Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.2 Craccepted-aoc | ₹4.2 Cr | accepted-aoc |
Tender Value
₹4.0 Cr
EMD Value
₹6.0 L
Closing Date
9 Apr 2026, 9:30 pmClosed
Bengaluru Water Supply And Sewerage Board
sowbhagya
The Work of Construction of 4MLD ISPS at Hemmigepura near V valley, Bangalore- 2nd call
BWSSB/2025-26/WT/WORK_INDENT3312
BWSSB/2025-26/WT/WORK_INDENT3312
Open
Water /sewage treatment tanks
Two Tender Document System(Two Cover)
BWSSB Chief Engineer Project Bengaluru
7 documents required · 7 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
As prime contractor should have satisfactorily completed at least one similar work of complete Design, Procurement, Supply, Installation, Construction, and Testing of all Civil, Mechanical, Electrical, and Instrumentation Works- ISPS of value not less than Rs. 235.26 lakh in last Five (5) Years as on date of bid submission
Executed in any one year the following minimum quantities of work (a)RCC of M 30 with shuttering-352cum(b)Earth work Excavation-2480 Cum(c) Reinforcement TMT bars-51T
The contractor should have successfully executed and completed Design, Procurement, Supply, Installation, Construction, Testing and Commissioning of all Civil, Mechanical, Electrical, and Instrumentation Works of Minimum 3MLD-ISPS in last Five (5) Years as on date of bid submission
Equipment Capacity
Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 941.05 lakh
Liquid assets and /or availability of credit facilities of no less than Rs. 118 Lakh (Credit lines/letter of credit/certificates from Nationalized / Schedule banks in India for meeting the fund requirement etc.,
Assessed Available tender capacity(AxNx1.5)-B
₹5,000
₹6.0 L
9 Apr 2026
12 Mar 2026
10 Apr 2026
23 Mar 2026
23 Mar 2026
The Work of Construction of 4MLD ISPS at Hemmigepura near V valley, Bangalore- 2nd call
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Disposing off the excess excavated earth of all types upto a distance mentioned below by vehicle inluding loading, unloading, with all lifts, labour, HOM of machinery etc., completecomplete.
Providing and laying in position plain cement concrete of design mix M10 with OPC minimum cement content at 240Kgs using 40 mm and down size graded granite metal course aggregates and the fine agregat...
Providing and laying in position Reinforced cement concrete of design mix M25 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Reinforced cement concrete of design mix M 25 for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto ...
Providing and laying in position Reinforced cement concrete of design mix M30 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in Reinforced cement concrete of design mix M30 for all Basement & surface level works, return walls, retaining walls, sunken floorsetc. The granite/trap/basalt crushed graded coa...
Providing and laying in position Reinforced cement concrete of design mix M30 for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Form work- Earth retaining Structures-Base slab
Form work for Earth retaining Structures-walls
Form work for Earth retaining Structures-Slab & walkway
Form work for wetwell
Form work for Isolated foundations
Form work for Plinth beams
Form work for RCC Beams & Lintels & RCC walls above the ground/drain walls
Form work for columns
Form work for chejjas
Form work for Roof
Providing CRS bars of Fe500 grade steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, including bin...
Providing CRS bars of Fe500 grade steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and /or welding wherever required, including bind...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing plastering 20 mm thick cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing sc...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing and finishing external walls in two coats with waterproof cement paint of required shade :New work (Two coats applied at 4.84 kg/10 m²) to give an even shade after thoroughly brooming the s...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Supply, delivery, transportation, fabrication and erection of all kinds structural steel welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a primi...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
Extra for providing mechanical device chain and crank operation for operating rolling shutters: area including cost of materials, labour, usage charges of machinery complete as per specifications and ...
Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as pe...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
STP (inside) waterproofing with Anticorrosive and Protective Coating. Providing and Applying two component coal tar epoxy-based coating on inside surface of Sewage and Effluent treatment tank at 0.30...
