Work of refurbishment of existing 1 MLD STP at JP Park, Mathikere (2nd Call)

Jungle Cleaning

Clearing and grubbing including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. In the area of thorny jungle

Providing Interlock Pavers

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 200mm thick

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)

Wall Painting inside

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Wall Painting outside

Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Doors & Windows

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm.

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made).

GI Sheet Roof

Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).

Structural Steel for beams & Joists

Barbwire Fencing

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m(minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Razer Fencing for 120 mts

IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm~13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets.

IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm~13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets.

Supply, Installtion, Testing and Comissioning - 16 Channel 16 HDDs RAID NVR with Support Ultra 265/H.265/H.264 video formats and support Up to 12 Megapixels resolution recording with 16 SATA HDDs, Up to 16TB for each HDD, Hot-Swap with ANR technology to enhance the storage reliability when the network is disconnected. NVR to have Support cloud upgrade and Support N+1 Hot spare - The price should include the necessary mounts and brackts - The Price should include the necessary Mounts and brackets

Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required

Supply, Installtion, Testing and Comissioning of SIP mini intercom is designed for indoor scenes, integrated 16 Port L2 Managed PoE with Built-in 1W speaker and Acoustic Echo Canceller (AEC) and Support audio codec G.722 and Opus, HD audio on speakerphone and handset ---- etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work

Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required

Supply, Installation, Testing and Commissioning of 6-core OFC - Armoured outdoor cable (SM) ---- etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work.

Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work.

Supplying and drawing UTP-CAT 6E LAN cable

Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick

Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel

Supplying & Fixing of switch mounting rack with power manager & Cable manager 9U with 450mm depth

Epoxy painting for bioreactor

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Wash room renovation

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class-Economy.

Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class-Economy.

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class-Economy.

PVC Storage Tank 1000 litres capacity for drinking and other purpose with float ball valve

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia with specials including collars, bends, gate valves, reducers

Furnitures (Table-2 no, Chairs-6 No, Ceiling Fan-2 no)

Plant Name Board and Process unit labels

Construction of PLC/SCADA control room over existing Secutiry room 10ft x 10ft with 2 windows and 1 door, acces staircase, point wiring, flooring, plasting and painting.

Total

Annexure -2

Mechanical Works

Tag No.T01: Coarse Screen Chamber

Tag No.T02: Raw sewage collection Tank / Sump.

Tag No.T03: Settling chamber or Colletion Tank / Sump

Tag No.T04: Fine Screen Chamber

Tag No.T05: Grit chamber

Tag No.T06: Anoxic Tank

Tag No.T07: Aeration Tank

Tag No.T08: MBR Tank

Tag No.T09: Permeate Tank

Jell filled pressure guages with accessories

Alum dosing system

Sludge Mixers: Supply, Installation,Testing of top mounted agitator with supports for fixing on top sludge sump, provided 20W/m3 mixing

Note: The above cost is inclusive erection, testing and commissioning.

Total

Annexure -3

Electrical & Instrumentation Works

LT Switchgear panel

Supply and installation of new LT/MCC switchgear panel as per the exiting original ratings with new switch gears, meters, SFUs, Bus bars, knobs etc

PLC/SCADA System for complete plant.

Design, Manufacture, Supply, Installation Testing and Commissioning of Indoor type PLC Panel, Fabricated out of min. 2mm thick CRCA sheet complete with latest configuration, necessary programming software for PLC & SCADA and comprising of all accessories not limited to the following:- Programmable Logic Controller (PLC) with Dual Hot Redundant CPU, Power supply, Communication Module, IO & Processor rack (Standard DC), Back up Interface/Expansion Module, Rack (Backplane) for IO and Processor. SCADA software shall have facility VPN, OPC, Smart Client, Web Enabled, Automation Report Generation, Archiving, Trends, Data Logging, 15" HMI Screen on panel, GSM/GPRS Communication Module etc

Supply, erection, Testing and commissioning 250 kVA Diesel Generator set with 900 Lt capacity diesel storage tank, switchgear panel, civil foundation and Aquostic Enclosure.

