REPAIR TO DOORS, WINDOWS, VENTILATORS, CURTAIN RODS AND CONNECTED JOINERIES IN OTM ACCN OF DEPOT AREA AT CHHEOKI MIL STN PRAYAGRAJ

Amount

Resecuring without taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Resecuring without taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 2.00 Sqm each complete all as specified and directed.

S&F for Second class hardwood glazed and skeleton door shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F for Second class hardwood Flush shutters 30 mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed

M&L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket locking arrangements as per sample approval by GE. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, including necessary aluminium fittings like aluminium butt hinges(125 mm) 03 Nos, aluminium handle(200mm) 02 Nos, aluminium tower bolts (200 mm)01 No, aluminium door stopper 01 Nos, and key lock complete all as specified and directed. Note:- filling material in door pannel glass/ ACP sheet will be measured and paid seperately in respective items.

S&F in repair for Anodised aluminium work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket locking arrangements as per sample approval by GE. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) the rate of taking down and removing old alumnium scrap of door,/window/ ventilation/ fixed partition to be included.. (ii) Builder's hardware i.e. hinges/tower bolt/ handle will be measured and paid seperately.

S&F in repair 3mm thick Aiuminium composite panel for partition /cladding using aluminium composite panel sheet of 3mm thick( Platinum series of Envitect) over steel frame work,MS Tube (ACP will be fixed over MS tube welded over MS steel framed works) and filling the gaps with silicon,sealant and other material of approved quality etc complete all as specified and directed. Note :- Steel pipe including nuts and bolts will be measured and paid seperately

S&F for steel window/steel ventilator box type factory made, out of MS hollow section 97mmx39mmx1.6mm thick frame with side/top hung shutter ( width of each shutter should not be exc 450 mm ) (glazed & wire gauged shutters) made out of z section using flush butt welding and tennon riveting all as per IS 1038/83,dobby hinges shall be provided to both shutters, locking arrangements as per sample approval by GE,provided with knob ,Zsection handle 100mm size and 150mm long hook & eye welded to frame and shutter four Nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes cutting holes for hold fast complete all as specified and directed. Note: wire mesh and sheet glass shall be measured & paid separtely under respective items..

S&F for 5 mm thick glass for partiton /Door/ window/ ventilator fixed with EPDM rubber/ neoprene gasket in alumnium section and fixed with putty in steel section all complete as per architectural drawings and the complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F for 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed .

S&F for 200 mm long Aluminium anodised barrel tower bolts of extruded section complete all as spesified and directed

S&F for 150 mm long Aluminium anodised barrel tower bolts of extruded section complete all as spesified and directed

S&F for 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as spesified and directed

S&F for 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as spesified and directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F in repair 4mm th Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repair 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed.

S& F in repair for 5 mm thick glass for alumnium partiton /Door/ window/ ventilator fixed with EPDM rubber/ neoprene gasket all complete as per architectural drawings and the complete all as specified and directed.

S&F in repair for Door closer of aluminium ( die cast ) body hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1200 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F in repair of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed.

Running welding in repairs Thickness of metal to be welded n exc 6 mm complete all as specified and directed

S&F for 1.25mm thick Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed.

S&F for 1.25mm thick Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, but gear operated type and including bevel gear box and crank handle complete all as specified and directed.

S&F for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

S&F for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 tubular trusses complete all as specified and directed.

S&F for Framed work of rolled mild steel conforming to Fe 410-W (GdeE- 250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

S&F for Roof trusses(framed) of rolled mild sheel conforming Fe 410-W (GdeE- 250) quality A as a trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F for MS 1.25 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required complete all as specified and directed.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed.

S&F in repair stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw complete all as specified and directed.

Dismantling of asbestos cement (plain corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed

S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Providing & fixing ceiling with mineral fiber 12 mm thick micro tegular edged false ceiling tiles at all height ,False ceiling tiles of size 595x595 mm of approved texture design patterns having moisture content less than 2%, humidity resistance of 99%, as per IS 8225:1987, light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of PVC coated Anodised aluminium snap grid frame work for false ceiling comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling at approprite height from floor using galvanized mild steel wire and L- shape level adjuster of size 85x25x2mm Anodised aluminium perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and complete all as specified and directed by Engineer-in- Charge. Note : (i) Ceiling tiles shall be authorised brand of make as specified in Appendix 'B' to particular. (iv) Work shall be executed by manufacturer's authorised vendor.

S&F for corrogated PVC Wall Lining / cladding consisting of 7 -8 mm thick any colour or pattern inclusive of solvent cement and fixing at site on PVC frame with nails as per specifications and drawing completed all as specified & directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing completed all as specified & directed.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive and parliyament hinge as requred as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid separately under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid separately under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F for auto closing hinges openable at 0 degree for kitchen cabinet shutters.complete as per specifications and complete all as specified and directed by the Engr-in-charge.

S&F for stainless steel (grade S-304) handles 100 mm size for kitchen cabinet shutters, complete as per specifications and complete all as specified and directed by the engineer - in -charge.

S&F for stainless steel (grade S-304) handles 125 mm size for kitchen cabinet shutters, complete as per specifications and complete all as specified and directed by the engineer - in -charge.

S&F for Continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete as per specifications and as directed by the engineer - in -charge.

S&F for 40 mm magnet catcher for Cup Board etc complete as per specifications and as directed by the engineer - in -charge.

S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain complete all as specified and directed.

S&F for Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed.

S&F Stainless Steel bright color decorative corner/end cap or curtain knob for Curtain rod complete all as secified and directed.

