REPAIR TO INTERNAL ELECTRIFICATION INCLUDING FANS GEYSER AND REWIRING TO CERTAIN BLDG REPLACEMENT OF LED FITTINGS CONTROL DBS AND CONNECTED ITEMS IN 3 TTR DCP POCKET MT COY ETC 5 TTR SRI AND MDC AT BAMBOLIM UNDER GE PANAJI GOA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site all as specified and as directed.

Taking down UNSV sub main wiring of any size make, type and capacity and depositing at site all as specified and as directed.

Material and Labour Point wiring complete with PVC insulated , FRLS, unsheathed, flexible, bright anneled cable 1100 V grade conforming to IS-694 1.5 Sq mm (nominal area) mult-stranded cable with copper conductor drawn through and including heavy grade non metallic rigid PVC casing caping of suitable size (ISI marked) and accessories fixed to walls/ floors/ ceilings / roofs etc. with sunken type pressed steel/ welded MS terminal boxes factory made out of 16 gauge, MS sheet with hold fasts, 3mm thick laminated sheet top cover for mounting of fittings switches, socket outlets, regulators etc. fixed flush with wall including provision of PVC insulated FRLS, unsheathed 1100 Volts grade, 1.50 Sqmm multistranded copper earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:-

(a) One light point / Fan point ,Bell point controlled by one, one-way switch,

(b) One switch socket outlet 3 pin 5 Amps, on Same board.

(c) One switch socket outlet 2/3 pin 5 Amps, on Independent board.

All as per item No 4 but one light point controlled by two way switches

All as per item No 4 above but with 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

Supply & Fix Switch piano, flush type, 5Amps, single pole, one way. Make: SSK Anchor/ Havell's,

Supply & Fix Switch Socket combination piano, flush type, 15 Amps, singel pole, one way. SSK/Anchor/ Havell's

Supply & Fix Switch Socket combination piano, flush type, 5 Amps, singel pole, one way. SSK/Anchor/ Havell's,

Supply & Fix switch piano flush type single pole two way 5 Amp 240 Volts. - Make:- SSK/Anchor/ Havell's

Supply & Fix Ceiling rose surface bakelite 65x50mm two to three terminal Make : SSK/Havells/Plaza.

Material and Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply & Fix Bell switch including bell Ding Dong One way ,240 Volts AC ISI Marked

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan all as specified and directed. Make - SSK/Anchor/ Havell's

Supply & Fix LED Batten Tube Light light fittings 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed.Bajaj Cat part No BCLSB 20 WH or equivalent in CG,Havells

Supply & Fix LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed.Bajaj Cat part No BCLSB 10 WH or equivalent in CG,Havells

Supply & Fix IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed.

Supply & Fix IP-42 protection distribution board, TPN 4 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed.

Supply and Fixing Isolator TPN 415 Volt 63 Amps all as specified and as directed

Supply and Fixing Isolator SPN 6 to 40 Amps, 240 Volts all as specified and as directed.

Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps all as specified and as directed.

Supply & Fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and as directed.

Material and Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 6.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note:- (a) Two runs of 6 Sqmm single core copper cables and One run of 6.0 Sqmm earth conductor cable with casing capping/conduit will be measured and paid as one unit length.

Material and Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 4 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 4.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 4 Sqmm single core copper cables and One run of earth conductor cable of 4.0 with casing capping/conduit will be measured and paid as one unit length.

Material and Labour for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991) all as specified and directed by Engr-in-Charge. Note:- RCC pit cover shall be precast of RCC 1:2:4, type B-1 80 mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of cast iron cover.

Dismantling of existing Fan from site and Refixing of ceiling fan/exhaust fan suitable for 1200/1400 mm sweep of aproved size suitable for hanging as directed by Engr -in-Charge.

Material and Labour in Repair of U/S electric fan (Any make, type & sweep) with US winding, US Bearing ,Capacitor ,canopy ,Flexible wire as required to make electric for functioning including oiling and Greasing of fan and testing of fan complete all as specified and as directed by Engineer-In-Charge (Old material will be property of contractor) for the following :-

Ceiling fan (any make, type & sweep)

Exhaust fan (any make, type & sweep)

Material and Labour for removing of fans from Site and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed by Engr-in-Charge.

All as per item No 28 Above But Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed by Engr-in-Charge.

Supply and fix 35W LED street light fitting, new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prisma as tic polycarbonate modular secondary lense optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV in build surge protection of capacity LED including all accessories complete all as specified and as directed.Havells or equivalent in Make: /Phillips

Supply and fix PVC connection pipes with brass ferrule heavy duty for hot and cold water applications fixed from electric geyser to water supply pipes including necessary GI fittings required at site complete all as specified and directed. Note: each set contains 1 No hot water pipe and 1 No cold water pipe.

Supply and fix 15mm bore galvanised iron steel water tubing of medium grade with and including all fittings including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. Make: Tata/ Jindal/ Zenith.

Supply and fix 15mm dia cast copper alloy, bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore of pipe complete all as specified and directed. Make: Neta/ Zoloto/ Jaypee.

Supply and fix 15mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15mm dia and fixed complete all as specified and directed. Make: Leader/ Zoloto/ Bir/ Kartar/ Kirloskar.

Supply & Fix LED Batten Tube Light light fittings 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed.Bajaj Cat part No BCLSB 20 WH or equivalent in CG,Havells

Supply & Fix Switch Socket combination Box Type with switch, 15 Amps, singel pole, one way. SSK/Anchor/ Havell's

Supply & Fix Switch Socket Box type with combination piano, 5 Amps, singel pole, one way. SSK/Anchor/ Havell's,

Material and Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 4x4 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 4x7 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 6x8 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 8x10 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan all as specified and directed. Make - SSK/Anchor/ Havell's

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 4x4 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 4x7 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 6x8 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply & Fix PVC rectangular box for mounting, switches, sockets, fan regulator etc. of sizes 8x10 inch thick plastic PVC Board laminated sheet cover complete all as specified and as directed.

Supply and fix in replacement of thermostat switch 240 volts AC suitable for geysers of any make/model and capacity (ISI Marked) and fixed complete all as directed.

Supply and fix in replacement of heating element of 1500 watt for geysers including nuts, bolts, gasket etc complete,

industrial suppliers