Establishing 2x12.5MVA, 66/11kV Sub-station at Paduvalahippe village along with construction of 66kV LILO line on 110kV DC towers using coyote conductor for a distance of 1.520Km

Substation Portion

Nitrogen Injection fire extinguishing system-supply, erection & commissioning works etc., as per technical specification for 12.5MVA Power Transformers

CIRCUIT BREAKER :

SF-6 Circuit Breaker with semi-pneumatic/pneumatic operated/ spring type operating mechanism, including mounting structures arrangements with rigid, bi-metallic terminal connectors c...

ISOLATORS : 66kV, 1250 A, 40kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. pipe conductor, marsh...

ii)Upright mounting type without Earth switch. LPH 6350mm.

11kV Isolators:

11kV isolator, Double break 400 A, 25KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR conductor.(Capacitor Bank)

11kV Isolators:

11kV isolator, Single break 400 A, 25KA capacity with Roaster Switch with bi-metallic terminal connector suitable for coyote ACSR Conductor.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for or Drake ACSR conductor as per tec...

ii)66kV class, 40 KA, CT of ratio 200-100 / 1-1-1A for Transformer.

Core-1: Vk-800V at 200A, Rct 2ohm at 200/1A, Accuracy class PS- Dist/Dif

Core-2: For metering : Accuracy 0.2s, Burden 10 VA

11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as ...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for 63mm Al tube with marshalling box etc., complete as per tech...

SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

i) 60 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Medium

iii)9kV, 10KA class station class with connector and clamp

Capacitor Bank:

Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable ...

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per

technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...

ii)For 66 kV Transmission line

iii)For 66kV Transmission Line for overhead line (less than 5Km)

(From hangarahally S/s to proposed Paduvalahippe S/s)

Total Weight of Fabrication, galvanising and supply of Mild Steel of Station structures and Mounting Structures.

Note :- Rate to be quoted on per tonne basis

Total Weight of supply of Bolts & nuts of of Station structures , Mounting Structures , Lightning Mast & street lighting.

Note :- Rate to be quoted on per tonne basis

C) 11kV ODS and take off structure :

Supplying of Double pole structure with 9.5 Mts. RCC poles,300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixi...

BUS BAR FORMATION :

(i)Drake ACSR-66kV side

Rigid Bus with Taps & Clamps :

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter

b) 63mm size connecting isolator to vertical tap

ii)Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.

iii) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core insulator type - 66kV side

b) Expansion Type

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV

v) End Cap suitable for 63mm Al.tube.

i) Post insulators- Cylindrical solid core as per technical Specification

Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.

1.C Type wedge connector suitable for Drake-Coyote

2.Post insulator clamp suitable for Drake ACSR and 66kV solid core Insulator

Auxiliary Transformer:

Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....

Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...

A) LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,

+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos. 3 ...

B) A.C. Distribution Box (Outdoor) :

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A...

LT Power Cable:1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules :

a) 1.1 kV PVC Insulated 4X95 sq.mm Aluminium cable 4 core with glands / lugs / ferrules

b) 1.1 kV PVC Insulated 4X25 sq.mm Aluminium cable 4 core with glands / lugs / ferrules

c) 1.1 kV PVC Insulated 4X10sq.mm Aluminium cable 4 core with glands / lugs / ferrules

STATION BATTERY:

110V, 200AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification

BATTERY CHARGER :

Battery charger suitable for 110V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery charger as per technical specification.

DC Distribution Panel (Indoor) as per technical

specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete

Copper control cables:

1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per specificaions

i) 19 Core x 2.5 Sq.mm.

ii)10 Core x 2.5 Sq.mm.

iii) 4 Core x 6.0 Sq.mm.

iv) 4 Core x 2.5 Sq.mm.

v) 2 Core x 2.5 Sq.mm.

vi) 2 Core x 6 Sq.mm.

(Yard Lighting-960Mtr)(Station-1000Mtr)

11kV, XLPE Insulated UG Cable as per Technical Specification

a) 11kV Single Core, 1000 sq.mm Aluminium cable To be run from 66/11 kV transformers to 11kV switchgear).

b) 3X240 sq.mm Aluminium cable (To be run from 11 kV switchgear to 11kV take off DP structure)

c)3X95 Sq.mm Aluminium Cable( To be Run from 11kV Switchgear to Auxiliary Transformer)

d)ia Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.

d)ib)Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.

d)iia) Cable Termination kits suitable for 240Sq. mm 3 Core as per techincal specification.

d) iib) Cable Termination kits suitable for 240Sq. mm 3 Core as per techincal specification.

e)iiia) Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.

d) iiib)Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.

