SPL REPAIRS TO FLOORING AND ROOF TREATMENT FOR GALLERY, PROVN OF EXTERNAL FINISHES FOR BUILDINGS A TO D AND DE-1 TO DE4, SPL REPAIRS AND INTERNAL FINISHES FOR F BLOCK SAILORS MD ACCN AND ADDN/ ALTN OF WATER POINT, FLUSH TANK AND ASSOCIATED

Amount

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor or removal to store complete all as specified and as directed.

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections of 25mm bore dia of pipe including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 Sqm each complete all as specified and as directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separately) Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to Four storey building.

S&F PVC chhajja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fastener 150mm long with complete set as per sample including demolition of old RCC chhajja complete all as specified and directed by Engr-in-charge and approved by GE.

M&L for expanded metal, cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire or galvanised wire staples complete to existing reinforcement or steel members. (mesh weight not exceeding 4.00 Kg/Sqm) complete all as specified and as directed.

S&F factory made PVC internal door frame of the size 100x45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam sheet, mitred cut at two corners and jointed with 2 nos. of 150mm long brackets of 15mmx 15mm MS tube. The two vertical door profiles are to be reinforced with 40mmx20mm MS tube of 19 gauge throughout the frame. The door frame shall be fixed to the wall using 65/100mm long MS Screws through the frame by using PVC fasteners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. complete as per manufactures specification and directed by Engineer-in-charge

S&F 35mm thick factory made solid PVC Moulded door shutter, consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm(5mmx3) thick 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in different plain and / OR prelam colours on one side after routing the moulded design on flush door & 2mm thick plain and/ OR prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete as per direction of Engineer -in charge, manufacture’s specification and drawing

S&F 30 mm thick factory made solid core with particle board /flush door core PVC Moulded door shutter, lipped with 15mm(5mmx3) thick 30mm width on one style and top rails and 10mm(5mmx2)thick , 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in different plain and / or prelam colours on one side after routing the moulded design on flush door & 2mm thick plain and/ or prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete as per direction of Engineer -in charge, manufacture’s specification and drawing

S&F 35mm thick 2nd class glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a)

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats complete all as specified and as directed.

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook s and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Fe 410-W (Gde-E-250) quality.

M&L for Providing cement concrete type B-1,1:2:4 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 of SSR Part-II, water troughs, green concrete and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F butt hinges100mm medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and as directed.

S&F aluminium handles cast type anodised 150mm ISI Marked complete all as specified and as directed.

S&F aluminium handles cast type anodised 100mm ISI Marked complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section ISI Marked complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F floor door stopper of aluminium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and as directed.

S&F aluminium anodized hasp & staple of 100 mm size safety type complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stain less steel curtain rod 25 mm dia with two nos stainless steel brackets and stainless steel end caps, fixed on wall with nylon sleeves and screws complete all as specified and as directed.

M&L for providing cement concrete type E-2, 1:5:10 (using 40mm graded stone aggregate) as in mass concrete and filling etc complete all as specified and as directed.

M&L for providing 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in sub floor/sub base for laying floor finishes/ tiles etc., complete all as specified and as directed.

M&L for non skid joint free ceramic tiles 7-8 mm thick coloured (square /rectangular) exc 0.11sqm but not exc 0.18 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles (Light Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry and pointed with white or coloured cement laid over and incl 15 mm thick rendering in cement mortar 1:6 complete all as specified.

M&L for Vitrified Ceramic tiles (Light Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces such as skirting and dados etc set and jointed in neat cement slurry and pointed with white or coloured cement laid over and incl 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surfaces such as skirting and dados of size 300x450x7-8 mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement laid over and including 10mm thick rendering of cement mortar 1:4 complete all as specified and as directed.

M&L for 18 mm thick granite (of any type) machine cut as in platforms, stage top, flooring etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

M&L for 18 - 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including one number SS clamps (graded - 202) of flat 30mm x 2mm 150mm long made to shape in each slab with drilling hole for hold fastener and12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding and polishing laid over 10 mm thick rendering in cement mortar 1:4 complete all as specified.

S&F 18-20mm thick machine cut kota stone flooring each slab exc 0.25 and nexc 0.36 sqm including 15 mm thick screed bed 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including rubbing and polishing (granite finish) complete in all respect and all as specified.

Supply and fixed 18-20mm thick machine cut white marble stone in flooring including 20mm thick screed bed 1:4 laid and jointed with white cement slurry mixed with pigment to match the shade of stone slab including rubbing and polishing (granite style) as per sample kept in GE Office complete inall respect and all as specified.

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scaffolding and making arrangements with hessian clothes for protection from falling of concrete & all other safety precautions complete all as specified incl removal of debris outside MOD land complete all as specified and as directed.