S&F in repair for 300mm, ordinary rat tail/ door spring rod pattern springs including roller and roller plate complete all as spesified and directed .

S&F in repair roller blind decorated horizontal type with necessary pulling threads, including powder coated aluminium canopy box and bottom rail along with all arrangement fixed to door, window/ ventilation as per sample approval by GE completed all as specified & directed.

Demolition of cement concrete unreinfoced in ground floor and paving n exc 15 cm thickness ( below or above ground level) and removing the unserviceable materials to a distance n exc 100m complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) Cement concrete in foundations filling , floor and mass concrete for column post etc complete all as specified as directed.

M&L for 75mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring in size of panel 2X2 mtr minimum using with Glass dividing strips,complete all as specified as directed.

M&L for Plastic dividing strips, 1.5mm thick inserted in position,conform to design and 38mm wide complete all as specified and directed.

M&L for PCC 75mm thick type C-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection and floor/sub base etc complete all specified as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar (1:6) including jointing with neat cement slurry mixing pigment to match the colour etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for preparing new plaster surfaces of ceiling and applying two coats of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surface and applying two coat of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for preparing new plaster surfaces of wall and applying two coats of oil bond distemper over and including priming coat of interior primer applied @0.90 litre/10 sqm over minimum 2 mm thick wall care putty in two coat, Each coat should have 1 mm thick complete all as specified and directed.

M&L for preparing new plaster surfaces of Walls and applying two coats of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for complete removing existing treatment on wall surface and applying two coats of oil bond distemper over and including priming coat of interior primer applied @0.90 litre/10 sqm over minimum 2 mm thick wall care putty in two coat, Each coat should have 1 mm thick complete all as specified and directed.

M&L for complete removal of existing treatment on Walls and applying two coat of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&l for Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment on Walls surface of wall and applying two coats of cement base paint over a coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls ( Note wall surface made smooth and application of distemper through Mechanical mean) complete all as specified and directed.

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M&L for preparation of old painted steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red Oxide, zink crome primer complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair CP vitreous china soap dish fancy type complete all as specifed and directed.

S&F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, complete all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square / cirular with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repai Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.

S&F in repair stainless steel handheld Bidet sprayer / jet spray with mounting Bracket and flexible hose, chrominium plated suitable for water cleset including making fixed in position complete all as specified and directed.

S&F in repair single hole brass CP WHB mixer cock 15mm dia complete all as speicifed and directed

S&F in repair CP brass hot and cold mixer with shower ponit including legs non telephonic fixed in wall for bathroom complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including pvc waste pipe, CP waste coupling,bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repai 1mm thick stainless steel kitchen plate rack of size 750x 900mm best quality assembled with brass washer and nut and bolts including hooks (spoon/cup holders) complete all as specified and as approved by GE.

S&F in repai shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed .

S&F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified and directed.

S&F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. but with long body. (Minimum weight 15mm-120gms) complete all as specified and directed.

S&F in repair 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm 110gms) complete all as specified and directed.

S&F in repair 15 mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm 92gms) complete all as specified and directed.

S&F in repair Waste coupling of PTMT 32 mm (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) with waste pipe ,suitable for WHB, kitchen sink complete all as specifed and directed

S&F in repair Waste coupling of PTMT 40 mm (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) with waste pipe ,suitable for WHB, kitchen sink complete all as specifed and directed

S&F in repair Waste coupling of PTMT 32 mm but suitable for urinals, (Minimum weight 32mm-45gms (half or full threaded) with waste piep complete all as specified and directed

S&F in repair 32/40 mm waste pipe suitable for kitchen sink and wash basin complete all as specified and directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F for 110 mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F for 75 mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F for PVC SWR (110) bends any radius comlete all as specified and directed.

S&F for 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches complete all as specified and directed.

S&F 110 mm PVC (SWR) vent cowl Complete all as specified and directed.

M&L for 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed.

S&F for stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complet all as specified and directed.

S&F for stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed.

Dismantling tanks water tank exc 250 but n exc 500 ltr complete all as specified and directed.

S&F for rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and as directed.

S&F in repair Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed.complete all as specified and directed.

S&F in repiar Rotational moulded polyethylene water storage tanks cover (cylindrical vertical with closed top) fixed in position complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 ltrs n. exc 500 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 500 ltrs n. exc 1000 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed.

S&F in repair 600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screws complete all as specified in particular specifications.

S&F in repair grating doom 100/125 mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including trap set complete all as specified and directed.

S&F in repairs Water closet European patern (EWC) and trap incl connection to drain or outgoing pipe & to flush pipe, anti syphonage pipe etc complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repai Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs plastic water closet sheet cover of any color closed pattern with flat bottom and cover and MS chroumium plated or aluminium hinges devices etc complete all as specified and directed.

S&F in repair Vitreous China Urinal, half stall type, white (including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F in repair 900mmx450mm and 10mm thick frosted urinal glass partition bevelled edge fancy type mounted on wall and fixed with fasterners minimum 3 nos on each glass complete all as specified and as directed.

S&F in repair toilet cabinet PVC with mirror and shelves (600x450) etc complete all as specified and directed

S&F in repai CP fancy type toilet paper holder complete all as specified and directed

S&F in repair CP fancy type towel ring complete all as specified and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.16 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:3) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450x 300x7 mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) (1st quality/Premium Quality) complete all as specified and directed.

M&L for double charged Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.32 Sqm but not exceeding 0.72 Sqm each in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 1,32,270.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum

M/S AVANI TRADERS (BID ID -3469200)