REPAIR / IMPROVEMENT TO E/M INSTALLATION IN ZONE A AND REPAIR / MAINT TO WATER SUPPLY CI / DI / GI DISTRIBUTION NETWORK AND CONNECTED WORKS AT DAMANA UNDER GE JAMMU

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft / loose soil or hard / dense soil for taking up or laying of galvanised iron / ci pipe line complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and as directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Taking out unserviceable sluice valve of size 100 / 150 mm bore dia in position for repair complete with refacing, regrinding, replacing staffing box of spindle, nut, bolt, washer, rubber gaskits, repair to GM seat with gasket, gland cup filling gland dori and refixing after repair in site complete all as specified and as directed.

Material and labour for replacement of cast iron sluice valve PN 1.6 with iron wheel head of size 150 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and as directed.

Material and labour for replacement of cast iron sluice valve PN 1.6 with iron wheel head of size 100 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and as directed.

Material and labour for replacement of cast iron sluice valve PN 1.6 with iron wheel head of size 80 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and as directed.

Material and labour for replacement of cast iron non return valve PN 1.6 of size 150 mm bore with stainless steel working part conforming to ISI 5312/2004 duly IS marked complete with rubber gaskit 3 mm thick and nut, bolts and washer couple complete all as specified and as directed.

Material and labour for replacement of cast iron air release valve with double orifice with rubber valve of size 150 mm bore conforming to ISI 14845 complete with rubber gaskit and nut, bolts and washer complete all as specified and as directed.

Material and labour for replacement of cast iron air release valve with double orifice with rubber valve of size 80 mm bore conforming to ISI 14845 complete with rubber gaskit and nut, bolts and washer complete all as specified and as directed.

Material and labour for replacement of foot valve of size 80 mm bore dia flanged end, lift type conforming to ISI 4038 with stainless steel working part complete with rubber gaskit and nut, bolts washers etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement of foot valve of size 40 mm bore dia flanged end, lift type conforming to ISI 4038 with stainless steel working part complete with rubber gaskit and nut, bolts washers etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement of cast iron split coller of size 150 mm dia complete with rubber gaskit 3 mm thick and nut, bolts, washer etc complete all as specified and as directed.

Material and labour for replacement of cast iron split coller of size 100 mm dia complete with rubber gaskit 3 mm thick and nut, bolts, washer etc complete all as specified and as directed.

Material and labour for replacement of sluice valve spindle stainless steel suitable for 150mm sluice valve complete with check nut complete all as specified and as directed.

Material and labour for replacement of sluice valve spindle stainless steel suitable for 100 mm sluice valve complete with check nut complete all as specified and as directed.

Labour for repair / rectification of leakage of underground cast iron / ductile iron pipe line of size 80 to 150 mm bore dia in position complete with excavation approximate 1.0 X 1.0 X 1.0 metre around the leakage, returning filling including removal, cutting / dismantling of leakage complete with and including cocking to existing lead joint, filling new lead joint burning and taking out existing lead joint as per site requirement and restore the water supply complete all as specified and as directed. Note: - Spare / fitting shall be measured and paid separately.

Supply and fixing in replacement of unserviceable bolt 16 mm dia X 6'' long fully threaded with counted head nuts and washer heavy duty conforming to ISI for mild steel column pipe / cast iron flanged pipe complete all as specified and as directed.

Material and labour for cleaning to overhead RCC reservoir of any capacity internally at approximate 40 feet high stagging by using water treatment chemical / bleaching powder / sodium hypochloride chemical including cleaning internally entire wall surface, removing deposited particular, scrubbing complete wall surface and applying coat treatment water chemical on complete wall and drain out the water after disconnecting all rising / distribution sluice valves complete with painting to mild steel / steel railing / rising / distrbution / wash out cast iron pipe with different colour complete all as specified and as directed and writing date of tank cleaning.

