PERIODICAL SERVICES COMPREHENSIVE MAINT AND REPAIR REPL OF JOINERY FLOORING ROOF SHEETS AND OTHER MISC BR WORKS AT DOMESTIC AREA AT UNCHIBASSI UNDER GE S PATHANKOT

Amount

Taking down chowkats of frames (without taking down shutter from the frame) not exceeding 1.5 Sqm each and removing from site complete all as specified.

Taking down chowkats of frames (without taking off shutter from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified.

Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each and removing from site complete all as specified.

Factory made 2nd class hard wood 35mm thick glazed and skeleton shutter, open rebated and prepared to receive glass gauge etc, (with sash bars any numbers) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated completed all as specified.

Factory made 35mm thick plain framed panelled shutter (two panel) of second class hard wood rail and style with lock rail and panel of 9mm BWP commercial ply. The size of rail and style as per IS 1003 Part-I kiln seasoned and chemically pressure treated, all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 105x60mm made out of 1.25mm thick MS sheet complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125x60mm made out of 1.25mm thick MS sheet, complete all as specified and directed.

PCC 1:3:6 Type C-1 (using 20mm graded aggregate) as in back filling of pressed steel frames and similar work, complete all as specified and directed.

M&L solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification in SSR Part-I.

Steel windows of Z section with side hung shutters including projecting type hinges with steel handles,2 Nos steel tower bolts 100mm long peg stay complete with glazing bars, devetailed or welded including locking arrangements, complete all as specified and directed.

All as per serial item No.11 above but without glazing bars, complete all as specified and directed.

M&L for Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed.

M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for mild steel framed work such as grills grating etc with ends of bars shouldered and or riveted etc, complete all as specified and directed.

Galvanized mild steel wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

M&L for sheet glass ordinary quality 3mm thick and glazed with oil putty or wooden beads in square n.exc 0.5 Sqm each pane, complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified.

S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long

S & F Aluminium anodized barrel tower bolt of extruded section of size 150mm long.

S&F Aluminum Handle cast type anodized of size 150mm complete all as specified.

S&F floor door stopper of aluminium body two legged 50mm size

Supply only butt hinges, medium weight cold rolled mild steel 100mm size, complete all as specified.

Material & labour for 25mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, including fixing Ist class softwood beading of size 20x20mm over all sides and fixed with screws to frame all as specified and directed.

Supply only butt hinges, medium weight cold rolled mild steel 75mm size, complete all as specified.

Hasp and staple aluminium anodized size 100mm including bolt to hinge plate and fixed with screws

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

S&F mild steel stove enameled helical door spring 150mm size fixed to pressed steel frame/MS frame/wooden chowkhats including necessary welding work etc (if required), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces joint free 300x450x6-7mm th set and jointed in neat cement slurry and pointed in white cement to match, including rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished fair and even to receive tiles as on walls, complete all as specified and directed.

M&L for edge cut joint free glazed/matt finish colored or printed ceramic tile surface area exc 0.11 Sqm and n.exceeding 0.18 Sqm of size 400x400x7 to 8mm thick as in floors set and jointed in neat cement slurry. including screed bed or bedding layer of cement mortar (1:4) 15mm thick, complete all as specified and directed.

All as per serial item No 33 above but as in skirting on 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for PCC (1:2:4) Type B-I, using 20mm graded aggregate as in floor 25mm thick finished even & fair, complete all as specified and directed.

Material and Labour Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors, complete all as specified and directed.

M&L for providing 100mm thick type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base flooring, complete all as specified and directed.

M &L 75mm thick PCC (1:3:6) Type C-1 (using 20mm graded stone aggregate) as in plinth protection/paving finished even & smooth w/o using extra cement, complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer upto any height and removing all unserviceable material from site to outside of Cantt area.

Roughening surfaces of old concrete floor and cleaning of all foreign materials such as fungus, moss, dust etc. by wire brushing and dusting picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm complete.

M&L for screed bed or bedding layer 10mm thick in cement mortar 1:3 mixed with water proofing compound on concrete surface in roof complete all as specified and directed. (Note :- WPC shall be measured separately)

Providing and laying of water proofing treatment of roof APP (Atactic Polypropylene) modified prefabricated five layered 3mm thick water proofing membrane, super thermolay non woven polyester mat reinforcement of 160 gms, weight of membrane @ 3.60 Kg/Sqm over a solvent based bitumen primer, Shalitex Primer @ 0.40 Ltr per Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitumen torch. The end lap should be 150mm and the side lap must be minimum 100 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/up to 500mm, membrane shall be terminated at the top of parapet. All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (NOTE:- The work shall be executed through authorized applicator approved by the manufacturers of membrane). Make:- TEXSA, IWL, STP.