Equipments required for establing SCADA Communication as per KPTCL Specification

Note:1. Satellite communication required will be arranged by SLDC

a. Remote Terminal Unit (RTU) 64 (I/O) Port

b.Data Concentrator Unit (DCU)

c.2kVA online UPS (230V AC 1 phase 50Hz)

i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core

ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core

iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core

iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core

v)supply cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specfications.

vi) supply cables-1C x 32 Sq mm multistrand for battery conforming to KPTCL specification

Fire Fighting Equipments with necessary Mounting Stands

a. i. Mechanical Foam type extinguisher 50 Ltr. capacity

ii. Mechanical Foam type extinguisher 9 Ltr. capacity

b. Water type (gas pressure type) 9 Ltr. capacity

c. Carbon di-oxide type 4.5 kg Capacity

d.i Sand type G.I Buckets 15 Ltr. Capacity

ii. Steel stands for above to have 4 buckets to each stand.

MAINTENANCE TOOLS AND PLANTS

1.Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

2. Telescopic ladder Aluminium 6 Mtr. Height

3.Ring spanner set- 12Nos per Set

4.Tube spanner set- 12Nos per Set

5. Pipe wrench 24 inch

6. Pipe wrench 18 inch.

7. Hydraulic Crimping tools up to 1000 sqmm

8.Rubber hand gloves (15 kV tested)

9.Rechargeable 5W LED Hand Torch

10.Insulated cutting plier

i. 12 inch size

11.Insulated cutting plier

ii. 8 inch size

12.Line live tester

13.Screw driver 18 inches size

14.Screw driver 12 inches size

15. Hammer 8 lbs

16. Hammer 2 lbs

17. Chain pulley block 5 ton capacity

18.Hydraulic jack 5T capacity

19.Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.

21. Box spanners- 12Nos per Set

22.Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

23.Insulation Tester Digital Type (megger) 2.5kV - 5 kV

24.Insulation megger 500 V rating

25.SF-6 Gas leak detector

26.Multimeter electromechanical type

27.Multimeter Electronic type

29.DC Voltmeter range -5V to + 5V

30.Hydrometer syring suitable for vent holes

31.Specific gravity correction chart

32.wall mounting type holder for Hydrometer

33.Thermometer with wall mounting holder

34.Rubber appron

36.Protective goggle

37.Acid resisting jars (4 pint capacity)

38. Rubber shoes knee height

39. Glass funnel

40. Grounding sticks extendable upto 18 ft : 3 nos. of

each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)

Miscellaneous items like rubber mats, first aid box, danger board, shock treatment charts, water filter door locks, fixograph, Sub station name board and other sundry items (size/capacities to be got ...

2.First aid box.

3.Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

4. Water filter / Water purifier : Wall mounting type (Aqua-guard type).

5. Sub-station name board duly painted as per specification including erection & Civil Works

6. Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

7.Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)

8. Danger board ( prohibited ) with support structure including fixing in front of the gate

9. Equipments name plates and earthing name plates including fixing at outdoor yard

Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :

1.Steel Almirahs 6 1/2 feet

2.Steel Almirahs 6 1/2 feet with glass panel doors.

3.Officer's tables

4.Steel slotted angle rack (big)

5.Steel slotted angle rack (small)

6.Steel dust bins

7.Executive Revolving chairs

8.S type arm chairs

9.Steel folding chairs

Station yard lighting (outdoor):

i)Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProo...

ii)Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

Line Supply Portion

Grand Total weight of Tower parts- Mild Steel

Note:Rate to be quoted on per tonne Basis

Grand Total weight of Bolts,Nuts& Washers

Note:Rate to be quoted on per tonne Basis

Tower accessories :

Phase plate (Set of 3 No.)

Earth bond 450 mm long

Conductor and Ground wire:

Coyote ACSR (In plain terrain)

Ground wire 7/3.15mm Plain Terrian

Insulator Strings with Arcing Horns for Coyote Conductor:66kV line

NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insulator strings shall be of Disc Insul...

INSULATOR STRINGS :66kV lines:as per Technical specification

B.Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1X4nos. of 90kN Disc insulators

Insulator Hardware:

A.Single Tension Clamp with hardware and arcing horn suitable for Coyote ACSR

B.Double Tension clamp with hard ware and arcing horn suitable for Coyote ACSR

C. Single suspension Clamp with hardware and arcing horn suitable for Coyote ACSR

Accessories for Coyote ACSR Conductor :

MSC Joints suitable for Coyote ACSR

Repair sleeves suitable for Coyote ACSR

P G Clamps suitable for Coyote ACSR

Vibration dampers for Coyote ACSR

Hardware for Earthwire :

MSC Joints suitable for Ground conductor

Repair sleeves suitable for Ground conductor

Single Tension clamps ( bolted type) suitable for Ground conductor

P G Clamps suitable for Ground conductor

Single Suspension clamps ( bolted type) suitable for Ground conductor

Mandatory Spares portion

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB

SF6 Gas (40% of total gas Qty. of each Sub-Station) Sub-Station

Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)

Terminal Connector (For one Complete Isolator for 72.5KV Class)

Terminal Pad (For one Complete Isolator for 72.5KV Class)

Station Erection Portion

Power Transformer:

12.5MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical...

CIRCUIT BREAKER :

SF-6 Circuit Breaker with semi-pneumatic/pneumatic operated/ spring type operating mechanism, including mounting structures arrangements with rigid, bi-metallic terminal connectors c...

ISOLATORS : 66kV, 1250 A, 40kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. pipe conductor, marsh...

11 kV Isolators:

1) 11 kV isolator, Single break 400 A, 25 KA capacity with Roaster Switch with bi-metallic terminal connector suitable for coyote ACSR.

2) 11 kV isolator, Double break 400 A, 25 KA ca...

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for or Drake ACSR conductor as per tec...

11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as p...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for 63mm Al tube with marshalling box etc., complete as per tech...

Erection of SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

i) 60 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Me...

iii)9kV, 10KA class

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per

technical specification for Transformer & Line- Total

For splitup refer techncocommercial sheet

Erection of Station structures , Mounting Structures , Tubular Type Lightning Mast & Station Yard Light Structure (including Bolts & nuts)-Total Weight

Note:Rate to be quoted on per t Basis.

C) 11 kV ODS and take off structure :

Erection of Double pole structure with 9.5Mts. RCC poles,300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixin...

Formation of Main/ Cross Bus with Single Drake conductor for 66 kV Bay

Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc.,

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge.-Total.

For splitup refer techncocommercial sheet.

i) Post insulators- Cylindrical solid core as per technical Specification

Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.

Auxiliary Transformer:

Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%.

Double Pole Structure along with 9 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 5kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt & nu...

A) LTAC Panel (Indoor), 415 V as per technical

specification comprising of voltmeter and ammeter,

1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,

+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G

SFU, 6 nos. 3...

B) A.C. Distribution Box (Outdoor) :

AC Distribution Box Single front (Outdoor type)

6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G

MCB 16A + 1 O/G of 100A...

STATION BATTERY:

110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per specification

BATTERY CHARGER :

Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery chargeras per specification.

DC Distribution Panel (Indoor) as per technical

specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete

Laying of 1.1 kV Class Armoured Aluminium Cable,Coper Control Cable along with glands/lugs/ferrules .

For splitup refer techncocommercial sheet.

Laying of Scada Cable along with glands/lugs/ferrules

For splitup refer techncocommercial sheet.

11kV Switchgear:11kV, 25KA, 500 MVA MCVCB switchgear 1600 A for incomer and 1250 A for feeders Out door type comprising of 2IC+8F+1BC+2CB+1AP (Remote annunciation cum Control panel) with CTs & PTs...

Laying of 11kV UG Cables-Total

For splitup refer techncocommercial sheet.

Fixing of Termination kit/Pothead for 95Sq. mm 3 Core & 240Sq. mm 3 Core Cable- Total

For splitup refer techncocommercial sheet.

Fixing of Termination kit/Pothead for Single Core 1000 Sqmm Core Cable- Total For splitup refer techncocommercial sheet.

Equipments required for establing SCADA Communication as per KPTCL Specification

Note: Satellite communication required will be arranged by SLDC

a. Site survey, wiring, installation,

testing and commi...

b. Site survey, wiring, installation,

testing and commissioning of

DCU (DCU installation to be

done in RTU panel)

c.Wiring, Installation Testing and commissioning of UPS with batteries & cables

Integration of RTU, DCU and UPS with field equipments

Earth mat formation:

Supplying, Laying and welding of M.S.Flats 75X12 mm, applying ACB paint to welded portion and covering with earth.

Supplying and Grounding of Equipment with G.I.Flat 75X12mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of h...

Supplying and Providing 40mm dia M.S.Rod 1.075m long earthmat spikes including heating, bending top 50/75mm overlap flattening and making spike edge at one end driving into the earth below the ground...

Supply and erection of Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pip...

Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits

including all lead and lifts etc.

Line Erection Portion

Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route

duly following the route alignment, GPS Co-ordinates, submission of detailed line sche...

Conducting drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements ofvertical, horizontal & ground clearances of...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor

Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent...

b. Earth wire-7/3.15mm

Erection of Transmision Line Towers (including tower accessories,etc., except GI angle with Barbed wire & Grounding materials)

(i)The Bidders are required to quote the rates taking in to conside...

Tower accessories:

a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to ...

Supplying and fixing Barbed wire as per Specification

c.Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metrelong, salt, charcoal, including

excavation cha...

Dismantling of existing super structure/tower materials and despatching to the nearest MW stores (for LINES)-( 66 kV DC Conventional tower without stub)-

1)The rates quoted for releasing shall a...

Releasing & Restringing of Existing Coyote ACSR Conductor

Releasing & Restringing of Existing Ground Wire

Station Civil Portion

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

Providing 15 cement plaster on rough side of single or half with cement mortor 1:4 to brick masonary including rounding off corners wherever required smooth rendering, providing and removing scaffold...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...

Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one en...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.100 A.

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution).100 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection o Ov...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Supplying, fixing and wiring Residual current circuit breaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.4...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint....

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply.400 mm Sweep

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Extra length of GI pipe of class B 19mm dia for down rod.

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm copper strip

Supplying and fixing/replacement of Round/ Conical/ Diamond shaped HDPE Doom suitable for 125/160W post top lamp fittings.

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Line Civil Portion

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...