REPAIR REPLACEMENT TO CERTAIN MISC EM WORK IN MD AND OTM ACCN UNDER GE AF JAMMU

Amount

Attending complaints for checking of existing electrical points wiring upto size 6 sqmm in any Buildings for continuity, no light including carrying out minor repairs etc as required to make the item functional and replacing burnt wire ends, small pieces of wire, tightning of loose connections etc all as specified. Note- Contractor has to deploy Qualified Electrician and Helper with all necessary tools on all days to the complaint cell and complaints will be attended on the same day itself. Recovery for non attending complaints will be three times rate quoted by the Contractor. Note : a) Contractor shall provide his Electician and Helper along with necesary tools And Insulation tape to rectify defects from 0830 to 1700 Hrs on all days incl holiday & sunday b) S & F of elevant items in Sch items will not be considered in this job. c) The contractor shall depute ITI holder electrician & skiilled helper to attend complaits, with proper uniform as finalised by Engr-in-Charge, with name tag.

M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing caping/concealed with PVC conduit as per site requirment with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/modular sunken box type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc including taking down copper/aluminium point wiring (light, fan, bell, sockets or power)complete,incl fitting and fixture ssuch as switches, ceiling rose, pendents, regulators, sockets, lights fittings complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No. 2 above but with 1.5 sqmm cable for one multipin 5 amps socket outlet on same board incl taking dwon old unserviceable one.

All as per item No. 2 above but with 1.5 sqmm cable and 1.5 sqmm for earth continuity for multipin 5 amps socket outlet flush type on independent board incl taking dwon old unserviceable one.

All as per item No. 2 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board incl taking dwon old unserviceable one.

S & F switch piano button flush type, single pole one way 5 amps incl taking down old unserviceable one.

S & F in Switch bell push piano flush button single pole one way 5 amps incl taking down old unserviceable one.

S & F in piano switch two way flush button 5 amps incl taking down old unserviceable one.

S & F in 5 pin single socket outlet 2 in 1, 5 pin, 5 amps flush type incl taking down old unserviceable one.

S & F in 5 pin switch socket combination 2 in 1, 5 amps flush type incl taking down old unserviceable one.

S & F in switch socket combination 5 in 1, 5 and 15 Amp flush type controlled by one switch incl taking down old unserviceable one..

S & F in ceiling rose, 3 phase on PVC square blocks surface bakelite 65 x 50 mm, 3 terminal incl taking down old unserviceable one.

S & F in Lamp holder, PVC/Polycarbonate type with back plate for batten fittings complete incl taking down old unserviceable one..

S & F in flush type fan regulator 230V, electronic rotary stepped increase incl taking down old unserviceable one.

S & F Call bell ding dong AC, 230 Volts, single pole type incl taking down old unserviceable one..

S & F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.

S & F Switch Modular (piano) flush button single pole one way 16 amps 1 module with suitable plate and cover complete all as specified and directed.

S & F Socket outlet flush modular (piano) type 5 pin 5/6 Amps with suitable plate and cover complete all as specified and directed.

S & F Electronic Modular Fan regulator step type not less than 100/120 watt with (Two module) suitable plate and cover complete all as specified and directed.

S & F three modular sheet fitting complete all as specified and as directed by Engr-in-Charge.Make :- Indoasian(Shynora) or equivalent in Havells/Legrand

S & F four modular sheet fitting complete all as specified and as directed by Engr-in-Charge. Make :- Indoasian(Shynora) or equivalent in approved makes.

S & F Six modular sheet fitting complete all as specified and as directed by Engr-in-Charge. Make :- Indoasian(Shynora) or equivalent in approved makes.

S & F Eight modular sheet fitting complete all as specified and as directed by Engr-in-Charge. Make :- Indoasian(Shynora) or equivalent in approved makes.

S & F twelve modular sheet fitting complete all as specified and as directed by Engr-in-Charge. Make :- Indoasian(Shynora) or equivalent in approved makes.

S & F modular 16 Amps socket complete all as specified and as directed by Engr-in-Charge. Make :- Indoasian(Shynora) or equivalent in approved makes.

