Repair to brick work, joinery, painting, plumbing, roofing, flooring and other misc repairs in Offrs Md accn under GE Gurdaspur.

Amount

Taking down chowkats or frame of size not exceeding 1.50 Sqm each, with shutter (without taking off shutter from frames) complete all as specified and directed

Taking down chowkats or frame of size exceeding 1.50 Sqm but not exceeding 4 Sqm each, with shutter (without taking off shutter from frames) complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm and not exceeding 2 sqm each.

S&F pressed steel frames of size 125 x 60mm, for doors, one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and tarring and sanding to inner surface (surface in contact with concrete/brick surface) of chowkats and painting two coats of synthetic enamel paint over priming with red oxide zinc chrome to outer surface after preparation of surfaces complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S&F flush shutters, 35 mm thick, solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Factory made Solid PVC moulded door shutter of 28 to 30 mm thk , 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face flush shutter - wood free consisting of frame made out of MS tubes of 19 gauge thickness and size 19 x 19 mm for stiles as well as top , bottom and lock rail. MS frame shall have coat of metal primer . The inside panel shall consisit of PUF ( Poly urethane Foam) insulation of min density 40 kg / Cum with 7 mm thk ( + or - 5mm) thick printed ( multi coloured Sheet) on both sides of the inside panel all the four edge of the panel to be sealed with lipping of 10mm thk sheet bottom ( made of sticking two Nos ) . Rigid Sheets of 5mm thk using PVC solvent cement adhesive . Door Edge lipping to painted with PVC ink of matching colour of rigid sheet of door 20mm thk ( 5mm x 4 nos) thick sheet to be given for lock provision at lock height Complete all as specified and directed.

S&F structural steel framed work as in door or gate of angle or other section with gusset plates, rails, braces etc complete and similar work drilled for fixing of steel sheeting or other coverings. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings, running rails and guides) and hanging; also fixing and fastening complete conforming to Fe-250 Gde -E 165 and complete all as specified and directed.

S&F 35 mm thick factory made 2nd class HW glazed and skelton shutter open rebated and prepared to receive glass, gauzed etc edges of framing plain chamfered fitted with cut and mitred beads for securing with mesh all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete al as specified and directed.

S&F aluminium alloy anodised, sliding door bolt, with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. Length of bolt 300mm.

S&F in repair aluminium alloy anodised, sliding door bolt, with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. Length of bolt 300mm.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. Length of bolt 150mm.

S&F in repair aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. Length of bolt 150mm.

S&F aluminium alloy handles, fabricated type anodised complete all as specified and directed. Size 150mm.

S&F spring for door, 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

S&F in repair spring for door, 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

Dismantling boarding, any description fixed in any position with nails.

S&F veneered particle board, 18/19 mm thickness, solid core, exterior grade, with decorative face veneers one face with decorative fasteners as in shelf, drawers, cupboard, partition etc complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. Width of flaps (when open) 40 mm.

S&F magnet catch of approved qualities 75mm size complete all as specified and directed.

S&F butt hinges 75mm medium weight, cold rolled mild steel and fixed.

S&F in repair of telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed.

S&F in repair knobs, 40 mm dia, cup board knobs, fixed with nut, screw and washer of mild steel , bright finish complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass, 3mm thick, ordinary quality, in squares, not exceeding 0.50 Sqm in each pane fixed oil putty complete all as specified and directed.

S&F figured glass, 3mm thick, pin headed type and glazing with oil putty, in squares, not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass, 4mm thick, ordinary quality, in squares, exceeding 0.50 Sqm in each pane fixed oil putty complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed to door shutter of overall length of cover plate 140mm.

S&F MS box type window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm double rebated comprises of glazed & gauged skelton shutter of (required no of gauged shutters and glazed shutters) ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (four Nos for each window) including following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07 including taking down old window :- (i) Hold fast,150mm long of 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/06 (vii) M S guard bar 12mm square bars @120mm C/C fixed horizontly. (viii) Incl two coat of synthetic enamel paint over one coat of primer on steel surfaces.