M&L for Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and as directed.

M&L for 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

M&L for preparation of new plastered surfaces of wall and applying two coats of weather coat exterior emulsion paint over a coat of primer over and including one coat of wall care putty on walls complete all as directed

M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over and including one coat of putty complete all as specified and as directed.

S&F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as directed by EIC

M&L for 10 mm thick polymer modified plaster in CM (1:4) on fair face of brickwork or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

M&L for Preparation of new plastered or un-plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer and over and including one coat of putty complete all as specified and as directed.

M&L for preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on brickwork/ concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering in cement plaster (1:4) on ceiling on brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and including one coat of putty complete all as specified and as directed.

M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over and including one coat of putty complete all as specified and as directed.

M&L for preparation of old wooden surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L complete removal of existing treatment from old surfaces of ceiling and applying two coats of oil bound distemper on walls over a coat of primer and over and including one coat of putty complete all as specified and as directed.

M&L for complete removal of existing treatment from old surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

Demolition and breaking up drain pipes of 150/100/75 mm (Salt glazed ware, AC / PVC or Reinforced concrete), jointed in cement mortar including all fittings and taking out of trenches, if required

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

M&L for PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, pressure rating 6kg/sqcm complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes with wall thickness exc 5 mm single socketed in any length with rubber ring joints fixed to walls or laid in floors including cutting chases and making good and fixed pressure rating 6kg/sqcm complete all as specified and as directed.

S&F 110 mm PVC (SWR) bends any radius with wall thickness exc 5 mm and fixed complete in all respect as specified.

S&F 110 mm PVC (SWR) bends any radius with wall thickness exc 5 mm with access door and fixed complete all as specified and as directed.

S&F 110 mm PVC (SWR) branch piece single, with wall thickness exc 5 mm equal or unequal any radius including access door and fixed complete all as specified and as directed.

S&F PVC (SWR) floor trap for 100mm diameter of outlet, with wall thickness exc 5 mm with stainless steel grating of 100 mm including jointing with solvent cement complete all as specified and as directed.

S&F 150mm PTMT Bath asset Grating square, hole/without hole, fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and as directed.

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

S&F 25mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

S&F in repair 15mm bore dia Stainless Steel finish copper alloy long nose bib cock quarter turn including wall flange complete all as specified and as directed.

S&F in repairs concealed Stop valves 15mm, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15mm bore dia Stainless Steel finish copper alloy angular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : QQT-7053 or equivalent from makes approved by E-in C and as approved by GE.

S&F in repairs 15mm bore dia Stainless Steel finish 2 way angular stop cock with wall flange quarter turn full Antique including cover plate complete all as specified and as directed.

S&F in repairs chromium plated brass shower rose 125mm with swivel joint and shower Arm complete all as specified and as directed. Make:Jaquar/prayag or equivalent from makes approved by E-in C and as approved by GE..

Taking down push valve of any type any description complete all as specified and as directed.

S&F 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including PVC bend for cistern and connecting to WC and fixing on walls with bracket complete all as specified and as directed.

S&F PVC connection 15 mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete in all respect as specified

Dismantling water tanks exc 250 ltr but n.exc 500 ltr and removal from site.

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site.

S&F 500 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and as directed.

S&F 500 litres capacity polyethylene three layered water storage loft tanks (rectangular or square with closed top) hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and as directed.

S&F 1000 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and as directed.

S&F in repairs ball valve of PVC complete with aluminium rod with polyster ball for 20 mm dia iron pipe complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and any position not otherwise provided for complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F 6.00 mm thick mild steel, plain, black sheet in water tank platform and similar work ,cut to size, holes punched; including welding to steel framing with including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M&L for preparation new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

S&F in repairs 25 mm bore gun metal globe or gate valve, with iron wheel, screwed both ends for iron pipes fixed complete all as specified and as directed.

S&F in repairs 20 mm bore gun metal globe or gate valve, with iron wheel, screwed both ends for iron pipes fixed complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl PVC waste pipe and CP waste fitting, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F in repairs Stain less steel plate rack made of stainless steel 1mm thick, 900mmx 600mm size, complete all as specified and as directed.

S&F in repairs vitreous china white wash hand basin under counter round of size 450mm dia including cutting in granite slab, fixing completely in position complete all as specified and as directed.

S&F in repair 15mm bore dia Stainless steel finish copper alloy pillar tap (swan neck) for wash hand basin with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 32 mm bore PVC waste pipe for WHB complete all as specified and as directed.

