Darbhanga Jila Sadar Prakhand ke antragat Panchayat Sahawajpur me thana No-449 khata No-2243 khesara No-1124 me mahadalit samudayik bhawan sah workshed ka Niraman.

Surface dressing of the ground

Earth work in excavation in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth )

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sqm 285.20 sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coement content as per approved desing mix, including pumping of concrete to site to laying but excluding the coste of centering, shuttering, finishing an including retard setting fo concrete, Improve workability without impairing strength and admixtures in recommended proportions as per IS:9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge, Note:- Cement content considered in this item is @ 330 kg/cum, Excess or less cement used as per design mix is payable or recoverable separetely

Centring and shuttering including strutting, propping etc. and removal of form for.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:4 (1 cement: 4 coarse sand )

Brick work with bricks of class designation 100A in S/S and plinth in :Cement mortar 1:4 (1 cement: 4 coarse sand )

Half brick masonry with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse send)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position sal wood

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size 50x47mm with a wall thickess of 5mmm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 guage, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-in-Charge.

Providing and fixing ISI marked flush door non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete (best make of approved quality)

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete .

Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod do…..do….all complete job

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.

Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units.

Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel but hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-incharge:

Providing and fixing circular cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing bright finished brass casement window fastners of minimum weight 200 gms to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing bright finished brass peg stays 300 mm long of minimum weight 330 gms.to side hung steel windows with necessary welding and machine screws etc. complete.

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement.

Providing and fixing glass strips in joints of terrazo/cement concrete floors.

meter

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete

12 mm cement plaster of mix:

15 mm cement plaster on rough side of single or half brick wall of mix.

6 mm cement plaster to ceiling of mix :

12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement

White washing with lime to give an ever shade

Finishing walls with water proofing cement paint of approved brand and manufacture and of required

Applying priming coat:

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Providing 12 mm thick water profing cement plaster (1:3)….....

Bricks-

Providing and fixing water closel squatting pan (Indian type W.C pan) with 100mm sand cast Iron C4:C15P or S trap, 10 litre low level white p.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

Providing and fixing on wall face unplasticised- PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion

metre

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplastised PVC rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion

Providing and fixing unplasticised- PVC pipe elips of approved design to unplasticised- PVC rain water pipes by means of 50X50X50mm hard wood plugs, scdrewed with M.S screws of required length including curring brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams

Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides, ramming of bottoms depts upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in the layers not exceeding 20 cm in depts including consolidating each deposited layers by ramming watering and desposing of surplus excavated soil as directed within a lead of 50m

Pipes cables etc exceeding 80mm dia but not exceeding 300 mm dia

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete

150 mm dia R.C.C. pipe

Constructing brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix (1 cement, 4 coarse sand, 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement, 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 finished with floating coat of neat cement complete as per standard design

Inside size 90X80 cm and 45 cm deep including C.I. cover with frame (light duty) 455X610 mm internal diamension total weight of cover and fram to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

India mark-II Hand Pump with all accessories including 8 Nos. (3 Mtr length each) connecting rod and one syllinder Confirming IS: 155000 (Part 1- 8)/2008

125 mm dia UPVC Casing Pipe confirming to IS: 12818- 1983/1992

32 mm dia medium quality G.I. Riser Pipe and 8 Nos. 3 mtre length (3 mtr each length confirming IS: 1239

40 mm dia x 2 mtr, long UPVC RIBEED Strainer confirming to IS: 12818- 1983/1992

125 mm dia x 40 mm x UPVC reducing socket (Heavy Quality)

40 mm nominal outer dia CPVC Pipe

Supplying all materials labours and equipment for constructing platform with foot rest etc. all complete job (Detail Est attached)

Supplying drain 3 m as per design etc. all complete job (Details Est attached)

Boring by jet dheki by suitable cutter or reduce as the case may be lowering 125 mm UPVC x 40 mm dia G.I. Pipe & Stainer of standard quality iron shoe plug & socket etc. all complete including providing all tools and oplants required for the job as per specification and direction of the engineer in charge

Supplying labour and equipment including 125 mm dia G.I. cap & fitting and fixing over the T/W properly and taking it out as per direction of E.I (Cap will be property of the contractor) I No

Providing all labours for fitting and fixing of India mark II hand pump including supplying all tools and plants required for all job complete as per direction of E/I

Supplying all tools equipment all labours for lowering 32 mm dia medium quality G.I. Pipe (Riser pipe) in drilled T/W in 3 mtrs lenth

Providing all labour for fitting and fixing of deep cylinder with the rised pipe including necessary connecting and jointing materials, chrom leather bucket jointing materials, chrom leather bucket all tools & plants required for the job low water lever all complete job as per specification and direction of E/I

Supplying all materials & labours for arrangement of additional water required during the drilling work all complete job as per specification and direction of E/I

Developing and Testing of R/W till the discharge is free from sand one item all complete job as per specification and direction of E/I

Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 Sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required. Group-B

Supplying and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type on the existing switch box including connections etc. as required

Supplying and fixing suitable size GI/PVC box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet & 6A switch piano type connection painting etc. as required

Supplying and drawing low resistance co-axial T.V. cable RJ-6 grade copper conductor PE insulated, with PVC sheath in the existing PVC concuit etc. as required

Supplying and fixing piano type T.V. antenna socket on the existing metal box including making connection, etc as required

Wiring for circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required

Meter

Meter

Supplying and fixing metal box of following size in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required

Supplying and fixing 8 way double door single pole and Neutral sheet steel M.C.B. D.B. 240 Volts in recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and power painted including nting, earting etc. as required (But without MCB/RCCB/Isolator) (UPS DB)

Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Earthing with G.I earth pipe 4.5 mt. long 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. including providing salt and charcoal for pipe earth elelctrode as required

Providing and laying earth connections from earth electrode with 4.00 mm Dia copper wire in 15 mm Dia G.I. Pipe from earth electrode as required

Providing and fixing 25mm x 5mm GI strip on surface for connection etc as required

Providing and fixing 4mm dia copper wire on surface or in recess for loop earthin etc. as required

Supplying and fixing bulkhead fitting die cast aluminium alloy body with prismatic glass cover suitable for the GLS/CFL lamp directly on wall/ceiling including connections with 1.5 sq. mm. FR PVC insulated, copper conductor single core cable etc. as required

Supplying and fixing 2 pin 5 Amp ceiling rose on the existing junction box/PVC box including connection etc. as required

Supplying and fixing batten/angle holder including connections with 1.5 sq. mm FR PVC insulated, copper conductor single core cable etc. as required

Supplying and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sqm mm FR PVC insulated insulated copper conductor etc as required

Supply and Installation of 300 mm, 230 V A.C. exhaust fan in the existing opening, including making good the damage, including making good the damage, connection, testing, commissioning etc. as required

Supplying and fixing powder coated strip fitting complete with electronic ballast, 4'x40 watt fluorescent lamp etc. directly on ceiling/wall including connections with 1.5 sq. mm FR PVC insulated, copper conductor single core cable etc. as required