PCC (1:2:4) type B-0 (using 12.50 mm graded crushed stone aggregate) as in roof padding with liquid WPC laid to slopes as directed and approx thickness 75mm or less and finished the surfaces even and smooth without using extra cement complete all as specified and directed.( WPC shall be measured separately)

PCC(1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping benching, path etc

Supply only Liquid Water proofing compound, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness below or above ground level.

Demolition of brick work built in CM including all quoins, pillars etc.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6mm cum radius built in CM (1:6), complete all as specified and directed.

All as per Serial item No 48 above but except bricks.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM (1:4) half brick thick, complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in CM, using extra cement incl forms, moulds etc

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggr) in surface channels and drains incl all necessary form work

M&L for provn of curtain rod MS tube powder coated of 20mm dia of length 1.20 m to 2.20 m each complete including 02 Nos Finials, 03 Nos brackets, 06 Nos screws & fishers complete all as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc.

Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in ceiling complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified

Dismantling wall/ceiling boards (Fibre,Pulp insulation etc) or insulation slabs/blankets any thickness including cover fillets.

S&F GI snap grid frame work (Grid size 60x60cm) for false ceiling with powder coated GI angle of size 25x25mm, main runner 'T' of size 25x40mm secondary runner 'T' size 25x30mm suspended with 3mm GI wire with butterfly clips for levelling complete.

S&F non asbestos 4mm thick E- boards of size 60x60cm laid in GI grid for ceiling fixed in repair.

S&F Vitreous China (flat back or angle back type) wash hand basin, white, flat back, size 550x400mm including brackets any size, PTMT waste coupling 32mm, waste pipe 32mm dia, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed.

Supply & fixing rotational molded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity each triple layered including dismantling / demolition of any type of storage tank.

Supply & fixing rotational molded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 liters capacity each triple layered including dismantling / demolition of any type of storage tank.

S&F PVC low level flushing cistern white 10 ltr capacity with PVC flush complete fixed in repairs.

Preparation of new or untreated wood or wood based surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Preparation of new or untreated steel surface of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

M&L for preparation of new surfaces and applying three coats of white wash on ceiling incl complete removal of existing treatment.

Preparing of new plastered or unplastered surface of wall including and applying two coat of oil bound distemper over a coat of primer on walls as per specified and directed.

Preparing of new plastered or unplastered surface of wall including and applying two coat of cement base paint over a coat of primer on walls as per specified and directed.

Attending complaints related to plumber/water supply and obtaining completion from user. This includes minor repair of taps by replacement of washers, tightening of taps, tightening of check nuts PVC connection, and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC Flushing cistern. Repair/replacement of face mohra etc(Replacement of taps,PVC connection/phase mohra's of any description & any other material will be paid separately as supply only).

Attending complaints related to carpenter work. This includes repair & easing of doors,refixing or retightening of doors, windows, resecuring of door/windows wire gauge etc including nails,screws etc required to make good the work/to attend the complaint (Replacement of Hinges, doors/windows shutters glass panes, wire gauge will be paid separately).

Supply only 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms)

Supply only Bib taps fancy type quarter turn chromium plated with capstan headed, screwed down high pressure for 15mm bore.

Supply only Bib taps std. PTMT any colour, screwed down high pressure for 15mm bore.

Supply only Pillar Taps Cast Copper Alloy quarter turn, fancy type CP screwed down high pressure for 15mm bore.

Supply only Pillar Taps Std. PTMT any colour, screwed down hight pressure for 15mm bore.

S& F CP brass angle cock 15mm dia fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply only Angle/Stop Valve of PTMT any colour screwed down for iron pipe of 15mm bore.

Supply only for cast copper alloy phase mohra for Pillar cock/Bib cock/Stop cock, concealed Stop cock etc

Supply only waste coupling of PTMT (half or full thread) of size 32mm dia, complete all as specified and directed.

Supply & fixing PVC waste pipe for 32mm bore pipe, complete all as specified and directed.

Supply & fixing PVC waste pipe for Urinal 50mm bore pipe, complete all as specified and directed.

Supply only grating square/circular 150mm size of PTMT minimum weight 100gms, complete all as specified and directed.

Supply only PVC connection 15mm bore size 600mm long with PTMT nuts, complete all as specified and directed.

Repairing of PVC Flushing Cistern by changing its internal fitting as required at site , complete all as specified and directed.

Cleaning of Water Storage Tanks of any capacity completely by removing all dirt/dust and other type of waste and including writing of date of cleaning on side of tank with synthetic enamel paint, complete all as specified and directed.