All buildings shall be Damp proof course(DPC) 50mm thick PCC nominal mix with 20 mm downgraded aggregate with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources :...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Stainless Steel 304 confirming to ASTM A-240M. Height of railing not less than 1200 mm. Stainless steel handrails of 10S pipe for ramps, staircases, walkway, chambers and Channels etc. are made out of...
Puddle pipe fixing in position and to the level as per drawings and necessary arrangements for all size of pipes
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Kannada Sign Boards
Providing, fixing, applying of contraction joint with suitable type PVC water stopper of 230 mm width and 5 mm thick sealed with 12 mm x 25 mm gun grade polysulphide elastomeric joint sealant of FOSR...
Supplying and fixing PVC encapsulated CI rungs to shapes and at locations specified in drawings and specifications for Valve chambers
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Tiles for walkway Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all ...
Sinking of 7m external diameter well (Other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete and technical spe...
clayey soil beyound 3m (Rate of sinking = 0.17 m/hr)
Hard rock-rock bouldery strata
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out...
Providing and laying Cutting edge of Mild steel for well foundation complete as per drawing and technical specification complete as per specifications
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/
basalt crushed graded coarse aggregates and fine agg...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Supplying and fixing M.S rectangular poles made out of 2 equal angles of 50x50x5 mm welded together and fixed in CC (1:2:4) with 2 nos 16mm dia MS hold fast rods each of length 25cms including cost o...
Supplying and fixing turn buckles and straining bolts for barbed wire fencing.
2 inch pipe-schedule40 (OD 60.3mm)at5.44 kg/m (top & bottom pipe for 10m)
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Providing and constructing precast concrete solid blocks Providing Solid Concrete Bricks of size 225x100x75mm having strength 5Mpa & above for superstructure above plinth level in all shapes and sizes...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Supply, Installation,Testing of Manually operated with option of operating of portable actuator Sluice Gate confirming to IS 13349 Part-I for isolation purpose MOC:Wall Thimble,Frame and slide:CI IS 2...
Supply, Installation,Testing of Manually operated with option of operating of portable actuator weir Gate confirming to IS 13349 Part-I for isolation purpose MOC:Wall Thimble,Frame and slide:CI IS 210...
Supply,fabrication,Installation,testing of Mechanically operated Multi raked Coarse bar screen With auto jam removal system of SS 316L at inlet of TSPSof size mentioned below, with 20 mm bar spacing ...
Supply,Installation of Belt conveyor system (MOC of Belt: 3 ply Nylon) Minmum 600 mm width with 2200 m
Supply of Portable Screening Container of MS Galvanised of 2 m3 capacity with four wheels of each 20 cm dia,max height shall be 66 cm including wheels, 12 gauge steel side plates with 5 mm thk plate a...
Supply, Installation,Testing of Portable Actuator for the operation of Sluice gates and Weir gate
Supply,fabrication,Installation,testing of J Type SS 316 removable Manual Coarse Bar Screen of size consisting of vertical rectangular Flats/ Bars of size 50 mm Wide & 10 mm Thick, vertically spaced ...
Supply, Installation,Testing of Electrically operated Hoist with necesssary I-girder arrangement with slings and Deschakles 2.0 Ton Capacity
Supply, Installation,Testing of Manually operated with option of operating of portable actuator Sluice Gate confirming to IS 13349 Part-I for isolation purpose MOC:Wall Thimble,Frame and slide:CI IS 2...
Supply, delivery at site, erection, testing and commissioning of brand new, best efficient, Non-clog Submersible Sewage handling Pump of of capacity & Head as mentioned below & motor shall be 415V, 50...
Supply,installation,testing of non-rising spindle dia. Motorised operated Knife Gate Valve PN 10 confirming to AWWA C 520-10 MOC: Body: BS 2789 Gr.420/12 Knife Gate: SS ASTM A 240 type 304, Shaft: SS...
Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Do...
Supply,installation,testing of non-rising spindle, Motorised operated Knife Gate Valve PN 10 confirming to AWWA C 520-10 MOC: Body: Ductile Iron BS 2789 Gr.420/12 Knife Gate: SS ASTM A 240 type 304, ...
Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Do...
supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, ...
Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865...
Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, ...
Supply, Installation,Testing of Electrically operated Hoist of Tonnage as mentioned below with necesssary I-girder arrangement long traverse & approx. lift with slings and Deschakles 2 Ton
Providing, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining (CML) with Portland Slag Cement as per IS 455:1989 and Metallic Zinc Coating as per annexure...
Providing, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining (CML) with Portland Slag Cement as per IS 455:1989 and Metallic Zinc Coating as per annexure...
Providing and fixing of DI specials with ISI mark confoming to IS 9523 / 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with rust prevention coatings as below: NOTE: A) External coati...
Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Providing, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining (CML) with Portland Slag Cement as per IS 455:1989 and Metallic Zinc Coating as per annexure...
Supply, Installation,Testing & Commissioning of Dewatering Pump Submersible cable of 50 M length with necessary Pump Monitoring Unit. The pump shall have double mechanical seals to prevent ingress of ...
Supply,installation,testing of non-rising spindle 100 mm dia Manually operated Knife valve gate PN 10 confirming to AWWA C 520-10 MOC: Body: Ductile Iron IS 1865 Gr. 500/7 Knife Gate: SS ASTM A 240 t...
Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Do...
Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Providing and fixing of DI specials with ISI mark confoming to IS 9523 / 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with rust prevention coatings as below: NOTE: A) External coati...
Design, fabrication, supply, erection and commissioning of structural steel hoist bridge consisting of columns, beams, bracings, stiffeners, ties, chequered plate covering, hand railing, ladder etc., ...
Supply of 18" (450mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with ISI Mark. Makes: As per list of recommended brands.
Online Field Instruments:Supply,Installation,Testing & Commissioning (SITC) of Instrumentation to be installed at ISPS comprising of the following components on a minimum:Full Bore Electro-Magnetic Fl...
Level Measurement with all required accessories inclusive of transmitters,etc as per bid specifications: Differential Level Across Inlet and Outlet side of the ...
Level Measurement with all required accessories inclusive of transmitters,etc as per bid specifications: Level Measurement at Wet-well
Level Switches inclusive of transmitters, etc as per bid specifications: Wet-well at ISPS
Pressure Indicating Transmitters (PIT) with required manifold, and all other required accessories: ISPS Common Discharge Pressure (PIT)
Pressure Gauges with required manifold, and all other required accessories: Pressure Gauges (Diaphragm seal) along with accessories (Including Pipe Fittings etc)
Supply,Installation,Testing & Commissioning (SITC) of Control & Automation system to be installed at ISPS comprising of the following components on a minimum: ...
Mandatory Spares to be considered for the control system on a minimum during commissioning- Central Processing Unit(CPU)
Digital Input Module (1 no. of 16-channel for each pumping station)
Digital output Module (1 no. of 16-channel for each pumping station)
Analog Input Module (1 no. of 8-channel for each pumping station)
Analog Output Module (1 no. of 4-channel for each pumping station)
6-port industrial Grade Managed Ethernet Switches
Supply installation Testing and commissioning of 6 KVA on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1: 2008 with IGBT technology pure sine wave output, double conversion with aut...
Supply, Installation, Testing and Commissioning of 16CH Embedded 4K NVR 2SATA expandable up to 20TB, audio input & Output, Two way communication supported, G7.11 audio format support, 128Mb recording ...
Minimum 2 Nos. of each blow cameras to be installed and commissioned and those are:
i)Supply, Installation, Testing and Commissioning of 4MP or higher IR Dome, Fixed lens min 2.8mm DC Iris, 1/2.7 inch...
Supply and fixing of Surveillance HDD-4 TB.
Makes: As per list of recommended brands.
Supply and installation of 24 inch (60.96cm) Full HD LED Monitor with Wall Mountable Stand, Height Adjustable, HDMI and VGA Ports with all accessories. Makes: As per list of recommended brands
Installation, testing, Commissioning & Integration of CCTV system in Control room including mobile configuration and communication of entire system as per the directions of Engineer-in-Charge.