Supply only Fan Fastner nut and bolt with complete of size 10 mm complete all as specified and directed.

Supply only copper wire 1.5 Sqmm FRLS green/red colour single core complete all as specified and directed.

Supply and only copper wire 2.5 Sqmm FRLS green/red/black colour single core complete all as specified and directed.

Supply and only copper wire 4 Sqmm FRLS green/red/black colour single core complete all as specified and directed.

Supply and only copper wire 6 Sqmm FRLS green/red/black colour single core complete all as specified and directed.

S & F steel body heavy duty Exhaust fan 380 MM complete acessories with suitable copper wire including taking down old unserviceable / burnt exhaust fan complete all as specified and directed.

S & F PVC Exhaust fan 250 MM complete acessories with suitable copper wire including taking down old unserviceable / burnt exhaust fan.

S & F PVC Exhaust fan 200 MM complete acessories with suitable copper wire including taking down old unserviceable / burnt exhaust fan .

M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

Ditto- as per item No.34 above but size 4 Sqmm two runs and with 4 sqmm FRLS copper wire for earth continuity.

Ditto- as per item No.34 above but size 2.5 Sqmm two runs and with 2.5 Sqmm FRLS copper wire for earth continuity.

S & F LED tube light fitting 18/20 watt wall mounted LED batten with aluminum housing & integrated electronic driver incl taking down old UNSV.

S & F LED tube light fitting 9/10 watt wall mounted LED batten With aluminum housing & integrated electronic driver

S & F By Flushing to walls MCB distribution board Double door SPN 230 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors/walls etc incl taking down the old DBs incl taking down old unserviceable Make- Havells/L&T/Indoasian

S & F By Flushing to walls MCB distribution board Double door SPN 230 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down the old DBs incl taking down old unserviceable.

S & F By Flushing to walls MCB distribution board Double door SPN 230 volts 6 way with making good to disturbed surfaces of floors walls etc incl taking down the old DBs incl taking down old unserviceable.

S & F By Flushing to walls MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down the old DBs etc.

Distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge. (Note: MCB's and MCCB will be measured and paid seperately under relevent items)

S&F MCB SP 6 to 32 Amps, 240 Volts complete incl taking down old unserviceable.

S&F MCB SPN upto 32 Amps, 240 Volts complete incl taking down old unserviceable.

S & F 9 watt LED Warm/White wall light/ceiling light ,body colour white and black voltage AC85-240 50 Hz Model No -LX135WL/9W incl taking down old unserviceable.

S&F MCCB TPN 100 Amps ,415 Volts complete incl taking down old unserviceable.

S&F MCCB TPN 125 Amps ,415 Volts complete incl taking down old unserviceable one.

S & F in replacement MCB SPN 63 Amps, 230 V,AC incl taking down old unserviceable complete all as specified directed by Engr-in-Charge. Make- Legrand/Havells/L&T/Indoasian

S & F in replacement TPN 63 Amps 415 Volts incl taking down old unserviceable complete all as specified directed by Engr-in-Charge.

M & L in replacement of condenser 2.5 mfd, 250 V incl taking down old unserviceable one and connecting complete all as specified directed by Engr-in-Charge.

All as per Srl No 51 above, but 4 mfd incl taking down old unserviceable one.

All as per Srl No 51 above, but 3.5 mfd incl taking down old unserviceable one.

M & L for industrial type metal socket enclosure with 240 volt MCB 20 Amps, with metal plug top complete all as specified incl taking down old unserviceable one.

S & F of 10 Watt energy efficient wall mouted LED Bulk head luminaire made off die cast aluminium with opal diffuser IP 65 incl taking down old unserviceable one.

Hanging only ceiling fans in repairs any size, any make, and necessary connection as directed by Engineer-In-Charge.

Hanging only Exhaust fans in repairs any size, any make, and necessary connection as directed by Engineer-In-Charge.

S & F in repair 20 Watt LED post top lantern with die cast aluminium spigot, spun aluminium power coated top cover Aluminium PDC heat sink , opal PC diffuser and clear acryylic IP65 Completre all as specified

S & F in repair 36 watts recess /pendant mounting ultraslim LED flat panel 2' X 2' made of extruded aluminium frame with high LEDs & glare free opal diffuser IP20 In warm white/ cool day light/ natural light complete all as specfied

S & F round sheet for blank area 2.5 " dia and 3 " complete all as specified and as directed.