S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

Supply only Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed fancy type for 15mm dia of pipe fixed in repairs complete all as specified

Supply only Brass CP Health faucet for EWC screwed down for iron pipe and fixed fancy type for 15mm dia of pipe fixed in repairs complete all as specified.

Supply only Brass CP Jet spray for EWC screwed down for iron pipe and fixed fancy type for 15mm dia of pipe fixed in repairs complete all as specified.

Repair to steel window / ventilators by using welding equipments and including provision of slot pin, hinge, hook and eye of standard quality where required.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of any dia.

Supply & fixing PVC(SWR) of size 110mm dia pipe of pressure rating 4kg/sqm in any length with rubber ring joints.

Supply & fixing PVC(SWR) of size 75mm dia pipe of pressure rating 4kg/sqm in any length with rubber ring joints.

M&L PVC (SWR) 110 mm bore bends any radius.

M&L PVC (SWR) 75 mm bore bends any radius.

Taking up or down steel tubing and connection and removing to store bore of pipe 15mm dia

Taking up or down steel tubing and connection and removing to store bore of pipe 20mm dia

S&F GI tubes medium grade bore of pipe 15mm fixed to wall of laid in floors etc complete with all fittings

All as per Items No 101 above but fixing only

S&F GI tubes medium grade bore of pipe 20mm fixed to wall of laid in floors etc complete with all fittings

All as per Items No 103 here in before but fixing only

Supply & fixing PVC Seat Cover for EWC Pan (White) of Std. quality as approved by Engr-in-Charge including Mild Steel Chromium Plated Hinging device.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union all as specified.

Supply only 15mm bore, stop valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified.

S&F stainless steel plate rack of size 900x600 mm with stainless steel sheet complete all as specified and directed.

Supply & fixing in repair Chromium plated steel towel rail 60cm long including brackets.

S&F bath cabinet of size 360mmx450mmx90mm deep with glass of size 320mmx450mmx3mm thick.

S&F shelf PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 300gms).

Supply & Fixing sheet glass ordinary quality 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm as in repair including removing of broken glass.

Replacement of missing/broken iron mongrey as mentioned below

Aluminum Sliding door bolt 300mm long

Aluminium handle 100mm

Aluminium die cast body door closer hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width.

Preparing of old plastered or unplastered surface of wall including cornices pilasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot etc and applying one coat of white wash all as specified and directed.

All as per Srl item No 117 above but on ceiling all as specified and directed.

All as per Srl item No 117 above but old surface one coat of oil bound distemper on walls as per specified and directed.

All as per Srl item No 117 above but old surface two coats of oil bound distemper on ceilings as per specified and directed.

M&L for one coat of cement base paint including preparation old surface to match the shade as per colour scheme/pattern all as specified and directed.

M&L for two coats of cement base paint including preparation complete removal of existing treatment of old surface to match the shade as per colour scheme/pattern all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surface of any description not otherwise described over 10cm width of girth incl preparation of old painted surfaces all as specified and directed.

All as per Srl item No 123 above but one coat of synthetic enamel paint on steel surfaces all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc,

M&L rendering 15mm thick on a fair faces of brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement and applying two coats of cement base paint on new surfaces incl preparation of new plastered surface.

Material & labour for 15 mm thick cement plastering in cement mortar (1:6) on fair/ unfair faces of brick work or concrete surfaces finished even and smooth without using extra cement and applying two coat of distemper oil emulsion with priming plastered and other surfaces with chalk whiting on plastered surfaces, preparatory to distempering paint on newly plastered surfaces such as walls/ceiling etc incl preparation of new plastered surface complete all as specified and directed.

-ditto- all as per item No 11 above but on ceiling surface 5mm thick with CM 1:3 incl preparation and applying three coats of white wash on newly plastered surfaces such as walls/ceiling etc complete all as specified and directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high on walls all as specified and directed by Engineer-in-Charge including obliterating old writing of any description with paint to match existing work.

Hacking old broken glass (any thickness size ,quality or description ) from metal frame including punching or drilling out old glazing pin/spring clips ,providing and fixing new glass panes with oil putty complete all as specified .

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in area n.exc 0.5 sqm each pane

All as per Srl Item No 131 above but except glass.

M&L for 3mm thick figured glass, pin headed glass ordinary quality and glazing with oil putty in area n.exc 0.5 sqm each pane

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

M/S SHRI RAM BUILDERS

SATISH AND CO

INDERJIT SINGH

KULBHUSHAN AGGARWAL

Bidder Name

KULBHUSHAN AGGARWAL