M&L two coats of synthetic enamel painting over priming coat of red oxide-zinc chrome primer to new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described, including preparation of surfaces

M&L two coats of synthetic enamel paint over priming coat of pink primer on new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion paint , white or tinted complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of walls including cornices and applying two coat of distemper oil emulsion,white or tinted complete all as specified and directed.

M&L for preparation of old decorated plastered surface by complete removal existing treatment and applying two coats of OBD over 1mm thick wall putty to make surface smooth and applying complete all as specfied and directed

M&L preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of cement paint complete all as specified and directed.

M&L preparation of old decorated surface by complete removal of existing treatment and applying one coat of texture paint of approved shade over one coat of primer over one coat of wall Birla putty complete all as specified and directed

M&L preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc and removing of rubbish to a distance exceeding 50m away but not exceeding 100m away at low laying area.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed

M&L applying two coats of oil bound distemper over and including 1mm thk wall putty on newly plastered surfaces of wall complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound finish even & smooth complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of cement primer on newly plastered surfaces of wall complete all as specified and directed.

M&L for rendering 05 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed

M&L for prepration of newly plastered or un plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan pedestal pattern, coloured, including fixing bolts( excluding flushing cistern and flush pipe ) complete all as specified and directed

Supply only plastic water closet seat cover coloured /white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F in repairs plastic water closet seat cover coloured /white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity ,low level, with inlet, ball valve, float and handle and including brackets, complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550x400mm (excluding taps, chain, plug and porcelain stopper) but including brackets, CP waste coupling 32mm bore, PVC waste pipe and cutting for pinning ends of brackets complete all as specified and directed.

S&F in repair brass CP mixer, 15mm bore, for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair flushing jet including pipe for European type closet including fixing to 15mm dia pipe suitable length with brass check nut complete all as specified and directed.

S&F in repair stop valves, 15mm bore, fancy type, chromium plated with long shank and cup , (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F in repair angle valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure, screwed on bath ends, fixed with iron pipe etc complete all as specified and directed

S & F in repairs single hand shower with 1.5 mtr flexible tube & hook complete all as specified and directed.

S&F in repair CP centre hole basin mixture 15 mm bore complete all as specified and directed.

S&F stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipe, including bedding in cement on to dwarf wall including cast iron cantilever brackets, connecting union to pipe overall size 915mm x460mm with bowl size 410mmx 330 mmx160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 900 x 600 x 300mm width made out of 1mm thick sheet including fittings arrangement complete all as specified and directed

S&F steel water tubing,15mm bore, medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete including taking down of old unserviceable pipe complete all as specified and directed.

S&F steel water tubing, 20mm bore, medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete including taking down of old unserviceable pipe complete all as specified and directed.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

S&F in repair chromium plated shower rose fancy type with CP arm complete all as specified and directed

S&F in repair PVC mirror cabinet, size 350x450mm, with shelves of best quality including fixing arrangements, complete all as specified and directed.

S&F in repairs MS pipe, 25mm bore, powder coated, chromium plated with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod complete all as specified and directed.

S&F in repair,GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed

S&F in repairs glass shelve assembly 60cm in oval shape consisting 8mm to 10mm thick glass including CP guard railing with double rail complete all as specified and directed..

S&F in repair CP wall mixer with telephonic shower arrangement and telephonic shower suitable for 15mm dia bore pipe.

S&F mortice latch, 2 levers, (vertical type), mild steel body and fixed, size 100 mm, complete all as specified and directed.

S&F in repair pillar tap, 15 mm bore, cast copper alloy with capstan head, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repairs bib tap, 15mm dia, CP, long body fancy type, screwed, high pressure for iron pipe complete all as specified and directed.

S&F in repairs bib tap, 15mm dia, CP, short body, screwed, high pressure for iron pipe complete all as specified and directed.

S&F CP health faucet (hand shower) including flexible pipe of required length fixing to 15m dia pipe with brass check nut complete all as specifed and directed.