S&F Hylam sheet 4X4 inches complete all as specified and as directed

S&F Hylam sheet 4X7 inches complete all as specified and as directed

S&F Hylam sheet 8X10nches complete all as specified and as directed

S&F flexible pipe white colour dia 3/4" and 1'' complete all as specified and as directed.

S & F PVC Gang box two way or one way for shifting of 5A/15 Amps switch & socket etc

M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4mm dia wire by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

S & F LED flame proof batten suitable for single and twin T8 tube of 16/20 Watt complete all as specified directed by Engr-in-Charge.

S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed by Engr-in-Chrge.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250 V, 2p+earth complete all as directed by Engr-in-Charge.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250 V, 2p+earth complete all as directed by Engr-in-Charge.

S&F flame proof Regulator for Ceiling fan SP 230V, completes including all connected accessories all as directed and specified

Taking out unserviceable service wire and S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor seved with inner sheathing of PVC sheathed in service connections twin core cable flat of size 10 Sqmm all as specified and directed by Engr in charge

Taking out unserviceable service wire and S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor seved with inner sheathing of PVC sheathed in service connections twin core cable flat of size 16 Sqmm all as specified and directed by Engr in charge

S & F wall mounted warm/white decorative light 15 watts vega round complete all as specified directed by Engr-in-Charge.

S & F 12 way modular box complete all as specified and as directed

S & F 8 way modular box complete all as specified and as directed

S & F 6 way modular box complete all as specified and as directed

S & F 4 way modular box complete all as specified and as directed

S & F 3 way modular box complete all as specified and as directed

Taking down carefully UNSV exhaust fan any size and any company including accesseries and ceiling fan any size any make complete materials to store for keeping in safe custody in store keeper at E/M store yard.

S & F ceiling fans complete with aluminium blades, down rods, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)as specified, complete all as specified and directed by Engr-in-charge.

M & L for rewinding of ceiling fans 1200/1400mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed for :- Note :-(1) Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

M & L for rewinding of Exhaust fans 200 to 400mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed for :- Note :-(1) Exhaust Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

Supply and replacement of PVC canopies of suitable size for ceiling fan of any make/model(set of two) with screws complete all as specified and directed

Supply only U clamps with rubber reel and nuts/bolts of suitable size with pins complete all as specified and directed

Supply and replacement of down rods upto 60 cm long heavy duty of any size with gudgeon pins complete.

Supply only fan blade assy suitable for 1200mm sweep ceiling fan (set of three) of any model/make complete.

Supply only fan blade assy suitable for 1400mm sweep ceiling fan (set of three) of any model/make complete.

Supply and replacement of fan blade assy suitable for 300mm sweep exhaust fan (set of three) of any model/make complete.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area but size of cable 16 Sqmm 4 Core complete all as specified and directed

dito as per item No 90 but size of cable 16 Sqmm 2 Core complete all as specified and directed

Supply only 12 watts LED Bulb 240 volts 50 Hz complete all as specified and directed .

S & F galvanised/aluminium metal sheet frame Exhaust fan flappe shutter outdoor type of size 20x20 inches it has no chance for rusting during rain incl nut, bolts, screw etc flappe are fitted at any height/floor of buildings complete all as specified directed by Engr-in-Charge.

S&F Wall mounted fan complete with blades, hanging accessories, Pull chain control and accessories,1350rpm, 230V, 400mm size sweep Min Air delivery 72CMM air delivery complete all as specified and directed.

S&F 12 watts Emergency Bulb Back up 4 hrs cool day light/warm white complete all as specified and directed

S&F 20 watts Emergency LED Tube Lights Back up 4 hrs cool day light/warm white complete all as specified and directed.

