Construction of Boys Hostel at IGNTU Campus, Makhan, Senapati District, Manipur

Amount

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the

excavated soil and disposal od surplus excavated soil as directed within a lead of 50 m (a) Hard/Dense Soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating

each deposited layer by ramming andwatering, lead upto 50 m and lift upto 1.5 m.

Filling with sandy soil under floors including watering, ramming, consolidating and dressing complete

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in

a).1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Extra for providing and mixing water proofing materials in cement concrete work in the proportion recommended by manufactures

Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per sqm on damp-proof course

after cleaning the surface with brushes and final with a piece of cloth lightly soaked in Kerosene oil.

Providing and laying in position specified grade of reinforced cement

concreete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth level

(a) 1:1:2(1 Cement : 1 k/coarse sand :2 graded stone aggregate 20 mm nominal size).

Reinforced Cement Concrete work in walls (any thickness) i/c attached pilasters, buttresses, plinth & string

courses, fillets ,Column ,pillars ,abutments ,posts and struts etc.up to floor five level excluding the cost

of centering, shuttering, finishing and reinforcement

(b).1:1.5:3 (1 Cement : 1.5k/coarse sand :3 graded stone aggregate 20 mm nominal size).Upto floor five level

Reinforced cement concrete work in suspended floors, roofs, landing,

balconies,shelves,chajjas,lintels,bands,plain windowsill,Staircases and spiral staircase

upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with

(a) 1:1.5:3 (1 Cement : 1.5 k/coarse sand :3 graded stone aggregate 20 mm nominal size

Reinforcement for R.C.C. work i/c. bending, binding and placing in position complete.

.a) Thermo-Mechanically Treated bars.

Providing form works i/c centering and shuttering so as to give a rough finish,

strutting and propping etc. height of propping and centering below supporting floor to ceiling

not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in (Using 12mm shuttering ply)

(a).Foundation, footing, bases of columns etc. and mass concrete.

(b).Sides and soffits of beams,beam haunchings,cantilevers girders,bressumers and lintel not exceeding 1 m in depth

(c ).Flat surface such as soffits of suspended floors,roofs landings and the like others floor etc.upto 200mm in thickness

(d ).Columns,pillars,posts and struts(Square,rectangular or polygon in plan)

( e).Stair cases with sloping or stepped, soffits i/c risers and stringers excluding landing

2nd class (local first class) brick work in foundation and plinth in cement mortar

1:3 (1 cement: 3 k/coarse sand) a).In Plinth

2nd class (local first class) brick work in in superstructure above plinth level

1:3 (1 cement: 3 sek/coarse sand) a).In superstructure/ Ground floor

b).First floor

c).Mumty floor

Half brick masonry 2nd class (Local first class) in cement mortar

1:3 (1 cement: 3 sek /coarse sand) in superstructure. a).Ground Floor

b).First floor

Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position.a). Local best quality Uningthou

P/F 50 mm thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws.

a).Local best quality Uningthou

Providing 40 x 3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolts nuts & wooden plugs & embedding to cement concrete block 30 x 10 x 15 cm 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal gauge).

Providing and fixing Brass sliding bolts bright finished with nuts & screws etc. complete.a)300x12mm

P/F Brass Tower bolts(Barrel type) with screws etc, complete.a)250x10

Providing & fixing Brass handles with necessary screws etc. complete. a)125 mm

Providing & fixing bright finished brass hand drawn hooks and eyes..(a)150mm

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position.a).Uchan/Tairen/Tolhao/Khangra.

Corrugated G.I. sheet walling 24 B.G. i/c fitting and fixing to wooden frames with necessary screws and nails complete (frame work to be paid separately).

Supply & installation of stainless steel railing (Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stinless steel nuts and bolts complete, i/c fixing the railing with necessary accessoties

& stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge

Providing & fixing in position collapsible steel shutters with vertical channels 20mm X 10 mm X 2 mm & braced with flat iron diagonals 20 mm X 5 mm sizes with top & bottom rails of T

iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pulleys complete with bolts & nuts, locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

Marble stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1cement: 6 coarse sand)

laid and jointed with grey cement slurry including rubbing and polishing complete with -

(a).White Marble slab 20 mm thick. a).60x60cm

10 mm thick marble tiles in risers of steps , skirting , dado walls and pillars laid on 10 mm thick base of cement

mortar 1 : 3 ( 1 cement: 3 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete

Extra for nosing in marble stone for treads

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to

IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), including grouting the joints with white cement and matching pigments etc., complete. a).Size of Tile -600 x600mm.(Double Charged)-Branded

Providing and laying Vitrified tiles in different sizes (thickness to be speciied by manufacturer ) ,with water absorption less than 0.08% and conforming to IS :15622 of approved brand & manufacturer ,in all colours and shade in skirting ,riser of steps,over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 sekmai coarse sand), including grouting the joint with white cement & matching pigments etc.a).Size of Tile -600 x600mm.(Double Charged)-Branded

Providing and fixing 1st quality ceramic glazed wall tiles(colour) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

12 mm cement plaster 1:3 (1 cement:3 fine sand).

15 mm cement plaster 1:3 (1 cement:3Fine sand).

15 mm cement plaster 1:3 (1 cement:3fine sand) finished with a floating coat of neat cement.

Distempering (two or more coats) with oil bound washable distemper of

approved quality on new work I/c priming coat to give an even shade.

Finishing walls with weather shield paint of approved quality on new work (three or more coats) to give an even shade.

Applying one coat of cement primer of approved quality on wall surface.

Providing and applying plaster of paris of 2mm thickness over plastered surface to prepare the surafce even and smooth complete.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Applying ready mixed priming coat ( Red lead primer of approved quality ) on steel work..

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved quality in all shades on new work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved quality all shades except black or chocolate on steel on new work to give an even shade.

Sh: Land Development

Excavation in hill Area in soil by mechanical means including cutting and treming of sides slops and disposing of excavated earth with all lift and lead upto 50 m.

Chandam Arunkumar Singh