S&F in rotional moulded polyethylene water storage tank, (cylindrical vertical with closed top) of 1000 ltrs capacity, two layers, fixed in position all as specified in SSR Part-I including one 20mm bore ball brass valve with polythene float and incl disconnecting existing old tanks complete all as specified and directed. Note: PVC tank shall be ISI marked.

S&F in repair PVC waste pipe 32mm bore fixed to WHB as per existing length complete all as specified and directed.

S&F glazed ceramic white/coloured tiles 300x 200mm x7mm thick, in vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering plaster in cement plaster 1:4 on brick surface and T/D old tiles complete all as specified and directed

M&L for coloured glazed ceramic digital tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including 10mm thick rendering plaster in CM 1:4 on brick surface and T/D old tiles complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and painted in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 and T/D old tiles complete all as specified and directed.

M&L for vitrified ceramic tiles, light shade 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 and T/D old tiles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50m but not exceeding 100m away to low lying areas complete all as specified and directed.

M&L PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) , 75mm thick, as in sub base of floor complete all as specified and directed.

M&L coloured chequered cement concrete tiles with grey cement and no pigment, 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L granite (of any type) work (table rubbed and polished), 14 to 18mm thick, in steps , jambs, pillars, window - cills, cooking plate forms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in ,Shelves incl. demolition complete all as specified and directed.

S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs, floor slabs, landing and similar work; shelves etc and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including T/D old pipes complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including T/D old pipes complete all as specified and directed .

S &F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S &F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal .with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single (Single T) equal or unequal .with access door complete all as specified and directed.

S&F110mm bore PVC (SWR) branch piece double (Double Y) equal or unequal .with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl of 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

Demolition of plain cement concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 m but not exceeding 100 m away to low lying areas complete all as specified and directed

M&L for APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gm/sqm) laid on primed surface by forced application and applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm. including cleaning of surfaces complete all as specified.

Supply only integral water proofing compound.

M&L for plain cement concrete 1:7:12 type F-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed.

M&L 75mm bore PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as specified and directed.

M&L 110mm bore PVC (SWR) 'P' trap including jointing with solvent cement complete all as specified and directed.

Dismanting brick tiles or teracing tiles, single layer on roofs complete all as specified and directd.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removing mud/ rubbish to a distance 100m but not exc 250 m complete all as specified and directed.

1:2:4 type B-0 (using 12.50mm stone aggregate) as in leveling course with water proffing compound @3% by weight of cement finished even and smooth without using extra ceemnt complete all as specified and directed.

M&L for 40mm thick brick tiles laid over 15mm thick plaster in cement mortar 1:6 and jointed, grouted flush in cement mortar mixed with crude oil @ 5% by weight of cement on roof padding flush pointing in CM 1:3 complete all as specified and didrected.

All as per Srl item No 116 above but excepts tiles.

Providing cement concrete type B1, 1:2:4 (20mm graded aggregate) in roof kerbs on mud stops rounded or chamfered on edges, water trought and the like including weathering slightly rounded and threating as directed complete all as specified and directed.

M&L for repairs to RCC chajja, facia, bottom of chajja and by taking down cement plaster/ detori old cement concrete, filling cement concrete 1:2:4 type B-0 and 10mm thick plaster in CM 1:3 finished even and smooth without using extra cement all as specified and directed.

Material & labour for Cleaning and removing all scale and dirt, etc, from PVC water tanks and from mouth of circulating pipes of any dia etc. repair to minor cracks , stopping leaking and inlet/ outlet with approved sealent, water storage tanks exc 250 ltr & n.exc 500 ltrs includingdisinfecting this tank, writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.

Material & labour for Cleaning and removing all scale and dirt, etc, from PVC water tanks and from mouth of circulating pipes of any dia etc. repair to minor cracks , stopping leaking and inlet/ outlet with approved sealent, water storage tanks exc 500 ltr & n.exc 1000 ltrs includingdisinfecting this tank, writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.

D.RAJ And CO.

multani construction co

JOGRAJ CONSTRUCTION COMPANY

RATTAN CHAND CHANDAN AND CO

P S BUILDERS