S&F Vitreous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repairs brass chromium plated urinal spreader heavy duty suitable for half stall urinal fixed with stainless steel screws in position complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan, pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

Supply only plastic water closet seat cover,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised device suitable for pedestal pattern white complete all as specified and directed

S&F brass chromium plated jet suitable for pedestal pattern water closet along with flexible pipe and fixed with water closet in position with plate and nuts and bolts complete in position all as specified and directed.

S&F in repair Stainless steel finish copper alloy health faucet with 1.20 mtr long flexible pipe 8mm dia and wall hook, fixed complete in position for pedestal pattern WC all as specified and directed by Engr-in-Charge.

M&L in repair for 20mm dia D type, CP finish brass alloy towel rail, 600mm long between flanges fixed in position complete all as specified and as directed.

S&F brass chromium plated soap dish complete in all respect as specified and directed.

S&F powder coated aluminium 3 track bombay sliding window 2 bays made out of hollow extruded aluminum section as mentioned below and glazed with 5 mm thick clear glass and stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed together with aluminium anodised mesh 10x10x1.0mm thick fixed with rubber beading/gasket and aluminium anodised beading all around and lock type handle of size 75mm, provision of rollers with track etc complete all as specified and directed (a) Chowkat/frame - size 63.50mm x 38mm x 1.6mm thick (b) Shutter top and bottom rail - size 37.50 x 15 x 1.00 mm thick (3 set shutter) (c) Shutter inner rail - size 37.50 x 15 x 1.00 mm thick (for 3 set shutter)

S&F powder coated aluminium ventilators chowkhat made out of hollow extruded aluminum section 63.50 x 38.10 x 1.60 mm thick & shutter made of section 47.00 x 44.45 x 1.60 mm thick complete with 2 no 75 mm Aluminum Hinge 2 Nos 150 mm long Aluminum anodised tower bolt & Aluminium stay. One no 100mm Aluminum anodised D type alum Handle and 3 mm thickfrosted glass and stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm including fixed together with aluminium anodised mesh 10x10x1.0mm thick in each shutter of vents. The make of glass Saint Gobain/Atul/Modiguard. The rate incl rubber packing/Aluminum beading around glass complete with rubber packing Gasket & glazing clip.

S&F Aluminium anodised grill made of 6mm dia aluminium bars, size of mesh 100mm by 100mm fixed together with aluminium U channel thick all around the grill complete fixed in position complete all as specified and as directed.

S&F Stainless steel angle made out of 304 grade grade steel and fixed with corner of wall using anchorage clamps and dash fasteners etc as required at site to fix in position complete in all respect as specified & directed

Demolition of brick work or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for Brickwork with sub class 'B' bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for Brickwork with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

Dismantling of brick tiles single layer on roofs complete all as specified and as directed.

Demolition of mud in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.

(a) M&L for cleaning the surface, remove dust dirt, loose particles and unsound substrate and providing 20mm thick cement screed (1:4) mixed with FOSROC/Dr Fixit/Sika Plastocrete Pus liquid or equivalent Water proofing compound 100 gram/Bag over bonding coat of Sika SBR Latex Power or equivalent. (b) APP membrane system 3mm thick plain finish (for accessible roof) Supply and apply a polyester reinforced, APP modified bitumen membrane Sika WP Shield 103P with plain finish to the primed substrate with staggered overlap seams of 75mm (side) and 100mm (end) a thickness 3mm (-0.2 / + 0.3) (EN 1849-1) Weight of the membrane not less than 4 kg/sqm, cold flexibility of - 2 degree Celsius (EN 1109) a tensile strength (long) of 600 N/Sqm (± 20 %) (EN 12311-1) an impact resistance of not less than 600mm (EN 12001) and water tightness not less than 60 kPa (EN 1928 (B)), Primer : Sika WP Shield Primer, Consumption : Primer 0.25 - 0.30 Kg/m 2, The work for water proofing treatment on roofs shall be executed through original manufacturer or their authorised applicator, (c) Seal edges well into grooves & protect with CM 1:2

M&L for precast PCC plain tile 20mm thick, area of each tiles exc 0.02 sqm but n.exc 0.09 sqm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick, laid in sub base complete all as specified and as directed.

M&L for uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg

Removing building materials /old waste unwanted existing material of any description or any type etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork of SSR Part-II) to a distance of 5km or beyond the lead included in the rates, including loading, unloading and stacking at the destination in all respect as specified directed by Engr-in-charge. Note: It is to be ensured that the load of building/ unwanted material shall not be less than 6 cum per load. In case load is less than 6 cum the same shall be measured and paid separately.

S&F mild steel sliding door bolt chromium plated not less than 16 mm dia with hasp, staple (bolt type) and fixing with and including a minimum of 6 nos bolts and nuts, four on bolt plate and two on stalpe plate and fixed, 300 mm length of bolt complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete in all respect as specified and directed

S&F in repairs 15 mm dia brass chromium plated Bib tap fency type chromium plated complete in all respect as specified.

