Certain repair to wooden furniture and recanning of all type chairs at Bikaner Mil Stn under GE (N) Bikaner

Amount

Table 3’ x 3 ‘ (900 x 900 x760 mm) FD-291 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. (a) Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 900 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.

Side frame rail as specifid in drawing.

Legs square & round type as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs complete all as specified.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table 3’ x 2 ‘ (900 x 600 x760 mm) with drawer and without drawer FD-283 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 900 x 600 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.

Long rail as specifid in drawing.

Short rail as specifid in drawing.

Legs square & round type as specifid in drawing.

Short/long stiffeners as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs as specifid in drawing.

Drawers complete as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Centre (900 x 450 mm) FD-274 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 900 x 450 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round as specifid in drawing.

Front and back rail as specifid in drawing.

Short rail as specifid in drawing

Legs square & round type as specifid in drawing.

Short/long stiffeners as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Peg (450 x 300 mm) FD-277 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 450 x 300 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round.

Front and back rail as specifid in drawing.

Short rail as specifid in drawing.

Legs square & round type as specifid in drawing.

Short/long stiffeners as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Dinging 06 persons (1500 x 900 mm) FD-273 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 1500 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round as specifid in drawing.

Front and back rail as specifid in drawing.

Short rail as specifid in drawing.

Legs square & round type as specifid in drawing.

Top centre stiffeners size of 100 x 25mm as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs short rail to legs as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Dinging 08 persons (1800 x 900 mm) FD-273 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 1800 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round as specifid in drawing.

Front and back rail as specifid in drawing.

Short rail as specifid in drawing.

Legs square & round type as specifid in drawing.

Top centre stiffeners size of 100 x 25mm as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs short rail to legs as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Teapoy Wooden (600 x 450mm) FD-278 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 600 x 450 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round as specifid in drawing.

Front and back rail as specifid in drawing.

Short / side rail as specifid in drawing.

Legs square & round type as specifid in drawing.

Short/long stiffeners as specifid in drawing.

S&F second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Dressing Gents FD-378 Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Replacement of old unserviceable top or bottom and fabricated out of pre-laminated particle board with teak veneers both side 18 mm thick fixed to timber frame work with screws complete all as shown on drawings.

Replacement of old unserviceable side rail fabricated out of pre-laminated particle board with teak veneers both side size of 18 mm thick fixed to frame work with screws complete all as shown on drawings.

Replacement of old unserviceable plywood, 4 mm thick, commercial on back side of the table complete all as shown on drawings.

Aluminum anodized knob 25 mm of best quality as specifid in drawing.

Replacement of old unserviceable looking mirror 5.0 mm thick fixed to the frame of table dressing gents complete all as shown on drawings.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Bed Hard Ply top FD-247, 246 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of bed complete all as specified ans shwon on drg. Top ply 12mm thick of size bed hard complete 1950 x 900 mm. (BWR) as per IS-303 (07 ply) of commercial general purpose

Long rail of shisham wood of size 100mm x 50mm x 1980mm as specifid in drawing.

Fixing only shor rail after cutting to required length from old retrieved long rail as specifid in drawing.

Ply wood 3mm thick teak faced to the direct vision of head rest and ply wood commercial 3 mm thick to other side including 4mm thick shisham wood edging all around.

All as per serial item No. 58.00 here-in-before but to foot rest as specifid in drawing.

Leg to head rest sdie of bed of required and size as specifid in drawing.

Leg to foot rest side of bed as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Bin Soiled Linen FD-244 Supply and fixing the following new parts after removing broken parts including tightening with screw other members and all as specified and shwon on drg. Removing old unserviceable cane of both side of bin solid linen and supply and fixing aluminium X PM Jali fixed to the existing frame with shisham wood beading all around.

Leg and runner as specifid in drawing.

MS Chromium plated piano type hinges 75mm wide as specifid in drawing.

Back side of bin solid linen with 12mm thick commercial ply wood as specifid in drawing.

Top & Front of bin shall be fixed with ply wood 6 nn thick teak veneer face as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Side Board FD-26(M), 241 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the side board complete and all as specified and shwon on drg. Shutter made out of prelaminated particle board exterior grade size of 220mm x 435mm x 18mm thick including 4 mm thick shisham wood beading all around fixed with continuous piano type hinge 40mm wide.