Supply, laying ,testing and commissioning of 4-pair, CAT-6 Solid (Third party ETL Intertek tested up to 700 MHZ ) to support 1Gbps with Cross (+) filler pair separator & PVC sheath 23 AWG, STP/UTP Cab...
Surge Protection Device(SPD)
Armoured Instrumentation Cables(Power, Signal & Control) with instrumentation earthing for the plant
Instrument Cable Glands with PVC Shroud:1/2" NPT
Instrument Cable Tray(100mm W X 50H X 1.6 THK) with Accessories
HDPE Cable conduit of 150mm
GI Earth flat 25x6 mm
Earth pits chamber Copper plate 300 x 300 x 6 mm electrode and its accessories
Analog Junction Boxes (Level & Pressure Transmitters with 2-wire & Flow Transmitter with 4-wire and overall 3nos. Of Junction Boxes for ISPS)
2.0 TR Split AC-1.8/1.9/2.0TR, 3 Star capable of delivering not less than 21600 BTU/hr and above with operating on refrigerant R-410A / R-32 Makes: As per list of recommended brands as category I.
Control System Consoles for Operators (1-Table Desk with 2-Chairs industrial Grade standard)
11kV Load Break Switch Panel:Supply & Erection of 11kV Load break switch panel of 630 A rating with incoming from HT Metering cubicle and outgoing to 2 nos. of 160 kVA Transformers.
Supplying and erecting Aluminium conductor, XLPE, 11 kV , 3 Core x 95 sq.mm armoured cable complete erected in approved trench or on trays as per direction of Engineer.
Indoor Termination Kit for 11 kV XLPE Screened 3 Core x 95 sq.mm cable
Earthing: for 11kV LBS Panel -Supplying fixing and wiring earth electrode for grounding of transformers, DG Sets etc. using 40 mm dia 2.9mm thick 2.5 meter long GI pipe with GI funnel with mesh and su...
LTKiosk:Supplying and fixing Moulded Case Circuit Breaker (MCCB)overthe existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protecti...
Supplying of multi function digital meter with three line back light LCD type display for voltage,Current, frequency, Power, power factor, kVA, kWH, kVARsuitable for 3phase,4wire LT network with IP 54...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying, fixing and wiring 50/5 to400/5A5VAburden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying .400 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator whic...
Fabricating supplying and mounting MSboxmade out ....SWG suitableforfloor /wallmounting, fully weather proofwith provision for better heat dissipation, provided with hinged front cover, equipped wi...
Including 10% for Installation. testing & commissioning for LT Kiosk Panel complete
supply, Transportation, Installation, Testing and Commissioning 160KV of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Ene...
Supply, Erection, Testing and Commissioning of 415V (Low Voltage) Switchgear with necessary accessories with complete-I/C: Supplying 320A MCCB (TPN) - Incomer
B/C: Supplying 320A MCCB (TPN) - Bus Coupler
DG I/C: Supplying 200A MCCB (TPN) - DG Incomer
O/G: Supplying and fixing 125A MCCB (TPN) - Submersible Pump + Spare
O/G: Supplying and fixing 200A MCCB (TPN) Spare
32A TP MCB with Single Phasing Preventer
Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz. with no volt coil and overload protection with necessary materials, etc.,
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V, AC 50 Hz 12/24 DC
Supplying and fixing of Single Phase Digital Ammeter
Supply & Fixing of Star-Delta Starter 415V, 3 phase, 50Hz. enclosed with no volt coil, overload protection and single phase preventor , etc.,
Providing, installing in panel EMPR for protection like overload, phase failure, locked rotor, phase reversal with trip indication and adjustable over current function, DIN rail mounted.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V, AC 50 Hz 12/24 DC
Supply and Fixing of Current Transformer 100/ 5A, 5 VA , class 1 accuracy
Supplying and fixing of Three Phase Digital Ammeter
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V, AC 50 Hz
Push Buttons-Start and Stop ncluding emergency Stop
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
Supplying multifunction meter digital three line back light LCD type display of voltage, current, frequency power, power factor kVA, kWH, kVaR suitable for 3 Phase 4 wire LT network with IP 54 degree ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V, AC 50 Hz
Supplying and fixing of LED type panel board indicating lamp for Phase indication ndicating lamp with required colour suitable for 220V, AC 50 Hz ( Red, Yellow, Blue).
