Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC FLAT NO 827 NEW YASHODA PUBLIC SCHOOL URBAN ESTATE 2 HISAR | HISAR | HISAR | HARYANA | ₹3.6 L | L1 | Accepted-AOC ok |
| 2 | L2₹3.7 LRejected-Finance DHANI KATWAR | ₹3.7 L | L2 | Rejected-Finance L2 Bidder |
| 3 | L3₹3.7 LRejected-Finance | ₹3.7 L | L3 | Rejected-Finance L3 Bidder |
| 4 | L4₹3.8 LRejected-Finance JHAJJAR | ₹3.8 L | L4 | Rejected-Finance L4 Bidder |
| 5 | L5₹4.0 LRejected-Finance | ₹4.0 L | L5 | Rejected-Finance L5 Bidder |
| Sl No | Description | Qty | Unit | RAJENDER L4 | The Mandhaniya Co-op Labour and Construction Society Ltd. Mandhan L3 | The Baba Mast Nath Cooperative Labour and Construction Society Limited L5 | The Sihag Cooperative Labour and Construction Society Limited Dhani Katwar L2 | The Parbhat Co.op L&C Society Ltd. L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | a | 1 | Sqm | - | 1 ₹1 | 1 ₹1 | 1 ₹1 | 1 ₹1 |
Tender Value
₹4.0 L
EMD Value
₹8,020
Closing Date
27 Jan 2026, 5:00 pmClosed
SURENDER
Sewani W.S. Divn. Bhiwani
Construction of regulation hut at PH-3 of Siwani Canal.
2026_HRY_497724_1
2026B5EBFDBE 346B 41A4 8C4A B9DA4DF0F66E129IRR
Open Tender
Civil Works
30 days
MANDHAN
Construction of regulation hut at PH-3 of Siwani Canal.
3 documents required · 3 mandatory
₹500
Yes
₹8,020
Yes
10 Feb 2026
19 Jan 2026
28 Jan 2026
19 Jan 2026
27 Jan 2026
19 Jan 2026
Percentage BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil. HSR Rate(Rs.) 83.00 Through Rate
HSR Item 6.1.4-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 4. 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) HSR Rate(Rs.) 2911.00 Through Rate
HSR Item 7.21.2-Brick work with common burnt clay nonmodular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 3968.00 Through Rate
HSR Item 7.21.2-Brick work with common burnt clay nonmodular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate(Rs.) 3968.00 Through Rate
HSR Item 11.5.3-12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) HSR Rate(Rs.) 113.00 Through Rate
HSR Item 11.25.1-Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 1. Flush / Ruled/ Struck or weathered pointing HSR Rate(Rs.) 79.00 Through Rate
HSR Item 10.9-Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling. HSR Rate(Rs.) 342.00 Through Rate
HSR Item 9.57.1-Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1. 75 mm diameter HSR Rate(Rs.) 121.00 Through Rate
HSR Item 22.85.1-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 1. 15 mm nominal outer dia Pipes HSR Rate(Rs.) 131.00 Through Rate
HSR Item 12.24.4-Planking of commercial hard wood, such as Hollock, champ, chikrassy and chaplash etc., (Non-coniferous timber other than teak conforming to I.S. specification no.1003 kiln-seasoned) planed on both sides, rebated and fixed in position, including nails and screws, etc:- 4. 30 mm thick HSR Rate(Rs.) 1802.00 Through Rate
HSR Item 12.55.2-Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 2. 100x58x1.90 mm HSR Rate(Rs.) 25.00 Through Rate
HSR Item 12.65.1-Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 1. 300x16 mm HSR Rate(Rs.) 149.00 Through Rate
HSR Item 12.66.3-Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 3. 150x10 mm HSR Rate(Rs.) 41.00 Through Rate
HSR Item 11.78-Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR Rate(Rs.) 31.00 Through Rate
HSR Item 11.63-Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. HSR Rate(Rs.) 29.00 Through Rate
HSR Item 11.63-Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. HSR Rate(Rs.) 8.00 Material Rate
HSR Item 22.181-Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR Rate(Rs.) 7.00 Through Rate
HSR Item 23.7.1.1-PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 1.1. PVC CONDUIT and MS/GI BOX only for LIGHT/FAN/Call bell point wiring Group A HSR Rate(Rs.) 127.00 Through Rate
HSR Item 23.1.4.1-COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 4.1. Wiring in MS conduit system for 3- pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as required Group A HSR Rate(Rs.) 867.00 Through Rate
HSR Item 23.8.3.4-FITTING AND ACCESSORIES 3.4. Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite sheet as below 200 mm X 150 mm X 60 mm deep metal box HSR Rate(Rs.) 158.00 Through Rate
HSR Item 23.8.3.3-FITTING AND ACCESSORIES 3.3. Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite sheet as below 180 mm X 100 mm X 60 mm deep M.S. Box HSR Rate(Rs.) 112.00 Through Rate
HSR Item 12.19.2.1.2-Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 2.1.2. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated Hollock wood HSR Rate(Rs.) 1685.00 Through Rate
HSR Item 11.93.1-Finishing walls with water proofing cement paint of required shade : 1. New work (Two or more coats applied @ 3.84 kg/10 sqm) HSR Rate(Rs.) 39.00 Through Rate
HSR Item 22.103.2-Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 2. 20 mm nominal bore HSR Rate(Rs.) 294.00 Through Rate
HSR Item 22.1.2-Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 2. White vitreous chinaware Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap HSR Rate(Rs.) 1329.00 Material Rate
HSR Item 22.96.2-Providing and fixing brass bib cock of approved quality : 2. 20 mm nominal bore HSR Rate(Rs.) 268.00 Through Rate
HSR Item 6.14.2-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) HSR Rate(Rs.) 3875.00 Through Rate
HSR Item 6.33.6-Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more HSR Rate(Rs.) 66.00 Through Rate
HSR Item 6.30.3-Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform HSR Rate(Rs.) 208.00 Through Rate
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
BOQ_576283.xls
BOQ • 0.33 MB
OT0148570.pdf
Other Document • 2.21 MB
Download all tender documents and submit your bid