REPAIRS POLISHING AND PAINTING OF FURNITURE FOR OTM ACCN AT NABAGRAM MIL STN UNDER GE (P) PANAGARH

Amount

Almirah steel large (Drawing No : FD 1031)

Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting. All as directed by Engineer-in-Charge and shown on drawing

Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-charge/GE.

Removing the worn out u/s lock from almirah and providing /fixing with new lock 6 lever with dublicate key ISI marked with round shape of MS key plate as approved by Engr-in-charge/GE duly fixed as per drawing.

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original position as per drg.

Removing the worn out u/s leg and providing/ fixing the new leg madeout of Ms sheet 1.00 mm thick in its original position duly welded as per drg

Taking out of u/s wornout shelf and providing the new one of existing size and shape madeout of MS sheet 1.00 mm thick all as shown on drg

Removing the worn out paint from internal/ external surface of almirah steel large by scraping, necessary preparation of surface for painting duly dented/painted and smoothen the surface by putty and painting the the internal and external surface with two coats of synthetic enamel paint over a coat of primer metal to bring the swurface to a glossy shine as directed by Engr-in- charge

Almirah steel Medium (Drawing No : FD 67/(M)/1032)

All as per item no. 1.01 here in before but for almirah steel medium

All as per item no. 1.02 here in before but for almirah steel medium

All as per item no. 1.03 here in before but for almirah steel medium

All as per item no. 1.04 here in before but for almirah steel medium

All as per item no. 1.05 here in before but for almirah steel medium

All as per item no. 1.06 here in before but for almirah steel medium

All as per item no. 1.07 here in before but for almirah steel medium

Repair /re-canning of chair easy (FD-229). Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well sesoned (Teak) and fixing the same in its original position as per drawing

Front legs

Front rail of seat frame (Hole should be 12.5 mm apart of each other

Side rail (Ditto complete)

Back rail (Ditto complete)

Arm rest

Remove the existing u/s canning and supply and weave with 2mm thick new white plastic cane oval shape Godrej pattern and beading with 4 mm thick new white plastic can make Ajay /Premier as approval by GE and providing the new hard rubber shoes on legs below of chair easy.

Preparation of surface by remove of existing polishing mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge.

Chair CB steel With Arm (FD-75M)

Removing the worn out paint by scrapping from the steel surface , necessary preparation of surface for painting and welding wherever required , two coat of spray painting with synthetic enamel paint olive green over a coat of metal primier after dent bent portion. Wooden surface would be black polish to required glazed and shine.

Removing the worn out u/s seat frame and providing / fixing the new one of existing size made out of 1st class teak wood duly recanning with new plastic paint 2mm thick oval shape for general weaving and 4mm thick plastic cane for breading all around as shown in drawing. Wooden frame should be finish with black polish and fix in its original position with required screw (plastic cane type-I HDPE).

All as per item 4.02 here-in before but back frame.

Removing the worn out u/s handle made out of H.W(T.W) well sesoned and providing/fixing of existing size and shape with required screw after finish with black polish.

Chair CB steel Without Arm (FD-75M)

All as per item no. 4.01 here-in-before but for chair CB steel without arm.

All as per item no. 4.02 here-in-before but for chair CB steel without arm.

All as per item no. 4.03 here-in-before but for chair CB steel without arm.

Table 900X600X76 mm steel (FD-1007)

Removing old broken damaged top of table 900X 600 X760 mm steel and S&F new top made out of 18/19 mm thick prelaminated particle board one side teak veneered phenol formaldehyde exterior grade with 19X4 mm teak wood beading fixed with headless nails all around the top.

Removing the existing steel long rail from Table 900X600X760 mm and S&F new steel long rail of size 25mm X25mm X1.6mm thick all as shown on drg and directed by Engineer-in-Charge.

Removing the existing MS Legs from 900X600X760 mm and S&F new leg made out of 25mm X25mm X MS tube 1.6mm thick all as shown on drg and directed by Engineer-in-Charge.

Remove the existing stiffner bottom and S&F new stiffner bottom made out of 25mm X 25 mm, MS tube of 1.6 mm wall thickness all as shown on drg and directed by Engineer-in-Charge.

Remove the existing Short stiffner and S&F new short stiffner made out of 25mm X 25 mm, MS tube of 1.6 mm wall thickness all as shown on drg and directed by Engineer-in-Charge.

Remove the existing u/s shoes from table 900X600X760 mm and S&F new PVC shoes suitable for 25 X 2 mm MS tube, all as shown on drg and directed by Engineer-in-Charge.

Painting (remove the existing worn out paint from table 900X600X760 mm and applying one coat of synthetic enamel paint black over a coat of primer all as shown on drg and directed by Engineer-in-Charge.

Repair of chair dinning (FD/MAP/II/05)

Remove the existing u/s broken PVC sheet from chair dinning and S&F the new PVC sheet 4 mm existing size in its original position all as shown on drg and directed by Engineer-in-Charge.

Remove the existing u/s under mentioned members and providing the new one made out of 1st class H.W well seasoned (teak) and fixing the same in its original position all as per drg.

Front Legs

Rear legs

Front rail of seat frame

Side rail (ditto complete)

Back rail (ditto complete)

Short stiffner

Back rest batten

All as per item no. 3.07 herein before but for charpoy wooden

Locker Steel (FD-1029)

removing old broken damaged hasp & stapples of locker steel and S&F new hasp & staples of size 150 mm long CP to the shutters of locker steel.

Removing old broken handle of locker steel and S&F new handle of size 100mm long D type CP to the shutters of the locker steel.

Removing old broken hanging rod of locker steel and S&F new hanging rod made out of 20mm dia CP pipe 500mm long of locker steel

all as per 1.07 but for locker steel.

Table Office officer steel (FD-1003/84(M)

Removing old broken damaged top of table office officer steel and S&F new top made out of 18/19 mm thick prelaminated particles board one side teak veneered with standard PVC edging all around the top.

Removing old u/s internal drawer locks from table office officer steel and S&F new internal drawer locks 40 mm 4 lever with dublicate keys of approved quality.

removing old broken u/s hard rubber shoes of table office officer steel and S&F new hard rubber shoes of approved quality and tightly fitted at the bottom of the legs of the table office officer steel complete all as specified as shown on drg.

All as per item no. 1.07 but for table office officer steel.

Table Office clerk steel (FD-381/1004)

Removing old broken damaged top of table office clerk steel and S&F new top made out of 18/19 mm thick prelaminated particles board one side teak veneered with 19X4 mm teak wood beading duly french polished all around the top.

Removing old u/s internal drawer locks from table office clerk steel and S&F new internal drawer locks 40 mm 4 lever with dublicate keys of approved quality.

Removing old broken u/s rubber shoes of table office clerk steel and S&F new hard rubber shoes of approved quality and tightly fitted at the bottom of the legs of the table office clerk steel complete all as specified as shown on drg.

All as per item no. 1.07 but for table office clerk steel.

Table office clerk wooden (DB-4120)

Removing of existing u/s table top and S&F new table top made of 18 mm thick prelaminated particle board exterior grade one side teak face supported with french polish teak wood edging all around.

Removing of old u/s drawers of table office clerk and S&F new drawers made out of 1st class teak wood well seasoned and 6 mm thick plywood (5Ply) commercial BWR Gde complete all as directed and shown on drg.

Removing old u/s knob from drawers of table office clerk wooden and S&F new CP Brass knob 35 mm dia of approved quality.

Removing of old u/s stiffners of table office clerk and S&F new stiffner made out of 1st class teak wood well seasoned complete all as directed and as shown on drg.

Remove of old u/s existing short stiffner and S&F new short stiffner of existing shape and size made of 1st class hard seasoned teak wood free from knots duly french polished.

Remove of the u/s existing long rail and S&F new rails made of 1st class hard seasoned teak wood free from knots duly french polished.

Remove the old u/s existing short rail and S&F new rails of 1st calss hard seasoned teak wood free from knots duly french polished.

Remove the old u/s existing legs and S&F new legs of existing shape and size made of 1st class hard seasoned teak wood free from knots duly french polished.

Preparation of surface by remove of existing polising mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engineer-in-Charge.

Charpoy hard top MAP (FD/MAP-II/01)

Remove the existing u/s plywood from charpoy ip sq with ply and making the frame to its original position by tightening etc and S&F with new plywood 12 mm thick, commercial , BWR grade (IS-303) of existing shape and size and as directed by Engineer-in -Charge.

All as per item No. 1.07 herein before but the charpoy hard top MAP.

Table Dinning 6 pers MAP (FD/MAP-II/03)

All as per item no.11.01 Herein before but in table dinning 6 pers.

Removing old u/s legs of table dinning 6 pers and S&F new legs of size 750X45X90 mm made out of 1st class well seasoned teak wood duly fixing PVC rubber shoes at the bottom of legs with mild steel screw complete all as directed & shown on drg.

Taking out old u/s long rail and S&F new long rail of size 1500X45X90 mm made out of 1st class well seasoned teak wood complete all as directed and shown on drg.

All as per item no. 13.03 Herein before but short top rail of size 900X45X90 mm.

Removing old and u/s MS right angle from the corner of table dinning 6 pers and providing & fixing new one of size 150X30X5 mm with MS screw complete all as directed and shown on drg.

Preparation of surface by removing of existing polishing mark scratchs from all exposed wooden surface to make clean and smooth with required grade of sand paper and finsh with polish to bring the surface to require the glossy finish for table dinning 6 pers and as directed by Engineer-in Charge.

Table dinning 4 pers (MAP) (FD/MAP-II/03)

All as per item no.11.01 Herein before but in table dinning 4 pers .

Removing old u/s legs of table dinning 4 pers and S&F new legs of size 750X45X90 mm made out of 1st class well seasoned teak wood duly fixing PVC rubber shoes at the bottom of legs with mild steel screw complete all as directed & shown on drg.

Taking out old u/s long rail and S&F new long rail of size 1200X45X90 mm made out of 1st class well seasoned teak wood complete all as directed and shown on drg.

All as per item no.14.03 Herein before but short top rail of size 900X45X90 mm.

Removing old and u/s MS right angle from the corner of table dinning 4 pers and providing & fixing new one of size 150X30X5 mm with MS screw complete all as directed and shown on drg.

All as per item no. 13.06 herein before but for Table dinning 4 pers.

Repair of table dressing (FD/MAP-II/07

Remove the u/s top of table dressing ladies/gents and providing & fixing the new one made out of 18 mm thick prelaminated MDF board of size 350X380 mm with 4 mm teak wood beading on front side and fixing the same in its original position.

Remove u/s side of table dressing and providing the new one mad eout of 18 mm thick prelaminated MDF board one side teak face and fixing the same in its original position.

remove the u/s front door shutter and providing the new one made out of 18 mm thick prelaminated MDF board one side teak face and fixing the same in its original position.

Remove the u/s plywood from the back of the box of table dressing and S&F The same with new one 6 mm plywood of size 1150X550 mm.

remove the u/s handle of table dressing and providing the new one CP 50/75 mm As approved by GE and fixing the same in its original position.

Remove the u/s Plywood from the back of the mirror and providing the new one made out 6 mm green ply BWR commercial and fixing the same in its original position as per drg.

Remove the u/s broken mirror and providing the new one of size 1300X450 mm , 5.00mm thick make golden fish / Swastik or as appprove dby GE/ Enginner-in-Charge and fixing the same in its original position.

All as per item no. 13.06 here-in before but the table dressing.

MISCELLANEOUS

Repair of hat stand, with 1st calss teak wood well seasoned and CP hook as approved by Engineer-in-Charge.

Repair of hot case broken in appropirate accessories.

Repair and replacement of glass (5'X3') of notice board.

Repair of cover of back steel MAP including all accessories.

Repair of rifle rack 20 space including all accessories as directed by Engineer-in Charge.

Repair of top of safe meat box including all fittings as directed by Engineer-in Charge.

Repair /replacement of cover of back steel MAP and lecture stand , side board , stool adjustable as including all necessary items.

Repair/ Replacement of Mirror of book case steel as directed by Engineer-in Charge.

M/S Ali Trading Co

UNIQUE ENTERPRISE