Drawers made out of prelaminated teak faced pre laminated particle board shown on drg.

Aluminium anodized knob 25mm of best quality as specifid in drawing.

Top of side board made out of pre laminated particle board of 18mm as specifid in drawing.

Sides of side board made out prelaminated particle board of 18mm as specifid in drawing.

Front and rear leg including long and side rail frame fabricated out of shisham wood all as per shown on drg.

Plywood 4mm thick commercial on back side of the side baord as specifid in drawing.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table writing FD-249 & FD-275 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table writing complete and all as specified and shwon on drg. Top of table made out of prelaminated particle board 18mm thick 1145 x 600 mm with 4 mm thick shisham wood beading all around.

Cabinet of table as specifid in drawing.

Drawers of table as specifid in drawing.

Shutter of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board including piano type hinges 40mm wide.

Leg of table of 1st class shisam wood size of 45 x 45 x 750mm as specifid in drawing.

Foot rest of table of 1st class shisam wood size of 50 x 25 x 1025mm as specifid in drawing.

Aluminium anodized knob 25mm of best quality as specifid in drawing.

Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shwion on drg.

S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Table Bed side FD-276 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table bed side complete and all as specified and shwon on drg. 18mm thick pre-laminated particle board side runner including legs of table with 4mm thick teak wood beading all around.

18mm thick pre-laminated particle board top side of the table made out of teak faced with 4mm thick teak wood beading all around as specifid in drawing.

18mm thick pre-laminated particle board top / sheleve & bottom sheleve self of the table made out of teak faced as specifid in drawing.

Plywood 4mm thick commercial on back side of the table bed side as specifid in drawing.

Chair wooden bottom FD-275 & FD-285 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair wooden bottom complete and all as specified and shwon on drg. Rear leg of size as shown on drg.

Front leg of size as Shown on drg

Front rail of size as Shown on drg

Back rest of size as Shown on drg

Side rail of size as Shown on drg

Back rail of size as Shown on drg

Stiffener (one large piece and two small piece) of size as Shown on drg

Seat of 18mm thick prelaminated particle board of exterior grade

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Hat stand with mirror FD-352 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the Hat stand with mirror complete and all as specified and shwon on drg. Old unserviceable mirror with new mirror 5.0 mm thick as specifid in drawing.

Aluminium hook all as specified in drawings

Edging all as specified in drawings

Back made out of 6mm ISI maked. Plywood commercial all as specified in drawings.

Polishing all new and old surfaces with two coats of French polish all as specified in drawings

Notice board FD-99 & FD-117 Removing the old u/s soft bd, baize green and wooden frame of notice bd and S&F the new baize green and soft bd, frame and finishing of wooden surfaces with french polish complete and of the following size. Notice boad of size 1830 mm x 1220 mm all as specified in drawings

Notice boad of size 2400 mm x 1200 mm all as specified in drawings

Notice boad of size 900 mm x 600 mm all as specified in drawings

Notice boad of size 1500 mm x 900 mm all as specified in drawings

All as per serial item No 109.00 here-in-before but of size 2400 mm x 1200 mm all as specified in drawings

All as per serial item No 109.00 here-in-before but of size 900 mm x 600 mm all as specified in drawings

All as per serial item No 109.00 here-in-before but of size 1500 mm x 900 mm all as specified in drawings

Bin soiled linen multi purpose FD/E6/MAP/09 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the Bin solid multi purpose complete and all as specified and shwon on drawings. 18mm thick pre-laminated particle board top existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.

18mm thick pre-laminated particle board bottom existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.

18mm thick pre-laminated particle board side existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.

18mm thick pre-laminated particle board drawers existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.

18mm thick pre-laminated particle board shutter existing bin soiled linen multi purpose shape and size shown on drawing including 4mm thick teak wood beading all around.

