SRRD vemulawada

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m, including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc., including cost and conveyance of all material and labour charges, contractors profit & over heads etc., but excluding seigniorage charges & taxes like GST etc. , complete. (APDSS NO.308)

Supply and filling of Stone Dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. including cost and conveyance of all materials and labour charges, and contractors profit & over heads but excluding seigniorage charges & taxes like GST etc. , complete. (APDSS NO. 309 & 310)

Supply and laying of Ply sheet 125 Micron Including labour charges etc.,complete.

Plain Cement concrete (M 20) Nominal Mix using 20mm graded metal using concrete mixer - using 20mm HG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., including all operational, incidental and labour charges such as, machine mixing, laying concrete , curing, including contractor's profit and over head charges etc., complete but excluding seigniorage charges & taxes like GST etc. (APSS 402)

Supply of expansion joint filler board confirming to IS:1838 for buildings, columns, beams and slabs 50mm thick

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms as per Table - I of IS:1077-1992 Non-Modular or traditional size 23x11x7cm, having compressive strength not less than 35kg/cm2, including cost & conveyance of all materials and labour charges, centering & scafolding charges, constructing masnory, lift charges, curing, overhead charges & Contractors profit etc., complete. But excluding seignorage chages and taxes like GST. (APSS No.501 & 504) for Super structure

Plastering with CM (1:5), 12 mm thick - single coat dubara sponge finish including cost and conveyance of all materials and labour charges, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, over heads & contractor profit, but excluding seignorage charges and taxes like GST, etc., complete for for finished item of work. (APSS 901 & 903) for uneven surface/outer surface

Plastering to brick masonry wall with 20mm thick single coat in CM (1:5) with dubara sponge finish including cost and conveyance of all materials and labour charges, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, over heads & contractor profit, but excluding seignorage charges and taxes like GST, etc., complete for for finished item of work. (APSS 901 & 903 ) for uneven surface / outer Walls.

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin). Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. (Sl.No.702 P.No.153)

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. (Sl.No.970 P.No.178)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. (S.No.1 P.No.623) Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice (S.No.646 P.No.281)

Painting to new walls with 2 coats of plastic emulsion/ Acrylic emulsion paint interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 (making three coats) on New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., but excluding taxes like GST etc, complete for finished item of work as per SS 911 for internal walls

Hire Charges towards Hydraulic Truck Crane 16T including labour charges, fuel charges and driver batha (Sl.No.69 P.No.15)

Spply and placing VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, steel centering & steel shuttering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, centering, shuttering, and also excluding seigniorage charges and taxes like GST etc. (APSS 403) SLAB 200MM THICK

Providing HYSD / TMT steel bars (Fe 415/ Fe 500 / Fe550 Grade as per IS 1786 to 1979) of different diameters for RCC works, including labour charges for straitening, cutting, bending to required sizes and shapes, placing in positions with cover blocks of approved materials and size and tying and lapse splicings with binding wire of 18 guage forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as over lapse, coupling, chairs, spacer bars, including cost and conveyance of binding wires, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding taxes like GST on all materials etc., complete foer finished item of work in all floors (APDSS No.126). For bars < 36mm dia for reinforcement (APDSS No.126)

Dismantling of BrickMasonry in Cement morter Including labour charges etc.,complete.

Supply, fabricating and fixing Iron grill in position using MS tubes & pipes, flats as per IS 1161 including cost & conveyance of materials to site, fabrication, labour charges for fixing etc., in position complete, excluding taxes like GST etc.

Carting of dubrice from site to outskirts of village up to 2.00Km including loading and unloading charges etc.,complete.

Painting to Synthetic Enamel paint to New Iron works 2 coats over primary coat total 3 coats with using 1st grade paint including cost and conveyance of all materials and labour charges etc., complete for finished item of work.