Taking down the defective ceiling fan BLDC /Normal of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete. (b) M& L for opening, cleaning, drying and re-winding or BLDC Circuit plate the burnt/short circuited PCB or winding with same guage supper enameled copper wire to maintain speed at load. (c) M&L for preparing surface scrabing, finishing and Painting of ceiling fan by applying one coats of synthetic enamel paint after preparation of surface complete. (d) Replacement of ball bearing suitable for ceiling fans existing sweep & Make/Model

M & L for servicing solar FP collector by removing the flange plates, cleaning the collectors internally by using Descalo solution, removing the blockages in the collectors and refixing the flange plates, testing for satisfactory function all as specified and directed. Solar Make : Kotak, inter Solar

Material and labour for servicing solar manifold and tank by removing all the tubes in the monifold, cleaning the tubes internally, removing the blockages in the tubes and cleaning the tank and removing all the impurities, assembling and testing for satisfactory funtion complete all as specified and directed by Engr-in-Charge. Solar Make : Kotak, inter Solar)

S & F in repairs heating element 25mm to 32mm dia, ISI marked for solar water heating plant of capacity 3KW complete all as specified and directed by Engr in charge. Make : Kotak, inter Solar

S & F flange plates of size 25 mm dia suitable for flat plate collectors incuding taking down old unseviceable flange plate complete all specified and directed by Engr-in-Charge. Make : Kotak, Inter Solar

S & F in repairs thermostat for solar water heating plant suitable size and ratings etc complete all as specified and directed by Engr-in-Charge. Solar Make : Kotak, inter Solar

S & F in repairs flexible heat resistance rubber pipe (from inter connect plate collector to hot water tank) of size 25 mm to 32 mm dia etc with fixing clamp etc complete all as specified. Solar Make : Kotak,Inter Solar

Taking down the Solar water heater collector from its position, removing the top glass of collector and carry out welding/brazing work to the collector and arresting the leakages in the collector, refixing top glass back, testing for satisfactory function including servicing, descaling etc complete all as specified and directed by Engr-in-Charge. Make : Kotak, Inter Solar

Repair, maintenance and servicing of storage type electric water heater (geyser) of capacity 25 to 50 litres comprising of the following tasks at different locations including taking down, transportation to work shop, opening the geyser, replacement of defective spares and reinstalling the same including testing as directed by Engineer-in-charge. Make : Bajaj, Ditz, Primer, Galco, Racold, Havells, Jaguar ,Venus

Note for item 100 to 105 :- (a) Inspection of geysers includes taking down, transporting to works shop for repair, (dismantling) opening descaling, brushing cleaning of storage tank (b) Check and correct earth continuity of electrical items (c) Replacement of neon lamp / indicator lamp if defective. (d) Inspect over flow/vent pipes and remove blockage/ obstructions if any. (e) Examine water tightness tank after cleaning and necessary measures to make the same water tight if not. (f) Check thermostat for its proper functioning (g) Visual examination of fusible plug to ensure its intactness. (h) Checking of dead weight type high pressure release valve ( PRV ) by removing dead weight protection cleaning the seat and ensuring that the vent hole is not blocked / chocked. j) Descalling of the immersion type heating element and cleaning with diluted hydrochloric acid and refixing. k) Checking and adjustments of pressure reducing valves, carrying out operation of all stop cocks & ensure free movement of all working parts. l) Replacement of the rubber / PVC gasket to ensure water tightness m) Testing of Geysers after repairs n) Replacement of defective components such as thermostat safety valves fusible plug, Heating elements, storage tank apparatus plate etc. Note:- Spaire components will be measured and paid separately as supply only under relevent item of Sch 'A'. These parts shall be of the same make of which the geyser is in repair. o) Replacement of plug and top to refixing with new.

Supply only Heating element with rubber washer ('O' ring) cap 1.5KW/2 KW, trangular/round any type of geyser and any make of geyser complete all as specified and as directed.

Supply only indicator bulb neon round / square type single phase 230 Volt complete all as specified and as directed. Make: Legrand/Schenieder/Havells/Bajaj

Supply only Safety plug 15mm ( brass ) for geyser cap 25/50 Ltr complete all as specified and as directed. Make: As per recommendation of manufacturer's of Geyers of approved makes

Supply only Thermostat 30°C to 70°C, 230 Volts complete all as specified and as directed. Make- Bajaj / Theetta / Micron / DasPass

M & L to repair the leakge of copper/steel inner tank of geysers of any capacity by gas welding/brazing for water tightness complete and test under pressure.

S & F gasket rubber ring for heater plate of any size geyser complete all as specified directed by Engr-in-Charge.

Supply only non return valve (NRV) brass of 15mm bore, after dismantling old unserviceable NRV of any size all as specified and directed.

Taking down loose geysers of any capacity from wall & shifting to new place within 1 to 1.5m distance (available in same location) , refixing the geysers complete with fastners and grouting of bolts & all necessary pipe connections and making good the disturbed wall surfaces all as directed. Note :- GI tubing if required shall be measured and paid separately.

S & F removing old u/s geyser deposit to MES store ,also taken geyser MES store and fitting geyser same location. Note : MES only given geyser

S & F PVC connection 450 mm long complete with brass nut, washers, seals, etc suitable for hot & cold water fixed in repairs complete all as specified and as directed. Make: Theetta / Micron / DasPass / Bajaj

S & F PVC connection 600 mm long complete with brass nut, washers, seals, etc suitable for hot & cold water fixed in repairs complete all as specified and as directed. Make: Theetta / Micron / DasPass / Bajaj

S & F Multi core round PVC insulated copper conductor PVC sheathed cable, 1100 Volts grade cable 3 core 2.5 Sqmm complete all as specified and as directed. Make: Plaza/Havells/Polycab/Anchor

S & F switch socket combination but 15A/16A, 5 in 1 flush type universal with fuse & neon incator including taking down old u/s socket outlet of any type complete all as specified and as directed.

Bib taps, 15mm dia fancy type, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass furrule and fixed in repairs complete all as specified and as directed. Make: Parko/Seico/ESS ESS/Cera

S & F in repairs for stop valve/angle valve cast copper alloy, screw down high pressure, crutch handle screwed both end for iron pipe, fancy type, chromium plated for 15mm bore pipe.

Taking up or down steel tubing 15mm bore dia and connection, including for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

M&L for 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors/trenches complete including taking up or down old GI tubing all as specified.

Supply only geyser water (inlet/outlet) assembly brass for geyser cap 25 Ltr of any type and any make of Geyser complete all as specified directed by Engr-in-Charge. make :- Super hot, Racold, Bathwell, Ditz, Kumar, Pearl, Classic, Pieco)

Supply only geyser water (inlet/outlet) assembly brass for geyser cap 50 Ltr of any type and any make Geyser complete all as specified directed by Engr-in-Charge. make :- Super hot, Racold, Bathwell, Ditz, Kumar, Pearl, Classic, Pieco)

Supply only top/bottom plate of size suitable for 25 litres capacity geyser with new machine screws complete all as specified and as directed. Make: As per recommendation of manufacturer's of Geyers of approved makes

Supply only top/bottom plate of size suitable for 50 litres capacity geyseras per existing type and make with new machine screws complete all as specified and as directed

Supply only Copper tube heavy duty 1/2" dia complete all as specified and as directed. Make: As per recommendation of manufacturer's of Geyers of approved makes

Supply only Copper tube heavy duty 3/8" dia complete all as specified and as directed. Make: As per recommendation of manufacturer's of Geyers of approved makes

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

M&L for painting of geyser and also written MES No on geyser complete all as specified and directed by Engineer-in-Charge.

Supply only 15/20Amp pulg top three pin type with 240 volts, 50Hz complete all as specified directed by Engr-in-Charge.

M&L for checking ceiling fan with use of ladder and testing of fan hook, rubbers, bushes, bolts, nuts, washers and split pins and replace wherever required. It is the responsibility of the contractor to get the signature of User from each Quarter after checking of fan complete all as specified. NOTE: (i) Provn of ladder, nut bolts washer, splits pins Etc are deemed to be included in the Quoted rates. (ii) Separate manpower should be provided for this Job.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Pyramid constructions (BID ID -3512401)

M/S SALARIA ASSOCIATES (BID ID -3512604)

M/s J.S Enterprises (BID ID -3507144)