D/o 81 hect. of land acquired recently in ph IV and V, Sector-31 and 32, Rohini and (2) D/o 119 hect. of land acquired recently in ph IV and V, Sector-31 and 32, Rohini.

Supply, erection,testing and commissioning of HOT Dip galvanized octagonal steel pole of 11 mtr height and made out of 3 mm thick sheet PCD 320 mm having bottom 200 mm A/F & top 100 mm A/F with built in connector box of size 500 mm x 100 mm with ring of minimum 250 mm width made of 4 mm thick Sheet on window cover for anti theft arrangement at 2500 mm height from base plate, M.S base plate of size 320 mm x 320mm x 20 mm thick, double overhang G.I. bracket made of 3.60 mm thick M.S. pipe with 400 mm long top galvanized tube of suitable dia to accommodates the fittings, on existing RCC foundation i/c supply of 4 nos. M-24x850mm long (150 mm top threaded portion & 100mm bend), G.I foundation bolts(L Type) & nuts (EN 8-grade) 3 Nos. and 2 Nos. washer, along with 2 Nos. templates/Anchor plate of size 320 mm x 320 mm x 4 mm thick, having 4 Nos. 26 mm dia. holes to match with PCD of pole and base plate, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking, numbering of pole etc. complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes:- (a). 6 mm thick phenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b). Supply & fixing 63 Amp terminal block suitable for 16 sq. mm conductor- 4 nos. & shorting links-5 nos. on DIN Channel i/c pdg and fixing DIN channel of suitable length- 2 nos. on existing laminated sheet (c) terminal suitable for 6 SWG G.I Wire/1.5 sq. mm wire (d) 6 Amp, SP MCB,10 KA, ‘C’ Series – 2 nos. including mounting on din channel, earth stud 2 nos. welded at suitable height i/c washers & nuts etc. (e). Suitable arrangement for saddling of incoming / outgoing cables i/c lugs/thimbles etc as required.

Supply, erection,testing and commissioning of HOT Dip galvanized octagonal steel pole of 11 mtr height and made out of 3 mm thick sheet PCD 320 mm having bottom 200 mm A/F & top 100 mm A/F with built in connector box of size 500 mm x 100 mm with ring of minimum 200 mm width made of 4 mm thick Sheet on window cover for anti theft arrangement at 2500 mm height from base plate, M.S base plate of size 320 mm x 320mm x 20 mm thick, triple overhang G.I. bracket made of 3.60 mm thick M.S. pipe with 400 mm long top galvanized tube of suitable dia to accommodates the fittings, on existing RCC foundation i/c supply of 4 nos. M-24x850mm long (150 mm top threaded portion & 100mm bend), G.I foundation bolts(L Type) & nuts (EN 8-grade) with 3 Nos. and 2 Nos. washer, along with 2 Nos. templates/Anchor plate of size 320 mm x 320 mm x 4 mm thick, having 4 Nos. 26 mm dia. holes to match with PCD of pole and base plate, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking, numbering of pole etc. complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes:- (a). 6 mm thick phenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b). Supply & fixing 63 Amp terminal block suitable for 16 sq. mm conductor- 4 nos. & shorting links-5 nos. on DIN Channel i/c pdg and fixing DIN channel of suitable length- 2 nos. on existing laminated sheet (c) terminal suitable for 6 SWG G.I Wire/1.5 sq. mm wire (d) 6 Amp, SP MCB,10 KA, ‘C’ Series – 3 nos. including mounting on din channel, earth stud 2 nos. welded at suitable height i/c washers & nuts etc. (e). Suitable arrangement for saddling of incoming / outgoing cables i/c lugs/thimbles etc as required.

Providing and laying in position, M25 reinforced cement concrete foundation of size 750mm long x 750mm wide and 1800 mm deep i/c excavation of earth, refilling, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia. 1900 mm long (approx.)-8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia. 2900 mm long (approx.)-10 Nos. (With 150 mm spacing) i/c centering & shuttering as required positioning of foundation bolts and providing 63 mm (OD) 2 Nos. DWC pipe suitable length each for cable entry and exit etc complete as required.

LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt utput . LM79 & LM80 Test report from NABL lab for all testing required or LED fixtures as per BIS shall be submitted. Shape size and CCT shall be approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 200 watt

Supplying and drawing following sizes of 1.1 KV grade FRLS PVC insulated copper conductor Single core cable in the existing surface/recessed steel conduit as required. a) 3 x 1.5 Sq.mm

4 x 16 Sq.mm

4 x 25 sq.mm

Upto 35 sq. mm