Chromium plated handle fency type 100mm as per sample all as specified in drawings

Plywood 6mm thick commercial on back side of the Bin soiled linen multi purpose including legs frame all as specified in drawings

Table Dinging (1200 x 900 mm) FD/MAP-II/03 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face one side and other side white of size 1200 x 900 x 18mm thick with 04 mm thick half raound teak wood beading shall be provided all round all as specified in drawings

Front and back rail all as specified in drawings

Short/side rail all as specified in drawings

Legs square type all as specified in drawings

S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs all as specified in drawings

French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

RECANNING OF CHAIRS, CHAIR DINING FD-279 Removing of old unserviceable plastic cane from all sorts of chairs i.e chair dining, chair writing, chair easy , stool dressing CB etc (except chair verandah) including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and back and 2 mm wide and 0.40 mm thick half round for remaining portion, complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 126.00 here-in -before but Chair Writing FD-280

All as per serial item No 126.00 here-in -before but Chair Easy FD-229

All as per serial item No 126.00 here-in -before but Stool dressing CB FD-282

RECANNING CHAIR VARANDAH FD-359 & FD-256 : Removing of old unserviceable cane plastic from chair verandah, painting with one coat of synthetic enamel paint (White) after preparation of old painted surfaces, including recanning with new cane of white colour of size 4 mm wide and 0.60 mm thick for seat and back, closely woven as per mat pattern all as shown on drawing and also including providing new rubber shoes at the bottom of legs after removing of old shoes complete all as specified and as directed by Engineer-in-Change.

Painting steel and iron surfaces of the chair complete by spray painting synthetic enamel paint of white shade including preparation of steel and iron surfaces (Priming with red oxide primer shall be done wherever welding is carried out for the broken joints and also replacemnt of old unservicable required parts and filler coat applies). The cost of welding & required pipe shall be deemed to be included in the quoted rates of this items.

Supply and fixing 04 Nos hard rubber shoes to each chair verandah as per drawings.

Chair Dianing FD-279 : Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. (a) Rear leg of size as Shown on drg

Front leg of size as Shown on drg

Front rail of size as Shown on drg

Back rest of size as Shown on drg

Side rail of size as Shown on drg

Back rail rail of size as Shown on drg

Stiffener (one large piece and two small piece) of size as Shown on drg

Tightening of all part of chair dining & French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair Writing FD-280 : Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. Rear leg of size as Shown on drg

Front leg of size as Shown on drg

Arms of size as Shown on drg

Stiffener (one large piece and two small piece) of size as Shown on drg

Back and side rail of size as Shown on drg

Back rest of size as Shown on drg

Front rail of size as Shown on drg

Tightening of all part of chair writing & French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Chair easy FD-229 : Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the chair easy complete and all as specified and shwon on drg. Front leg round and square type.

Rear leg of sizeas shown on drg

Front seat rail of size as shown on drg

Back seat rail of size as shown on drg

Side frame rail of size as shown on drg

Front rail of size as shown on drg

Rear frame of rail of size as shown on drg

Back frame rail of size as shown on drg

Arms of size as shown on drg

Tightening of all part of chair easy and French polishing on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Stool dressing CB/Cushioned. FD-282 Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening with screw and other members of the Stool dressing CB/Cushioned complete all as specified and shwon on drg. Legs complete all as specified and shwon on drg

Side Rail complete all as specified and shwon on drg

Stiffener complete all as specified and shwon on drg

Cushioned of stood dressing with new tapestry closth or rexine as per sample approved by GE & as directed by Engr-in-Charge.

Tightening of all part of stool and Polishing all new and old surfaces with two coats of French polish and directed by Eng -in-charge.

Table Dressing Ladies FD-379 : Replacement of unserviceable looking mirror table dressing ladies 5.0 mm thick fixed to the frame complete all as shown on drawings.

Replacement of unserviceable sheet glass of shutter size 280 X 265 mm including sliding wheel complete as shown on drawings.

Replacement of old unserviceable plywood, 12mm thick, commercial on back side of the table complete all as shown on drawings.

Replacement of old unserviceable ply wood 4mm thick back side of the mirror complete all as shown on drawings.

Supply and fix new knobs shall be anodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter of Cup Board as shown on drawings.

Replacement of old unserviceable top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18 / 19 mm thick fixed to timber framework with screws complete all as shown on drawings.

Replacement of old unserviceable drawer of best quality all as per drawing and specified.

French polishing of table dressing (except pre-laminated particle board and plywood surfaces) complete all as specified.

M/S CHANDER SHEKHAR

SMS Enterprises

PRAFUL ENTERPRISES

GUPTA AND ENGINEERS