Overhauling, replacments of oils and other accessories (If found defective) testing and commissioning of 250 KVA Power Transformer

Analog type Tank level Indicators with necessary cabeling up to PLC/SCADA system. 1. Raw Sewage Colletion Tank - 1 No. 2. Settling chamber / collection sump - 1 No. 3.Aeration Tank - 2 Nos. 4. MBR Tank - 2 Nos. 5.Permeate Tank - 2 Nos 6 Chlorine Contact Tank - 2 Nos. 7. Spare - 2 Nos.

Online Analizer (Influent and effluent chamber)

DO Meter for Aeration Tanks.

Electro-Mangnetic Flow meter (FIT) 100mm

Electro-Mangnetic Flow meter (FIT) 150mm

Electro-Mangnetic Flow meter (FIT) 200mm

Pressure Transmitters

Power, Control and instrumentation cables with cable carrying system and earthing necessary for the complete plant.

Point wiring, LED Lighting Fixtures (60W) for process uints, plant peripheral lighting (min 20 nos) ceiling fans (2nos), Exhaust fans (4nos)

Supply, Installation, Testing, and Commissioning of Online Continuous Effluent Monitoring System (OCEMS) for Sewage Treatment Plant Self-Surveillance in Compliance with CPCB Standards Excluding Flow Meter and including device with all accessories complete in all respect for real time data transmission to CPCB & KSPCB. (RUIDP 2023 SR, Pg no. 385, It no. 43.31)

Supply and installation of 1.5 Ton Airconditioner for PLC/SCADA room.

Note: The above cost is inclusive erection, testing and commissioning.

Total

Annexure - 4

Operation and Maintenance

Manpower

Consumables

Major & minor repair: works in Civil, Electrical & Mechanical: All the major and minor repairs of Civil, mechanical electrical and Instrumentation & automation equipments are to be carried out. The spares required for this and also any replacement required in all the mechanical, electrical equipments and Instrumentation & automation equipments are included in this item. Whatever the spares required for all major and minor repairs shall be provided even though they are not listed in detail. The cost shall be Inclusive of all the items required for completion of the item a)Repairs/Replacement Includes All plant and equipments installed/comissioned/operated by BWSSB within the premises of UWTP.c) Servicing and calibration of Instruments d) Maintenance of Street Lightings and Building Lightings e) Emptying the Aeration Tank and removing of Settled slit and Servicing of Diffuser system and maintenance of the same,, Miscellaneous f)Safety items required for O&M for STP i.e., All the required safety items shall be supplied such as First aid Kit, Uniforms, Safety items, Gumboots, Safety helmets, Masks, Hand gloves, goggles,Safety belt, Apron for chemical handling Wind scok, lifebuoys, fire extinguisner, sand buckets etc. Miscellaneous items which are not included in the list, but not limited to shall be carried out for smooth operation of STP with all legal compliance.

Operation and maintanance of Online Analizer

Transportation and Disposal of Grit and Sludge-the grit / sludge generated in the Grit chamber /Screens have to be collected and transported outside in the environmentally friendly manner. The waste generated in the treatment plant site shall also be disposed off. The cost shall be inclusive of all the Items required for completion of the Item. A) JCB charges b) Tractor/Lorry charges etc.

Grand Total for one year

REFURBISHMENT OF EXISTING 1 MLD SEWAGE TREATMENT PLANT (STP) USING MEMBRANE BIO-REACTOR (MBR) TECHNOLOGY AT J.P. PARK, MATTHIKERE, BENGALURU.

Price Schedule Grand Summary

Civil Works

Mechanical Works

Electrical and Instrumentation works

Operation and Maintenance for 2 years

Grand Total (1+2+3+4)