SPECIAL REPAIRS TO SERVANT QUARTERS AT GORKHA HILL BLOCK NO 23-26 AT DSSC WELLINGTON

M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 350x250x7mm/ 450 x 350x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and as directed.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Dismantling floor, hearth or wall tiling of any description and any thickness incl cement mortar bedding (but not backing), rubbish off the premises.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate as in floors for levelling course complete all as specified and as directed.

M&L for providing and laying water proofing treatment to sunken floor portion of WC ,Bathroom etc,by applying first layer of slurry of cement @0.488 kg/Sqm mixed with Dr fixit or Equivalent Acrylic based polymer modified cementitious (PMC) composite compound @ 0.253kg/sqm and second layer of slurry of cement 0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg /sqm complete all as specified and as directed.

M & L 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roofcslab/ floor complete all as specified (liquid water proofing compound are measure seperately)

M&L PCC 1:4:8 type D2 with 40mm graded stone aggregate as in sunken floor/toilet floor /kitchen floor / Mahhole concrete finished the surfaces even and fair to receive top layer all as specified and as directed.

M&L cement concrete 40mm thick type B1 1:2:4 using 20mm graded stone aggregate as in flooring with using liquid water proofing of approved make all as specified and as directed.

M&L 100mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in floor concrete finished even and rough to receive the top layer all as specified and as directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise specifically provided etc (below or above ground level)/sunken floors and removing debris off the site complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20-25 mm thick laid over cement screed bed in CM 1:3 20mm mm thick and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of cudappah stone including cutting and polishing complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platforms etc for even and smooth finish complete all as specified

M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate) as in slab supproted on walls, beam and columns in floor, roof/cooking platforms etc complete all as specified and as directed.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

S&F Pressed steel frames of 1mm thick factory made of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed.

S&F Steel windows box type factory made (double leaf, gauge and glazed) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and as directed.

S&F Steel ventilators factory made with top hung shutters including hinges with steel handle and steel peg stay, complete all as specified and as directed.

M&L PCC type B-0 (1:2:4) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed.

Supply and fix factory made 30mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type decorative face on both sides with lipping to match with frame and fitted to chowkats etc., complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed.

S&F 125mm, extruded aluminium alloy handles, fabricated type, anodised complete.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 200 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading s specified and as directed.

S&F 125mm, butt hinges medium weight complete as specified and as directed

S&F sheet glass ordinary quality 4.0 mm thick in square. exc. 0.50 sqm in each pane and glazing with oil putty .

S&F Figured glass, pin headed 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty.

S&F Figured glass, pin headed 4 mm thick in squares exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes.

Taking down door/ window chowkats or frame with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.

Taking down door/window chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 4.00 Sqm each.

S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.

S&F new outlet 75mm PVC (SWR) floor trap/ multi trap with stainless steel grating and new wall crossing and filling with PCC 1:2:4 with waterproofing compound incl matching with existed tile and joining with outer pipe line with solvent all as specified and directed.

S&F in repair 100mm dia PVC floor multi trap with and grating complete all as specified and as directed.

S&F wash basins, vitreous china of size 450 x 300 or nearest higher size with and including CI brackets and 32mm waste coupling, waste pipe etc and cutting for and pinning in ends of brackets or erecting stand, making necessary connections to Pillar tap, ,PVC Connection, waste pipe / bottle trap etc., complete all as specified and as directed. Note: (i) The unit rate quoted shall be deemed to include the cost of Corner basin, brackets, 32mm waste couplings , waste pipe,15mm bore pillar tap,450mm length PVC Connection

Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest , colour white with and including P trap, lime concrete bedding and making necessary connection to soil pipes and flushing cistern etc.,complete all as specified and as directed.

Supply and fix PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed.

Supply and fix in repairs bib tap 15 mm bore, cast copper alloy fancy type, with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, fixed in repairs all as specified and as directed.

Supply and fix 15mm dia Angular valve with wall flange all as specified. fixed in repairs complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Taking down Cast iron / PVC pipe jointed 100mm jointed in cement mortar taking out of wall. including all fittings, heads, sheos, bends, swan-necks, etccomplete all as specified and as directed.

S & F PVC (SWR) bends any radious 110 mm bore provided

S & F PVC (SWR) bends any radious 75mm bore provided

S & F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal

S & F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal

S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S & F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

M&LPrecast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks 10cm width and setting in mortar(1:6) complete all as specified and as directed.

M&LPrecast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and as directed.

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar

Plain cement concerte 1:2:4 type B1 using 20 mm graded stone aggregate as in benching to manholes etc.,

M&L Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves,cooking platform and similar articles with plain faces complete as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thick complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering to soffit of RCC slab/ ceiling , etc. 5 mm thick in cement mortar 1:3 finished evenand smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.(Internal surface)

Material and labour for rendering 20mm thick in Cement Mortar 1:4 mixed with liquid water proofing compound as per manufacturers' instructions on stone masonry surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed.

M/L Preparing old steel surfaces girth exc. 10 cm girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L for applying three coats of white wash on walls including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M& L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and asdirected.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed

a) One light/fan/call bell point controlled by one switch

b) One 5 amps 5 Pin socket outlet on independent board

All as per Item No-3 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm 3 pin socket outlet, for independent complete all as specified and directed.

S&F Modular type socket out let 2/3 pin, 6/16 Amps, 2 module all as specified and as directed.

S&F Modular type Socket outlet 6 Amps 2/3 Pin, 2 module complete all as specified and directed.

S&F Modular type switch single pole 16 Amps one way, 1 module all as specified and as directed

S&F Modular type switch single pole 6 Amps, 1 module, one way all as specified and as directed.

S&F Modular type Bell switch single pole 6 Amps one way, one module all as specified and as directed.

S&F Call Bell, AC, ding dong type 230 Volt complete all as specified and directed.

S&F ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminals complete all as specified and directed.

S&F modular white cover plate with frame, 2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Havells cat part No LUMILINEPLUSPROBS20WLED865SPCSSIND OUG G

Supply and fixing LED lights fitting 1x 10W, 220V, AC , (2 ft.) High performance electronic driver , operating temperature 10° C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS10WLED865SPCWHIND or equivelent

S&F decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output IP >= 65,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Havells cat part No HEXAFT10WLED857SSYMBOPC or equivlent Bajaj / crompton

S & F SPN DB, 8 Way, Metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed.

S&F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 kA all as specified and dircted.

S&F Miniature circuit Breakers, SPN of capacity 6-32 Amps,C-Series 240 Volts with breaking capacity 10 kA all as specified and dircted.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings including taking down old unsv submain wiring complete all as specified and directed. Note: The cost for concealed submain wiring is deemed to be inclusive of cutting chases in stone masonary wall/roof and making good.

Please Enable Macros to View BoQ information