Material and labour for rectification of leakage in distrbution cast iron pipe line 150 mm bore dia of RCC overhead reservoir approximate at 40' to 60' height outside the reservoir near doom complete with replacement / cocking of lead, spun yarn, rubber gaskets, nut, bolt, washers of suitable size and made the pipe line leakage free complete all as specified and as directed. Notes: - (i) Rates are deemed to be included charges of hiring T&P, Veh, Ladders, steel shuttering or any equipment required at site. (ii) Contractor shall be fully responsible for life insurance of the person deployed at site and get the repair under his supervision visitor from the qualified technician.

Material and labour for replacement for filling cast iron spigot and socketed joint of any size Lead pig complete all as specified and as directed.

Material and labour for replacement for filling cast iron spigot and socketed joint of any size Lead wool complete all as specified and as directed.

Material and labour for replacement for filling cast iron spigot and socketed joint of any size Spun Yarn complete all as specified and as directed.

Supply and fixing in replacement suction sweeper head for swimming pool (pool cleaner) 36 inch long complete with wheels, PVC core nylon brush 36 inch NRV complete all as specified and as directed.

Supply and fixing in replacement suction flexible rubber hose pipe 80 mm dia braided type green colour conforming to ISI complete with suitable size mild steel clamp complete all as specified and as directed.

Repair / Maint / service to swimming pool filteration plant complete with replacement of unserviceable spare parts fitting valves, filter media, PVC strainer, pressure gauge, butterfly valve, air vent pipe complete with cleaning internally including taking out all filter media outside and kept separately each media at site for reuse, preparing external services of filter media and make the surface smooth and applying two coats of synthetic enamel paint and a coat of red oxide primer compete with suction and discharge pipe and relaying all filter media in proper layer duly washed and tested on full load complete all as specified and as directed. Note: - Spare shall be measured and paid separately.

Supply only water pressure gauge 10 Kg 100 mm dia complete with 3/8 inch brass sampling cock complete all as specified and as directed.

Supply only butterfly valve cast iron body with gun metal sheet conforming to IS : 13095 of size 150 mm dia complete all as specified and as directed.

Supply only superior quality copper sulphate complete all as specified and as directed.

Supply only superior quality crystal alumimium non-ferric for swimming pool complete all as specified and as directed.

Supply and fixing in replacement PVC insulation patch roll for submersible cable conection complete all as specified and as directed.

Supply and fixing in replacement of tubing galvanised iron "medium grade" 15 mm bore dia fixed to wall, on floor complete with fitting including taking down existing tubing complete all as specified and as directed.

Supply and fixing in replacement of submersible cable 16 Sqmm 3 core flat copper conductor heavy duty 1100 volts grade confirming to ISI complete all as specified and as directed by Engineer-in-Charge. Note: - Old cable shall br deposited in store yard.

Supply and fixing in replacement of onload open execution change over switch front handle operated 4 pole, 415 volt, 50 Hz, 125 Amp confirming to IS complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of onload change over switch side handle operated 4 pole, 415 volt, 50 Hz 100 Amp confirming to IS complete all as specified and as directed by Engineer-in-Charge.

Taking up cast iron / ductile iron water mains (including all fittings) of dia 80 mm with spigot and socket ends and lead joints including burning out joints or flanged ends including disconnecting pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Taking up cast iron / ductile iron water mains (including all fittings) of dia 100 mm with spigot and socket ends and lead joints including burning out joints or flanged ends including disconnecting pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Taking up cast iron / ductile iron water mains (including all fittings) of dia 150 mm with spigot and socket ends and lead joints including burning out joints or flanged ends including disconnecting pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and laying mild steel black pipe P/E ISI marked conforming to IS : 1239 PART -1 (2004) of 80 mm dia bore medium grade (B Class) with flanged end joints at both ends as per site requirement in trenches, on ground or on the support above ground level by continuous welding joints 15mm thick flange joint, nuts and bolts and gaskets and testing complete, duly painted with two coats of bituminuous paint externally complete all as specified and as directed by Engineer-in-Charge.

Supply and laying mild steel black pipe P/E ISI marked conforming to IS : 1239 PART -1 (2004) of 100 mm dia bore medium grade (B Class) with flanged end joints at both ends as per site requirement in trenches, on ground or on the support above ground level by continuous welding joints 15mm thick flange joint, nuts and bolts and gaskets and testing complete, duly painted with two coats of bituminuous paint externally complete all as specified and as directed by Engineer-in-Charge.

Supply and laying mild steel black pipe P/E ISI marked conforming to IS : 1239 PART -1 (2004) of 150 mm dia bore medium grade (B Class) with flanged end joints at both ends as per site requirement in trenches, on ground or on the support above ground level by continuous welding joints 15mm thick flange joint, nuts and bolts and gaskets and testing complete, duly painted with two coats of bituminuous paint externally complete all as specified and as directed by Engineer-in-Charge.

Material and labour in repair of tubing galvanised iron "medium grade" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 100 mm dia complete all as specified and as directed.

Material and labour in repair of tubing galvanised iron "medium grade" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 80 mm dia complete all as specified and as directed.

Material and labour in repair of tubing galvanised iron "medium grade" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 50 mm dia complete all as specified and as directed.

Material and labour in repair of tubing galvanised iron "medium grade" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 40 mm dia complete all as specified and as directed.

Material and labour in repair of tubing galvanised iron "medium grade" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 25 mm dia complete all as specified and as directed.

Material and labour in repair of tubing galvanised iron "medium grade" with all fittings laid in floor or trenches including taking out old unserviceable pipe of size 20 mm dia complete all as specified and as directed.

Material and labour in repair of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm bore complete all as specified and as directed.

Material and labour in repair of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm bore complete all as specified and as directed.

Material and labour in repair of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and as directed.

Material and labour in repair of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and as directed.

Labour for repair / rectification of leakage of underground water pipe line galvanised iron of size 20 to 100 mm dia with excavation approximate 1.0 X 1.0 X 1.0 metre around the leakage, returning filling in, removal, cutting / disconnecting to existing leakage GI pipe line in position for repair / rectification of leakage, replacement of unserviceable fittings and welding work as per site requirement and restore the water supply complete all as specified and as directed. Note: - Spare / fitting shall be measured and paid separately.

Supply only GI union 100 mm dia complete all as specified and as directed.

Supply only GI union 50 mm dia complete all as specified and as directed.

Supply only GI union 40 mm dia complete all as specified and as directed.

Supply only GI union 25mm dia complete all as specified and as directed.

Supply only GI union 20 mm dia complete all as specified and as directed.

Supply only GI Socket 100 mm dia complete all as specified and as directed.

Supply only GI Socket 50 mm dia complete all as specified and as directed.

Supply only GI Socket 40 mm dia complete all as specified and as directed.

Supply only GI Socket 25 mm dia complete all as specified and as directed.

Supply only GI Socket 20 mm dia complete all as specified and as directed.

Supply only GI Elbow 50 mm dia complete all as specified and as directed.

Supply only GI Elbow 40 mm dia complete all as specified and as directed.

Supply only GI Elbow 25 mm dia complete all as specified and as directed.

Supply only GI Elbow 20 mm dia complete all as specified and as directed.

Supply only GI Tee 50 mm dia complete all as specified and as directed.

Supply only GI Tee 40 mm dia complete all as specified and as directed.

Supply only GI Tee 25 mm dia complete all as specified and as directed.

Supply only GI Tee 20 mm dia complete all as specified and as directed.

Supply only GI Nipple 40mm dia 6 inch long complete all as specified and as directed.

Supply only GI Nipple 25 mm dia 4 inch long complete all as specified and as directed.

Supply only GI Nipple 20 mm dia 4 inch long complete all as specified and as directed.

Supply only GI reducer 25/20 mm dia complete all as specified and as directed.

Supply only GI reducer 20/15 mm dia complete all as specified and as directed.

M/s Koul & Sons (BID ID -3097354)

M/S Shiv Enterprises (BID ID -3113007)

DARVESH ENGINEERING WORKS (BID ID -3112500)

M/s Sahib Construction and engineers (BID ID -3113760)