Construction of Miyan Hira Singh Co-operative Training Centre Panjawar Tehsil Haroli, Distt. Una (HP) (SH- Providing E.I. therein)

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plate, suitable GI box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make: Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena & WIres Make: Finolex/KEI/Anchor/Polycab/ Plaza make)

Group C.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Make: Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena & WIres Make: Finolex/KEI/Anchor/Polycab/ Plaza make)

Group C.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:- Finolex/ KEI/Anchor/Polycab/ Plaza.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:- Finolex/KEI/Anchor/Polycab/ Plaza.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:- Finolex/KEI/Anchor/Polycab/ Plaza.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make:- Finolex/KEI/Anchor/Polycab/ Plaza.

2x2.5 Sq. mm. + 1x2.5 Sq. mm.

2x6 Sq. mm. + 1x6 Sq. mm.

2x10 Sq. mm. + 1x6 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make:-Finolex/KEI/Anchor/Polycab/ Plaza.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. Make:- Finolex/KEI/Anchor/Polycab/ Plaza.

3x1.5 Sq. mm.

3x2.5 Sq. mm.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting with complete finish etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection painting with complete finish etc. as required. Make: Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena.

Supplying and fixing 5/6 amp Modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena

Supplying and fixing 3 pin 5/6 amp socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make:- Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required for geyser, A.C. etc. Make:- Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required. Make:- SSK/Anchor after approval from Engineer-in-Charge)

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame 40X40X5MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 250 A TPN Copper/Aluminium Busbar ( Horizental) & Earth strip throughout the length of Panel (current density of Copper/Aluminum Busbar shall be 1mmx1mm=1.0 Amp.) Copper/Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 1850X W-1100 X D-400 MM. Assembly Charges of Aluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comform to IEC 61439 (Part 1&2)(Make: EVA/KSB/Supertech/Hark Power or as approved from Engineer in Charge)

MATERIAL:

OUTGOING :

MCCB 63 A 4P 25 kA-03 Nos. with O/L & S/C protection,spreader link 06 Nos, MCCB 125 A 4P 25 kA-01 Nos. with O/L & S/C protection,spreader link 02 Nos,4 Pole Isolator 63 A. Changeover 63 A 4 P with spreader link 2 nos.

All interconnections of fields side are supported by conical, L &T finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A. (Legrand/Hager/ABB/L&T make)

Supplying and erection of following rating, double pole 240 volts, Isolator in the existing MCB DB complete with connections etc. as required. Make:- Legrand/Hager/ABB/L&T.

Double pole. 63 Amps.Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:- Hager/ABB/L&T/Schneider.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required. Make:- Hager/ABB/L&T/Schneider.

Double door-4 way

Double door-12 way

Double door-16 way

Supply,Erection,Installation and commissioning of Uniearth maintenance free chemical earthing system consisting of environment friendly ground enhancing compound 'G.E.C' 50kg or as required at site having anticorrosive and hygroscopic properties to replace excavated soil. It should consist of Uniearth copper bonded electrodes, as per site conditions and soil resistivity at various depth levels and different terrains. The electrodes should have coating of 250 microns of molecularly bonded pure electrolytic copper(99.9%) in 2 meter length,17.2 mm diameter,terminal joint 200X25X6mm Cu Strip with exothermic welds. The electrode should be duly tested and certified by CPRI for 30kA short time current test for 1 sec rms. (Make:- Ashlok/ True Power/Uni earth or its equivalent make as approved from Engineer in Charge )

Chemical Earthing 200X25X6mm Cu Strip with exothermic welds

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and fixing Copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing Copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 4.00 mm dia (8SWG) copper wire on surface or in recess for loop earthing as required.

Supplying and fixing of following sizes of heavy class FRLS PVC conduit having wall thickness 2.0mm along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required.25 mm dia. ( Makes: AKG/ Diplast/ BEC/ Anchor/ Polycab)

Providing and installation of stationary storage type Electric water heater (Geyser) vertical 25 ltrs capacity by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- (Make: Usha SWH Misty/ Bajaj Shield /Racold CDR DLX Plus/ Anchor Rivia Plus/ Crompton Arno Neo)

10 Liter capacity water heater (Cat-A)

25 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of 1200mm BLDC ceiling fan, air delivery 215 m3 /min, minimum speed 330 RPM,including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-(Make: Usha Technix BLDC ISI/ Orient Echotech Prime/ Havells Efficiencia/ Bajaj Energos 26/ Anchor Ecobreez Urban 3 Blades/ Crompton Energion HS Groove Hyperjet only)

Supplying and fixing two module stepped type fan regulator (Socket type) 100 watts on the existing switch box/cover complete making connections etc,as required. Make:- Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena.

Supplying and fixing Fan box of M.S.sheet with iron rod hook 12 mm.in place of junction box complete as required. Make: National/Anchor/ MK

Providing and installation of metal body exhaust fan of following sizes in the existing opening, with minimum Air Delivery 1050 m3/min including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (Usha Aeroclean LD/ Orient Air Flow/ Crompton Drift Air Plus Metal Anti Dust/ Anchor Anmol Deluxe-R/ Havells Ventil Air DS Only)

Exhaust Fan, light duty, 300 mm sweep

Supplying and fixing exhaust fan louver shutter for 300 mm.exhaust fan on the existing wall,painting etc, as required. Make: National/Anchor/ MK

Supplying and laying G.I.pipe of 40 mm. dia (Heavy duty) underground 1.00 mtr.below ground level for laying the wire/cable etc, as required

Supplying and fixing of Hub 8 port on the existing wall/board complete with connections etc, as required.(D-Link /DGS-1008A-Port Desktop make)

Supplying and fixing of Hub 16 port on the existing wall/board complete with connections etc, as required.(D-Link /DGS-1016A-Port Desktop make)

Supplying and drawing of UTP 4-Pair CAT 6 LAN Cable suitable for high-speed data transmission up to 1 Gbps with a transmission frequency of 250 MHz or better, made of 23 AWG solid bare copper conductors with Low Smoke Zero Halogen (LSZH) outer jacket, in existing surface/recessed steel/PVC conduit or PVC trunking, including all necessaryconnections, dressing, and accessories as required to complete the work in all respects..Make:-D-Link/ Lgrand/ Molex/ Panduit/ R&M/ Polycab/ Finolex

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 70 sq. mm (3.5 core) (Make:-KEI/Anchor/L&T/Havells/Plaza )

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 70 sq. mm (3.5 core) (Make:-KEI/Anchor/L&T/Havells/ Plaza)

Supplying and fixing Computer board comprising metal box 200 mmx150 mmx75 mm for 3 nos 5 amp piano type switches and 3 Nos 5 amp sockets, 1 No RJ 45 socket, comprising 3 mm thick phenolic laminated sheet cover for metal box, G.I. metal box 2 module with sheet cover including connections etc as required. (Make:- Legrand Lyncus/ L&T Entice/ Anchor Roma Classic/ Panasonic Akina/ Crabtree Athena.

Supplying and fixing LED 30 Watt Round Ring type decorative suspended fixture having system lumen efficacy 100 lumen/watt housing made up of extruded aluminum powder coated in white (RAL 9003)/Black(RAL9005) with high efficiency,non-yellowing PMMA diffuser having dia of 600 mm having P.F.>0.95 with THD<10%,CRI80,CCT 5700K/4000K.The LED with useful life of 50000 Hrs. atL70 complete with all accessories, connections,with anchor bolts testing and commissioning etc.Including five years warranty as required.Make :-Wipro :-LM23OR421-XX-57WG2./Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Providing and Fixing of IP20 LED fixture of 12 watt +/- 1 W LED Surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. .Including five years warranty as required.Cat No.Makes:- Wipro(LD06-151-XXX-57SMG1)/Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Providing and Fixing of IP20 LED fixture of 15 watt +/- 1 W LED Surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. .Including five years warranty as required. Makes:- Wipro(LD06-171-XXX-57SMG1) /Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Providing and fixing LED Batten Light of IP40 Led fixture 40 W+/- 1W with Surface Mounted 4 Feet with Polycarbonate diffuser with Extruded aluminium housing having minimum system lumen output 1000 lumens and system lumen efficacy of 100 lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. .Including five years warranty as required.Makes:-Wipro LL24-541-XXX-57-XX./Panasonic/Philips/K-lite and to the best satisfication of Engineer-in-Charge.

Providing and fixing of IP65 Bulkhead led fixture 10 W +/- 1 W Wall Mounted with minimum system lumen efficacy of 100 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 .The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K only with CRI of minimum 80.The Input voltage range shall be 140V to 280V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. .Including five years warranty as required. Makes:- Wipro. LW07-141-XXX-57-G1./Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Providing and fixing LED Batten Light of IP20 Led fixture 10 W+/- 1W with Surface Mounted 2 Feet with Polycarbonate diffuser with Extruded aluminium housing having minimum system lumen output 1000 lumens and system lumen efficacy of 100 lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. .Including five years warranty as required.Makes:-Wipro. :-LL-20-111-XXX-65 AL./Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Providing and Fixing of LED fixture 600mmX600mm 36 Watt +/- 1W Recess mounted fixture with HET Plastic diffuser with minimum system lumen efficacy of 100 lm/W with CRCA housing having P.F.>0.95 with THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects..Including five years warranty as required. Makes:- Wipro :-. LM29-451-XXX-57-XX./Panasonic/Philips/K-lite and to the best satisfication of Engineer-in-Charge.

Providing and Fixing of 1200 mm X 300 mm LED fixture 36 W +/- 1W Surface mounted fixture with HET Plastic diffuser with CRCA Powder Coated housing having minimum system lumen efficacy 100lm/W with P.F.>0.95 with THD<10%. The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V , 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects..Including five years warranty as required.Makes:-Wipro:-CRCO18S036HP57./Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Supplying and fixing LED Flood Light 50 Watt (5000 luminous flux), 5700K,30 degree beam angle and it should be compatible with specifications i.e. power factor ≥ 0.95, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz,4 kv built in surge protection IP 66 & 1K-07 of rating. complete with all accessories, connections,with angle iron frame testing and commissioning etc.Including five years warranty as required.Wipro :--LF 30-651-XXX-57-XX./Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Supplying and fixing of IP 20 Smart PIR Occupancy Sensor having 360 degree detection Pattern with maximum detection diameter of 6 meters at maximum height of 2.8 meters having power consumption of 1.8 waqtts with off delay timing of 1-90 minutes. complete with all accessories, connections,with anchor bolts testing and commissioning etc.Including five years warranty as required.Makes:-Wipro :- PIR Occupancy Sensor GLPS01R010HA./Panasonic/Philips/K-lite/Leksa and to the best satisfication of Engineer-in-Charge.

Please Enable Macros to View BoQ information