S&F in repairs 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete in all respect as specified.

S&F solid factory made PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing

S&F factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drg.

S&F in repairs ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20mm bore dia and fixed complete all as specified and directed.

M&L for Non skid joint less coloured ceramic tiles 7-8mm thick size 400x400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 and including resin rubber based adhesive as recommended by the manufacturer’s instruction complete .

S&F Powder coated aluminum grill made of 8mm dia aluminium bars, size of mesh 50mm by 50mm fixed together with aluminium angle 40x40x2 mm thick all round the grill complete fixed in position complete all as specified and as directed.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) 110mm bore equal or unequal with access door complete all as specified and as directed.

S&F 18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws as in kitchen cabinet/cupboard complete all as specified and directed.

S&F 100 mm long extruded brass handle, fabricated type polished complete all as speified and directed.

S&F 30 mm width flap (when open) condinuous piano hinges, brass complete all as specified and directed.

S&F magnetic ball catches with ball brass body and striking plate complete all as specified and directed.

S&F single piece china wash down water closet with of soft closed seat cover, hinges accessories set, cistern fittings size 375x650x770 mm. Make : Jaguar SLS-WHT-6751P or equivalent complete all as specified and directed.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L in replacement of point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories, provn of new galvanised MS sunken box and new hylum sheet 3 mm thick of suitable size, ISI marked for housing the switches and sockets, for the following :-MAKE:RR/POLYCAB/HAVELLS

One light/fan/exhaust fan point controlled by one nos, one way switch.

One light point controlled by one nos of two way switch.

One bell / buzzer point controlled by one bell push

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

All as per item No. 139.00 here in before but with 2.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board. MAKE:-ANCHOR/ROMA/INDOASIAN

All as per item No 139.00 above but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable on independent circuit as specified and directed by Engineer-in-Charge MAKE:-ANCHOR/ROMA/INDOASIAN

S & F in replacement of switch, piano type, flush mounted 230/250 volts grade, on top covers (catered in point wiring above) :-MAKE:-ANCHOR/ROMA/INDOASIAN

Single pole, one way piano type, flush mounted switch, 5 Amp rating

S&F bell push 6A with Neon flush type 240 volts all as specified.

Single pole, two way, piano type, flush mounted switch,5 Amp rating

Single pole, one way, piano type, flush mounted switch,15 Amp rating

S & F in replacement of socket outlet, multipurpose type, non-shuttered, non-interlocking, flush mounting type, 230/250 volts grade on top covers (catered in point wiring above) :-MAKE:-ANCHOR/ROMA/INDOASIAN

3 Pin 5 Amp socket outlet (with 2 pin outlet also)

5 Pin 15 Amp & 5 Amp multipurpose socket outlet

S&F plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified. MAKE:HAVELLS/LEGRAND/INDOASIAN

S&F in replacement of ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body ISI Marked.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar.

S&F in replacement of factory made, sheet steel distribution boards, SPN 8 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar. MAKE:LEGRAND/HAVELLS/INDOASIAN

S&F in replacement of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-MAKE:LEGRAND/HAVELLS/INDOASIAN Note : Make of the MCB should be the same as that of DB

MCB SP 6 to 32 Amps

MCB SPN 40-63 Amps

S&F in replacement LED Tube light fitting 10 watt ( 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable all as specified Make: CG Cat Part No LCTL-9-CDL, Havells Cat part No LHEXBLP7UN1W009, Bajaj Cat Part No BCLSB10WH, crompton cat part no-LTT8-8

S&F LED Tube Light of 20Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified. Make-CG cat part no.-LCTL-18-CDL, Bajaj Cat Part No BLRB-DB218 or equivalent in make.

M&L for taking down of ceiling fan of any size and servicing complete, greasing, painting ,changing of ball bearing of any type, Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required MAKE:ANCHOR/ROMA/INDOASIAN

M&L for taking down of exhaust fan of any size and servicing complete, greasing, painting ,changing of ball bearing of any type, Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

S&F in repair electric bell AC 230 Volt comlete all as specified and directed by Engr - in - Charge all as specified. MAKE:ANCHOR/ROMA/INDOASIAN Note for item No 01 to 154 :- The work described in these items may be executed in bldgs upto (G+3 floor) hence the contractor shall make arrangements with hessian clothes for protection from falling of concrete & all other safetey precautions and the rates are deemed to be included in the quoted unit rates.

sony engineering works

M/s Shivam Furnishers

BEHAL TRADERS

MRITUNJYA ASSOCIATES