site.

All as per ser item No.123 here-in-before but one 3 pin socket out let 5 Amps on the Independent board all as specified and directed at site.

All as per ser item No.123 here-in-before but one bell/buzzer point controlled by one push botton on the Independent board all as specified and directed at site.

All as per ser item No.123 here-in-before but One light point controlled by two way switches with cables 1.5 Sqmm size all as specified and directed at site.

All as per Srl items No.123 here-in-before but point wiring with 2.5 Sqmm for 15 Amp socket out let with 2.5 sqmm earth continuity all as specified and directed at site.

S&F Switch Piano type single pole 5 amp 230 v complete all as specified and directed at site.

S&F Switch Piano type 2 way switch 5 amp 230 v complete all as specified and directed at site.

S&F socket outlet 2 in 1 , 5 pin, 5 amp complete all as specified and directed at site.]

S&F Switch Piano type single pole 15 amp 230 v complete all as specified and directed at site.

S&F socket outlet 2 in 1 , 6 pin,5 and 15 amp complete all as specified and directed at site.

S&F switch bell push piano type 5 amp 230 v Complete all as specified and directed at site.

S&F ceiling rose surface type all as specified and directed at site.Make : Havells Cat Part No. AHLHXCW000 or equivalent as per list of makes as approved by the GE.

S&Fixing stepped type electronic fan regulator flushType complete all as specified and directed at site.Make : Anchor Cat Part No. 14502 or equivalent as per list of makes as approved by the GE

S&F Call bell Ding-Dong AC ,230 v single pole all as specified and directed at site. Make : Anchor Cat Part No. 8363/Havells cart part No AHELEXW000 or equivalent as per list of makes as approved by the GE

M&L for Angle lamp holder (Metal Ring) all as specified and directed at site. Make : Havells Cat Part No. AHLHAMW000/Anchor cat part No 39673 or equivalent as per list of makes as approved by the GE

S&F LED tube light fitting 1x18/20 watt 230 Volt with all accessories internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site.Make : Havells Cat Part No.LHEXBYPNIN1W020 /Jaguar Cat Part No.LSRE01S020XM/Crompton Cat Part No.LDESLM-18 as approved by the GE

S&F Wall mounting light fittings suitable for E 27 Base LED Lamp complete all as specified and directed at site.Make : Havells Cat Part No. LHJE04104499 or equivalent as per list of makes as approved by the GE

Supply and fix MCB DB TPN 4 way with metal door suitable for Provision of MCCB and MCB's complete all as specified and as directed. Make : Havells Cat Part No.DHDLVDRWGOFO04/Schneider Cat Part No. NBKRENEZVDD04/ Legrand Cat Part No. 6079 13 as approved by the GE

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site. Make : Havells Cat Part No.DHDPSHODRW08/Schneider Cat Part No. NBKRENSNDD08/ Legrand Cat Part No. 6077 11 as approved by the GE

S&F MCCB 63 Amps, 415 V, 16KA 4 pole with thimbles/lugs and nut,bolts complete all as specified and as directed. Make :Havells Cat Part No.IHLGNF0063 /Legrand Cat Part No.4200 13 or equivalent in schneider as approved by the GE

S&F MCB SP 240 volt 6 to 32 Amps 'C' Series 10 KA complete all as specified and directed at site. Make : Havells Cat Part No. DHMGCSPF006-032/ Schneider Cat Part No. A9N1P06C to A9N1P32C/Legrand Cat Part No. 4085 87 to 4085 95 as approved by the GE

S&F MCB SP 40 Amps ,240 volts 'C' Series 10 KA complete all as specified and directed at site.Make : Havells Cat Part No. DHMGCSPF040/ Schneider Cat Part No. A9N1P40C/Legrand Cat Part No.4085 96 as approved by the GE

S&F MCB DP 40 Amps 240 volt 'C' series 10 KA complete all as specified and directed at site. Make : .Havells Cat Part No. DHMGCDPF040/Schneider Cat Part No. A9N2P40C/Legrand Cat Part No. 4086 37 as approved by the GE

M&L for sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed suitable size of PVC Conduit as required with 2x4.0 sq mm+1x4.0 sqmm earth wire complete all as specified and directed at site.

Taking down carefully existing electric meter box with 4 No electric meter and refixing of existing meter same position and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Supply and fix FRP meter box of size 250 x 200 x105 mm complete all as specified and directed at site.Make : Sintex Cat Part No.GSMB-2520 or equivalent in PS complete all as specified and directed at site.

M &L for GI Earthing complete with GI earth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of depth not less than 0.90x 0.60 x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth strip of size 25x3 mm, 7.5 mtr long by means of brazing nuts, bolts, check nuts, & washers ,testing of completion (drawn in earth lead protection pipe light gade GI of size 32/40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSR Part - I connected to earthing lead with Main switch/main control board,filling with charcoal dust 200 Kg, and common salt 100 KG , including necessary excavation and earth work in any type of soil ,perforated watering pipe,funnel with wire mesh,earth lead protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC Note : (i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately. (ii) Earth resistance of earth pit should be not more than 01Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm top of GI Plate.

Supply,laying in trench/on walls with new saddles & clamps etc as per site requirement),jointing,testing and commissioning with new XLPE insulated,armoured,heavy duty,PVC sheathed electric cable with aluminium conductor,1100 volts grade connecting to with new cable aluminium lug and cable glands of cross sectional area 25 sqmm 4 core all as directed at site

M&L for Sand filling in cable trenches for cable protection with clean dry sand unwashed incl gently punning complete all as specified and directed. Note :- Punned thickness shall only be considered for payment.

M&L for Bricks Sub class 'B' kiln burnt, well burnt, laid as in trenches/cable cover/protection, complete all as specified and directed at site.

Supply and laying under roads,hard surface, under culverts along poles Light grade GI pipe of 40 mm bore dia including all fittings such as elbwo,socket etcfor cable protection complete all as specified and directed at site.

S &F ceiling fan 1200mm sweep BEE 5 star rated single phase AC energy saving with Fan hook,clamp,necessary nuts,bolts,,washer and suitable length mild steel down rod duly making holes etc complete as per manufacture specification complete all as specified and directed at site.. Make : Havells Model : ES - 50 Premium/Usha Vetra Plus / Bajaj Harrier 1200 mm silky white

S&F metallic ventilating air fan single phase 300 mm sweep complete with louver shutter and incl making of hole suitable size fan base after cutting of brick/stone wall complete all as specified and directed.Make : Havells Model : Ventil Air- DB or equivalent as per list of makes

S&F in replacement LED Bldg security light fitting 25 Watt with suitable size of GI bracket fix with GI clamp in aluminium pressure die cast housing with touched glass cover ( IP 66 protection) luminaire with high power LED as light source complete all as specified and directed at site. Make : Havells/Philips/Crompton as approved by the GE.

M&L for trenchless boring under road/hard standing or any other situation by manual mean for passing GI pipe 40mm bore grade and making good both the ends complete all as specified and directed at site. Note: - Cost of GI pipe will be paid seperately.

S&F Blanking Plates for covering of MCCB DB open space complete all as specified and directed at site.Make : Havells/Legrand/Indoasian as approved by the GE

Supply and fix LED Lamps 15 w capacity suitable for batten holder complete all as specified and directed at site.Make : Havells/Philips/Crompton as approved by the GE

BUILDCON ENTERPRISES

universal enterprises

M/S ABHAY KUMAR AND BROTHERS

BHARATI ENTERPRISES

M/s R R MUKHERJEE & CO

M/s Kundu Enterprises

Nand Lal and Sons