Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Price Bid ( Summary Sheet)

NIT Number CWC/RO-LKO/Engg./25-26/56T

Name of Work Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

NAME OF CONTRACTOR

Sd.-I SCH_I (CIVIL DSR)

Sd.-II Sch_II (CIVIL MR) 201005

Sd. - III SCH_III (E&M DSR) 30559

Sd. - IV SCH_IV (E&M MR) 27036

Grand Total (In Figures)

Grand Total (In Words)

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-I CIVIL DSR 2023

NIT Number CWC/RO-LKO/Engg./25-26/56T

Name of Work Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-I CIVIL DSR 2023

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 9,04,904.18

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule -II: CIVIL MR ITEMS

NIT Number CWC/RO-LKO/Engg./25-26/56T

Name of Work Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule -II: CIVIL MR ITEMS 201005

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 2,01,005.00

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule-III E&M DSR 2025

NIT Number CWC/RO-LKO/Engg./25-26/56T

Name of Work Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule-III E&M DSR 2025 30559

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 30,559.00

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub-Schedule -IV: E&M MR ITEMS

NIT Number CWC/RO-LKO/Engg./25-26/56T

Name of Work Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Sub-Schedule -IV: E&M MR ITEMS 27036

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Note Total CWC estimated Cost for this schedule including Cost Index, labour cess & applicable GST (Rs.) ₹ 27,036.00

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

Schedule A DSR 2023 based Civil Items

SLNo Description Qty Unit Rate Amount DSR-2023 No.

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8

1.1 All kinds of soil. 21.24 cum 260.3 2.8.1

2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif. 18.55 cum 196

3 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. 33.75 cum 700.5 2.25A

4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1

4.1 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5.4 cum 6812 "₹"\ #,##0.00 4.1.8

5 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 17.54 sqm 749.3

6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1

6.1 1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 7.67 cum 9045.75 "₹"\ #,##0.99 5.1.2

7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 5.2

7.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 0.99 cum 10852.95 5.2.2

8 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 1.88 cum 11505.5

9 Centering and shuttering including strutting, propping etc. and removal of form for 5.9

9.1 Foundations, footings, bases of columns, etc. for mass concrete 7.68 sqm 392.15 5.9.1

9.2 Lintels, beams, plinth beams, girders, bressumers and cantilevers 38.82 sqm 736.4 5.9.5

9.3 Columns, Pillars, Piers, Abutments, Posts and Struts 26.08 sqm 961.3 5.9.6

10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22

10.1 Thermo-Mechanically Treated bars of grade Fe-500D or more. 619.84 kg 107.85 "₹"\ #,##0.00 5.22.6

11 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1

11.1 Cement mortar 1:6(1 cement :6 coarse sand) 13.91 cum 7132.25 6.1.2

12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4

12.1 Cement mortar 1:6(1 cement : 6 coarse sand) 12.85 cum 117011.46 6.4.2

13 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 8.1

13.1 White Agaria Marble Stone sqm 3500.45 8.10.1

14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 1267.95

15 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21

15.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 11.34 sqm 2392.65 9.21.1

16 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48

16.1 Fixed to steel windows by welding 42.76 kg 219.1 "₹"\ #,##0.99 9.48.1

17 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.13

17.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 161.63 kg 22902.97 10.13.1

18 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16

18.1 Electric resistance or induction butt welded tubes 39.07 kg 194.4 10.16.3

19 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 31.96 sqm 1096.55

20 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41

20.1 75 mm diameter 20 metre 248.8 12.41.1

20.2 110 mm diameter 20 metre 377.4 12.41.2

21 12 mm cement plaster of mix: 13.1

21.1 1:6(1 cement: 6 fine sand) 45 sqm 333.35 13.1.2

22 15 mm cement plaster on the rough side of single or half brick wall of mix: 13.2

22.1 1:6 (1 cement: 6 fine sand) 105.71 sqm 383 13.2.2

23 Finishing walls with Acrylic Smooth exterior paint of required shade: 13.46

23.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 150.71 sqm 160.6 13.46.1

24 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62

24.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 30.46 sqm 226.25 13.62.1

25 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 150.71 sqm 23518.3

26 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2

26.1 W.C. pan with ISI marked white solid plastic seat and lid 4 each 6515.55 17.2.1

27 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4

27.1 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 5 each 9612.4 17.4.2

28 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7

28.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 4 each 2301.75 17.7.3

29 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28

29.1 Flexible pipe 17.28.2

30 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 4 each 1607.95 17.31

31 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 17.37

31.1 For 100 mm dia pipe 6 each 362.85 17.37.1

31.2 For 75 mm dia pipe 12 each 360 17.37.2

32 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 4 each 168.35

33 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9

33.1 20 mm nominal dia Pipes 50 metre 274.3 18.9.2

33.2 32 mm nominal dia Pipes 30 metre 438.6 18.9.4

34 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17

35 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18

35.1 20 mm nominal bore 4 each 462.5 18.18.2

36 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 per litre 11

37 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51

37.1 15 mm nominal bore 6 each 798.95 18.51.1

38 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52

38.1 15 mm nominal bore 6 each 670.45 18.52.1

39 Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. 12 each 74.8 18.53A

40 Providing and fixing PTMT pillar cock of approved quality and colour. 18.56

40.1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms 4 each 208.45 18.56.1