The cost for fabrication panel, Copper busbars, interconnecting cables,mounting fasterners, terminal box etc. Installation, Commissioning and transportation
MOV DB-I/C: 32A MCCB (TPN)
O/G: 16A MCB (TP)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V, AC 50 Hz12/24 DC
The cost for fabrication panel, Copper busbars, interconnecting cables,mounting fasterners, terminal box etc. Installation, Commissioning and transportation
Indoor Lighting DB-8-Way DB
63A, 4P, MCCB (Incomer)
63A, 2P, RCCB (Incomer) with 100mA to 300 mA Sensitivity
10A, SP, MCB (Outgoings)
30 KVAR Automatic Power Factor Capacitor Panel
Supply, installation, testing & commissioning of 415 V Fully automatic Microprocessor based soft starter with built in bypass arrangement for pump control application as per general specification as u...
Four Pole 63A, 10KA, MCB
Double Pole 6A to 32A, 10KA, MCB
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V, AC 50 Hz12/24 DC
Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC, 50 HZ with suitable SMC enclosure of IP 54 protec...
Supplying capacitor type 1200mm high breeze ceiling fan with regulator (on switchboard) ceiling fan complete with down rod blades, shackle canopies etc., for operation on 230 volts , 50 cycles. Single...
1.1kV, Aluminium conductor, XLPE / PVC insulated & armoured cable-4CX16 Sq.mm Aluminium conductor
3.5CX70 Sq.mm Aluminium conductor
3.5CX240 Sq.mm Aluminium conductor
3C x 4 Sq.mm Copper conductor
3C x 6 Sq.mm Copper conductor
3C x 95 Sq.mm Aluminium conductor
1.1kV Copper Control Cables with Cables, Termination kits, glands, lugs, straight thru joints etc. with all required accessories. All complete works.4C X 2.5 sq mm , Cu. Conductor
Providing and laying RCC cable duct of size given below for laying electric cable including form work for centering M.S bar reinforcement including providing and fixing 35x35x5m, MS angles, RCC precas...
Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 600mm x 50mm x 2mm thick (Power Cables)
300mm x 50mm x 2mm (Power Cables)
150mm x 50mm x 2mm (Control Cables)
Hume pipe for Road crossings for Cable & Earth Strip crossing RCC Hume Pipe, 2000 mm Long, 150 mm Dia
Collars for RCC Hume Pipe
Laying of RCC Hume pipes
Supply and transportation of 90W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F greater than 0.9...
Supplying of LED light fitting 1 x 4 - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70percent lumen maintenance with CRI greater than 80. ...
Supplying of recess mounting non integral type LED modular down light 2x2 /1x4 34-36 W LED luminaire comprising of pressure decast/extruded aluminiumhousing, with spring loaded false ceiling clA, Powe...
Supplying and erecting 2 x 36 / 40W FTL corrosion proof capsule type in non-corrosive polycarbonate housing and prismatic polycarbonate cover with individual high power electronic ballast saving Power...
Supply of 90W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...
Supply of 40W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...
Fixing all types & all capacities LED fittings Indoor on the wall /ceiling/rafters/gridders using 23 / 0.76 " twin twisted PVC insulated wires required Nos of round blocks and clA..
Supplying and Fixing 40mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street ligh...
Fabricating, supplying and erection of 8ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...
Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...
Supplying and fixing surface/flush mounting 4-5 way unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, M...
Supplying and fixing superior quality 4module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the ex...
Supplying and fixing of 6A one way modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Wiring for lighting/power circuit using 2.5 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Wiring for lighting/power circuit using 1.5 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ...
Supplying and fixing surface/flush mounting 8 way unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Mac...
Supplying and fixing superior quality 8 module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...
