REPAIRS TO HARDSTANDING, PATHWAYS AND CERTAIN MISC WORKS AT 58 SU CHIMNEY HILLS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specified and directed.

Dismantling wrought iron or mild steel work/trusses/purlins/pillars of any description not otherwise provided for

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl over screed bed or bedding layer of mortar 15mm thick for laying tiles in cement mortar 1:6 complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl over screed bed or bedding layer of mortar 15mm thick for laying tiles in cement mortar 1:6 complete all as directed.

M&L for PCC 75mm thick, 1:4:8 type D-2 40mm stone aggregate as in sub base of flooring complete all as specified and directed.

M & L hard core of broken bricks gauge n. exc 63 mm, deposited spreaded and leveled in layer not exc 15 cm thick, watered and rammed to atrue surface, broken stone or boulder.

M&L for Prepolished Chequered cement concrete tiles of size 30cm X30cm X 25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thich screed bed in CM 1:6 complete (Colour and pattern as approved by Engineer-in-Charge).

M&L for provinding 100mm thick cement concrete in 1:2:4 type B1, (using 20mm graded stone aggregate) finishing cement concrete surface even and fair without using extra cement as in plinth Path/hardstanding complete all as directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats confirming to Fe 410 W (Gde E-25) quality A all as directed by Engr-in-Charge.

M&L preparation steel surfaces with two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation old steel surfaces and applying two coats of Synthetic enamel paint (Trusses/CGI Sheet as in roof) complete all as specified and directed.

M&L Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces of cement finshed even and smooth without using extra cement complete.

M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed complete.

Taking down cement plaster on brick work or stone walls etc incl raking out joints hacking for key scrubbng down with water complete all as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete (Colour and pattern as approved by Engineer-in-Charge).

M&L for Sand as sand cushioning for laying interlocking tiles complete all as specified and directed.

M&L preparation of old decorated surfaces of wall, pillasters, cornices etc and applying one coat cement base paint complete all as directed

M&L preparation and washing, rubbing down and stopping of distempered and painted surfaces of wall including cornices and applying one coat of acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete as per manufacturer's specification complete all as directed.

M&L Plain cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F for 110mm outer dia PVC (SWR) pipes songle socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F in repairs PVC (SWR) bends 110mm dia with access door any radius all as specified and as directed..

S & F in repairs PVC (SWR) junction single, 110mm dia with access door (Single T) equal or unequal all as specified and as directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl Nainital or similar pattern roof covering all as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based (corrugated or mangalore tile pattern) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws (Colour and pattern as approved by Engineer-in-Charge) all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note:- An Amount of Rs.6835 on A/c of Sch. of Credit 'A' Part II Shall be deducted from the total amount of BOQ to arrive at the Contract Sum.

chowdeshwariconstructionco (BID ID -3256967)

KUZHIKKAL ENTERPRISES (BID ID -3253305)

LAKSHMI CONSTRUCTIONS (BID ID -3256262)

UNIVERSAL ENGINEERING (BID ID -3250965)