Electrification and lighting arrangement on Angwali bridge under GM unit, Dhori Area.

Amount

Supply of cement pole.

Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and re-filling etc. as required. : Above 8.0 metre and upto 11.0 metre

Supply and fixing of Ariel Bunch cable(4core)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75cm deep) and re-filling etc. as required : 80mm dia.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75cm deep) and re-filling etc. as required : 50mm dia.

M.S. angle 50 x 50 x 6mm1.5’ x 88 nos. = 132’ x 0.3048 = 40.23 mtr. x 4.5Kg/m

Erection of pipe pole.

Supplying and fixing of 32mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40mm x 3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and erection of 100 mm x 65 mm pin insulator with G.I. spindle and nuts etc. as required.

Cutting of G.I. pipe 2” dia.

Welding.

Erection and fabrication of M.S. angle.

M.S. clamp (for fixing of pole) 6”

Nut, bolt with washer 8” x 5/8”

Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified size and shape including form work, plastering if specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/pipe not to be deducted)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, ‘’C’’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole & neutral.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. : 4 Module (125 mm x 75 mm)

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 200 Amp TP&N.

Supply and fixing of timer switch 100 Amp

Supply and fixing of LED light 50 watt.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES (BID ID -1127156)

M/S UPENDRA ELECTRICAL (BID ID -1127145)