Supplying and fixing of 16A one way modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Supplying and fixing of 6/16A universal socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Wiring for lighting/power circuit using 4 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/power circuit using 2.5 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Short point (not exceeding 3m)-Heavy gauge PVC Open conduit pipe 32mm dia and 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc, and fixing using inverted w...
Short point (not exceeding 3m)Wiring for lighting/power circuit using 4 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed sys...
Short point (not exceeding 3m)-Wiring for lighting/power circuit using 2.5 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
Medium point wiring-Heavy gauge PVC Open conduit pipe 32mm dia and 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc, and fixing using inverted wood plugs i...
Medium point wiringWiring for lighting/power circuit using 4 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiri...
Medium point wiring-Wiring for lighting/power circuit using 2.5 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of w...
Long point above 6m and up to 10m-Heavy gauge PVC Open conduit pipe 32mm dia and 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc, and fixing using inverte...
Long point above 6m and up to 10m-Wiring for lighting/power circuit using 4 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed...
Long point above 6m and up to 10m-Wiring for lighting/power circuit using 2.5 sq.mm FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or conceal...
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / owder coate...
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / owder coate...
Supplying fixing and wiring earth electrode for grounding of transformers, DG Sets etc. using 40 mm dia 2.9mm thick 2.5 meter long GI pipe with GI funnel with mesh and suitable size reducer fixed on t...
Supplying fixing and wiring earth electrode for grounding conduits, I.C.cutouts and other equipments on the meter board using 40 mm dia 2.9 thick GI pipe 2.5 meter long buried in a pit. The pit should...
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 75 x 12 mm GI (Trf. Body, neutral, Main Earth Grid etc.)
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm GI (MCC Panels, Main Motors etc.)
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI (Cable Trays, LDBs, street Lighting etc.)
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI (Valve DBs, Fan DBs etc.)
Supplying and running of GI wire for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas.spacers etc. 10 SWG (Receptacles)
Supplying and running of GI wire for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas.spacers etc. 8 SWG (Small Motors)
Vertical Air Terminal 8 mm Aluminum Round Conductor complete as per requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) 2 Mtrs Length
Vertical Air Terminal 8 mm Aluminum Round Conductor complete as per requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) 3 Mtrs Length
Roof conductor holder for parapet Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree ...
Polyamide roof cable holder for flat roof DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black at 1 meter distance
Fang Fix Junior system Inclusive of Al interception rod of 1Mtr length (10mm dia), Quick mounting of the interception rod in the base using plug technology
Cross universal connector For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanized iron with necessary screws etc as required. Installed with 4 hexago...
Expansion piece with connector For equalizing temperature related length changes. Necessary on conductors of length over 20 meters. For round conductor Rd 8/ALU connector: For T cross and parallel con...
Down Conductor 8 mm Aluminum Round Conductor complete as specified in drawing & meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305)
Roof conductor holder for parapet-Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree ...
Test Joint-Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer
Supplying fixing and wiring earth electrode for grounding conduits, I.C.cutouts and other equipments on the meter board using 40 mm dia 2.9 thick GI pipe 2.5 meter long buried in a pit. The pit should...
Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 Mtr long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coatin...
Providing & Fixing of Electrical insulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 / 2006 with one side anti skid abberation marks and pasting t...
Supplying and Erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg capacity cartridge type conform to IS 2876/15683 complete erected with necessary clamp made of 50x6 mm M.S. flat nut and bolts g...
Rubber Hand gloves 15 kV, SEAMLESS Confirming to IS (Sample to be verified for seamless before approval) for electrical purpose
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicin...
Supplying and fixing of shock treatment chart on the wall with inside plastic sheet cover and plywood back plate frame work complete
Supplying and fixing of danger board made out of MS sheet metal with duly painted with red oxide and enamel paint. (Medium Voltage)
Supplying and fixing of danger board made out of MS sheet metal with duly painted with red oxide and enamel paint. (High Voltage)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document - 2nd call_Hemmigepura.doc
Tender Document • 1.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .