REPAIR OF STP W S BUNGLOW NO 109 COD AGRA AND CONVOY PK P H OLD DISTRIBUTION PUMP HOUSE WAC PUMP HOUSE AND SEWAGE INSTALLATION WAC WELL NO 1 2 OF 17 PARA MAP PH II PUMP HOUSE WAC LINE SIGNAL PUMP HOUSE MH PH AND KLP COLONY PUMP HOUSE UNDER

Amount

Excavation in trenches in soft/loose soil, n. exc. 1.5 M wide and n.exc 1.5 M in depth, to required level and gradient for laying of pipe etc and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified and directed

Removing excavated materials (soft/loose soil) to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as specified and directed

Taking up/down 200mm bore of cast iron/ductile iron water mains(including all fittings), with spigot and socket ends and lead joints including burning out joints and receiving lead complete all as specified & directed

All as per item No-4 above but 400mm bore pipe.

Supply, laying and jointing for 200 mm bore centrifugally cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/2000 any length for classification of K7 suitable for rubber gasket joint (push on type) with cement mortar lining inside the pipe with outside zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush as specified and directed.

All as per item No. 6 above, but 400mm bore

Cutting existing Cast Iron/Ductile iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc), 200mm bore of pipe complete all as specified and directed.

All as per item No. 8 above, but 400mm bore pipe

M&L for push on tyton (rubber gasket) joints for 200mm bore DI pipe complete all as specified and directed.

All as per item No. 10 above, but 400mm bore pipe

M & L for servicing and testing of sewage treatment plant air compressor set of capacity 10 to 15 HP, 3 phase 415 volts by opening end cover, replacement connection lead ,greasing the both end of bearings and replacement of bearing ,meteling/policing of shaft,replcing worn out nut bolts ,gasket,air release valve key gland stuffing box male/female set, rubber bush, descalling of impeller and replacing of impellor key & neck ring (impellor guide) and other minor erpair required and painting one coat of synthetic enamal paint with connected LT panel complete all as specified and directed

Taking down vertical non clog sewage pump set 15 HP capacity any make and in any position alongwith column pipe from well after dewatering the well and disconnecting delivery end connection with the help of chain pully / tripod and cleaning the all parts and inspecting/checking the servicebility state of all parts and repairing / replacing the unserviceable parts with new parts, rewinding and reassembling the whole parts in its original position and lowering the pump set complete with column pipe in the well and fixing / connecting with existing delivery/suction complete all as specified and directed.

Taking down non clog submersible sewage pump set 10 HP to 12.5 HP capacity any make and in any position alongwith column pipe from well after dewatering the well and disconnecting delivery end connection with the help of chain pully / tripod and cleaning the all parts and inspecting/checking the servicebility state of all parts and repairing / replacing the unserviceable parts with new parts, rewinding and reassembling the whole parts in its original position and lowering the pump set complete with column pipe in the well and fixing / connecting with existing delivery/suction complete all as specified and directed.

Taking down non clog submersible sewage pump set 5 to 7.5 HP capacity any make and in any position alongwith column pipe from well after dewatering the well and disconnecting delivery end connection with the help of chain pully / tripod and cleaning the all parts and inspecting/checking the servicebility state of all parts and repairing / replacing the unserviceable parts with new parts, rewinding and reassembling the whole parts in its original position and lowering the pump set complete with column pipe in the well and fixing / connecting with existing delivery/suction complete all as specified and directed.

Opening of Non clogg submersible pump and removing the blockage of pump from impeller/delivery pipe such as plastic material, poly bage other solid materials etc and reassembling of pump using new gasket complete all as specified and directed.

Labour only for removal and disposal of sludge formed on the dry bed (6 Nos of dry bed) to a distance exc 1.5KM but not exc 3 KM i.e. out side the periphery of defence land from bed and well including cleaning of bar screen complete all as specified and directed.

M&L for removing the sludge /concrete peices/bricks bats deposited inside the well of size 6M internal dia, 12.0M deep having sludge upto 6 feet + 1.0 Feet height from the bottom of well completely by manually without filling inside the pipe/suction/delivery line of pump and remove the sludge to a distance not more than 50 M from well after de-watering the sewage well with pump or any other method including removing the unwanted substances like polythene bags, chappels, plastic bottles etc complete all as directed by Engr-in-charge. Note :- (a) Contractor shall ensure the full safety of Labour working inside the well in all respect. (b) Safety belts, safety mask etc should be provided by the contractor for the persons working inside the well.

All as per item no-18- above but from the well 7.5 mtr deep and 6 mtr internal dia

All as per item no-18- above but from the well 7.0 mtr deep and 6 mtr internal dia

Cleaning of FAB reactor chamber, setteling tank, sludge collection chamber and clean water collection chamber, replacing air pipe of FAB reactor chambers complete all as specified and directed.

M & L for fiber base FAB media for development of bacterias round in shape/hexagonal devided in multi layers to increase the surface area of media (as per sample) ( MBBR Media MOC-P/P-HDPE- Virgin) complete all as specified and directed.

M & L for Tube settler Media MoC-HDPE, Hight 844m, complete all as specified and directed

M&L for cleaning/opening the blockage in sewage line 200mm dia bore with sewage jet cleaning machine having capacity of cleaning up to 200 feet long in one attempt including earthworks complete all as specified and directed

M&L for cleaning/opening the blockage in sewage line 150mm dia bore with sewage jet cleaning machine having capacity of cleaning up to 200 feet long in one attempt including earthworks complete all as specified and directed

M&L for proviiding hypo solution of 6% concentration for treatment of sewage treated water complete all as specified and directed.

