Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance 0 BELCHAURA MAUNATH BHANJAN MAU MAU UTTAR PRADESH 275101 | MAU | MAU | UTTAR PRADESH | 275101 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
22 Sept 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Manager
Office of the Project Manager, Unit-43, C and DS, UP Jal Nigam (U), Kannauj
As per NIT and Bid Document
2023_UPCDS_838378_1
930/E-Nivida/110 Dated 06.09.2023
Open Tender
Supply of Materials
Item Rate
30 days
D.M. CAMP OFFICE FATEHGARH DISTT. FARRUKHABAD
As per NIT and Bid Document
3 documents required · 3 mandatory
₹5,900
As per NIT and Bid Document
₹1 L
22 Sept 2023
15 Sept 2023
22 Sept 2023
15 Sept 2023
22 Sept 2023
15 Sept 2023
Amount
Supply of Director Desk
Supply of High Back Chair (Executive)
Supply of Visitor Chairs
Supply of General Visitor Chairs
Supply & Fixing of TV Cabinate Modular
Supply of OLED Android TV 55 Inch
Installation charges for TV etc
Supply & Installation of split Direct Expansion Air Conditioners suitable for operation on A/C Supply single phase 50 Hz 230V with hermetically sealed compressor with air cooled condenser with DC inverter technology, motor capacitor and start run capacitors,elay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room in the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube, suitable capacity 3 core sheated / PVC copper cable and a battery operated wireless remote unit. 1.5 TR BEE Star Rated : 4 Star EER 3.2
Supply of Stabilizer 4KVA For AC
PA System
Mike For Desk
Two handheld microphone with receiver unit
Central Mixer Amplifier
Wall mounted Speakers
Installation Charges
Finishing walls with two coat of Exterior emulsion paint (Apex) of best quality including supply of all materials, labour and tool sand plants etc. required for proper completion of the work.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangen of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
M/S NARENDRA SINGH YADAV THEKEDAR
M/S OM CONSTRUCTION
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .