Supply, installation, of laboratory Furniture along with associated civil interior job for proposed microbiology room in the Malda Regional Laboratory of WBPCB at Vill Abhirampur, P.O Mokdampur, P.S English Bazar, Dist Malda, Pin 732103

Amount

WORKS

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Supply of Mazdoor (Male)

Providing & fixing 10 mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge. 1) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarsesand) LS – 4 sq.m. (CPWD Analysis of rate for Delhi, 2021, Item 11.21, Page 823)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary [Excluding cost of chipping over concrete surface] (i) With 1 : 6 cement mortar (a) 20 mm thick plaster

Dressed wood work in post, plate, battens etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected up to three decimals) Sal : Malayasian

Rendering the surface of walls and ceiling with white cement-based wall putty of approved make and brand (1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (Two Coats)

Applying Acrylic Emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of superintending Engineer: ( Two Coats

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (a) On timber or plastered surface: i) Two coats (with any shade except white)

(b) On steel or other metal surface: ii) Two coats (with any shade except white)

Supplying, fitting and fixing boiling water-resistant ply conforming to IS:303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-charge. excluding the cost of supporting frame work and teak wood batten/Lipping1 In Ground Floor (i) 9 mm

Supplying, fitting and fixing decorative lamination conforming to IS:2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on particle/MDF/Ply Boards with recommended/ approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-charge. The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1 mm

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

i) 110 mm. Dia

B) UPVC Fittings: a) Plain Tee

(i) 110 mm. Dia.

b) Plain Y 110 mm. Dia.

c) Bend 87.5 degree (i) 110 mm. Dia.

d) Shoe (i) 110 mm Dia Item no.

Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar Sanitary plumbing

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia)

iii) 25 mm

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). i) 25 mm dia

ii) 20 mm dia

Wall Facing Working Bench/Table Make: Approved make Model: Customized Technical specification Modular Wall Facing Workbench with 2 base cabinet ( 1 drawer 2 shutter 1 nos. + 2 shutter 1 nos. ) with 1 sink & tap and 1 double tier reagent rack consisting of 2 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 2 mm thick well-polished Jet Black Granite with Edge polished, acid-resistant, alkali-resistant with 1 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRCA Sheet.

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches (Previous estimate rate for Lab furniture in Siliguri Laboratory)

Relicon Technologies (BID ID -6816492)

Orientallabs Retail Services Private LImited (BID ID -6816937)