S&F in repair flow meter for air compressor with conical type weight complete all as specified and directed.

M&L for applying one coat of superior quality synthetic enamel paint on the equipment installed at STP like air blower, pump motor and pipe line connected with STP equipment complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Fixed type, 25 to 100 Amps with breaking capacity 16KA omplete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA omplete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA omplete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA omplete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 350 Amps with breaking capacity 36 KA omplete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA omplete all as specified and directed.

S&F in repair single phase preventor for protection for submersible pump against over loading, reverse phase, single phasing complete all as specified and directed.

S&F in repair cable PVC insulated submersible cable 2.5 sqmm copper conductor, 3 core, 1100 volts grade complete all as specified and directed.

S&F in repair cable PVC insulated submersible cable 4 sqmm copper conductor, 3 core, 1100 volts grade complete all as specified and directed.

S&F in repair cable PVC insulated submersible cable 6 sqmm copper conductor, 6 core, 1100 volts grade complete all as specified and directed.

S&F in repair cast iron non return valve 80mm bore ISI marked both ends flanged including rubber gasket, MS bolts, nuts, washers and testing complete all as specified and directed.

S&F in repair sluice valve, Class PN-1, 400 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed.

S&F in repair sluice valve, Class PN-1, 300 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed.

S & F in repairs cast iron sluice valve for the 150 mm bore both ends flanged, PN-1.0, with iron wheel (ISI marked) steel spindle,including nuts, bolts, washers and 3 mm thick rubber insertion sheet complete all as specified and directed.

S&F in repair sluice valve, Class PN-1, 100 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed.

S&F in repair sluice valve, Class PN-1, 80 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified & directed.

Repairs to leakage of 300 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 250 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 200 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 150 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 100 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 80 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

S&F in repair 200 mm bore foot valve, cast iron body, manufacturing standard IS 4038, pressure rating PN-2 with flanged and drilled ends cast iron body, Hinged leather seat, ISI marked, including all joints, bolts and nuts, washers, including taking up / down old unserviceable valve from any position and any addition / alteration for fixing required complete all as specified and as directed.

S&F in repair 100 mm bore foot valve, cast iron body, manufacturing standard IS 4038, pressure rating PN-2 with flanged and drilled ends cast iron body, Hinged leather seat, ISI marked, including all joints, bolts and nuts, washers, including taking up / down old unserviceable valve from any position and any addition / alteration for fixing required complete all as specified and as directed.

S & F in repair stainless steel spindle of sluice valve 200mm bore including check nuts complete all as specified and directed.

S & F in repair stainless steel spindle of sluice valve 150mm bore including check nuts complete all as specified and directed.

S & F in repair stainless steel spindle of sluice valve 100mm bore including check nuts complete all as specified and directed.

S & F in repair stainless steel spindle of sluice valve 80mm bore including check nuts complete all as specified and directed.

S&F in repair change over switch front operated, open excution type, 4 pole, 415 Volts, 100 Amps including making all incoming/outgoing cable connections using new aluminium lugs complete all as specified and directed.

S&F in repair change over switch front operated, open excution type, 4 pole, 415 Volts, 250 Amps including making all incoming/outgoing cable connections using new aluminium lugs complete all as specified and directed.

S&F in repair change over switch front operated, open excution type, 4 pole, 415 Volts, 400 Amps including making all incoming/outgoing cable connections using new aluminium lugs complete all as specified and directed.

Supply & fixing in replacement of old unserviceable GI column pipe 100mm dia, Heavy grade, both end flanged 3 mtr long complete with nut bolts washer and ruber washer for fixing of pipe suitable for non clogging sewage submersible motor pump set complete all as specified and directed.

Repair to header using mild steel, plain, black sheet, 4mm thick in wall cladding, cut to size, fixed to headers at verios locations of water supply installations with 40mm lap join by welding seams, including bending or turning up, mitred angles etc as required,complete all as specified and directed

Supply and fixing 100 watt , LED security Flood light made out of pressure die cast aluminium housing with toughned glass , IP66 protection and impact resistance IK07 ,mounted on top of the pole with cap type bracket having lenght not less than 0.31 meter fixed with suitable fasteners having extended arm length not less than 1.5 meter and dia not more than 43 mm and angle between pole and extended arm should be 100 to 105 degrees including fabrication work for fixing Building security light . including PVC insulated three core 23/0.0076 copper cable and includinding suitable size of pvc flexible conduit from celling rose to building security light fittings complete all as specified and directed

S&F LED security light width aluminum pressure die cast housing, high purity PC Fresnel dissfuser with silicon gasket for IP-65 protection, power consumption 70 Watt & luminaire lumen >70000 lm and system efficiency > 1000 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and twp coats aluminum paint including nuts, bolts and washers complete all as specified and directed.

S&F in repair of wiring on wall/surface laying in trenches PVC insulated 1.5 Sqmm, 3 core copper conductor 1100 Volts grade cable drawn through PVC conduit pipe of 20mm dia complete all as specified and directed.

M/S SHRINATH CONTRACTION

RAJEEV CONSTRUCTION

M/s SCHOLASTIC ENTERPRISES

M/s S.M. Construction