41 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27

41.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2 each 5957.9 19.27.1

42 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32

42.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2 each 26861.9 19.32.1

Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST 0.973

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

Schedule A MR based Civil Items

SLNo Description Qty Unit Rate Amount DSR No./MR

1 Providing and fixing colour coated galvalume profile sheets with the depth of 30 mm and pitch of corrugation 200 mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.60mm(TCT) total coated thickness( tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 (zinc aluminium alloy coating nominal composition : 55% aluminium, 43.5% zinc & 1.5% silicon mass total of both sides) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5X55mm) with EPDM seal and washers of make coroshield/durotuff as per the direction of Engineer-in-charge excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. All screw should be sealed with silicon sealant. 24 sqm 892 MR1

2 Providing and fixing PVC floor trap -110 mm dia of approved brand fixed with solution and sealing /protecting with cement concrete 1: 2 : 4 around the trap as per direction of engineer-in-charge. 9 each 142 MR2

3 “Construction septic tank (including cleaning chamber) with bricks of class designation 75 in cement mortar 1:6 (1 cement : 6 coarse and)” inside plaster 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement with water proofing compound foundation concrete raft 250 mm thick 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) laid to slope with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) with floating coat of neat cement mixed with water proofing compound. The top slab and 2 Nos. of baffle walls in pre-cast RCC 1:2:4 (1 cement : 2 coarse and : 4 graded stone aggregate 20 mm nominal size) finished smooth on all sides with 6 mm cement plaster 1:3 (1 cement : 3 coarse sand) 1 No. of bottom Baffle Wall in half brick masonry of class designation 75 in cement mortar 1:3 (1 cement : 3 coarse sand) with 12 mm/15 mm thick cement plaster in cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement, mixed with water proofing compound back filling of earth and disposal of surplus excavated earth providing and fixing Rigid-PVC rain pipe with Cowl swatter Terminal guard 100 mm Diameter, SW, pipe 2 Nos. CI pipe stack 100 mm Dia, with 2 Nos. of sluice valve 100 mm dia (for desludging) 15 Nos. C.I. steps 3 nost. I. cover of size 455x610mm LD with frame fixed to pre-cast RCC slabs, complete as per drawing No.CWC/ANC/BLD/207 excluding the cost of bucket.

Type ‘B’ : Inside size 4.00m x 1.40m x 2.10 m with cleaning chamber of inside size 0.90 x 0.90m x 2.10m 1 each 178319 MR3

Total Schedule MR

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

Schedule A DSR 2025 based E&M Items

SLNo Description Qty Unit Rate Amount DSR-2025 No.

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

1.1 Group C 7 Point 1704 1.10.3

2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2.1 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 32 Metre 311 1.14.2

3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

3.1 6 way , Double door 1 Each 2390 2.3.1

4 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

4.1 Single pole 4 Each 285 2.10.1

4.2 Double Pole 1 Each 696 2.10.3

5 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 7 Each 104

6 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 2 Each 659

7 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 2 Each 556 1.50.1

8 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 5 Each 259

Total Estimated Cost DSR-2025 E & M

CENTRAL WAREHOUSING CORPORATION

(A Govt.of India Undertaking)

SCHEDULE OF QUANTITY

Name of work : Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

Schedule A MR based E&M Items

SLNo Description Qty Unit Rate Amount DSR No./MR

1 Supply of PVC insulated/inner sheathed, Copper conductor,LT XLPE cable, 1.1 Kv grade, steel strip armoured as per IS 7098 (part-1)-1988 with up to date amendments, of following size as required (Make: Polycab, havells, Grandley, KEI, RR cable) 3 X 4.0 Sqmm Copper armoured 80 Each 265 MR1

2 Supplying of 230 mm sweep 230 volts exhaust/ ventilation fan. As required.Make : Havells, Model : Ventilair DSP 230mm Exhaust Fan or equivalent in Bajaj, crompton as per direction of EIC. 2 Each 1968 MR2

3 Supplying of 20 watt LED Batten Tubelight make Havells, Phillips, Crompton or similar 5 Each 380 MR3

Central Warehousing Corporation (A Govt. of India Undertaking)

REGIONAL OFFICE

Pre-Qualifying (PQ) Proforma: Bidder Information Summary {To be Filled by Bidder in sheet uploaded over portal and then to be submitted along with technical bid}

ENIT NO:CWC/RO-LKO/Engg./25-26/56T

Name of Work :- Construction of Labour Toilet block with electrical and plumbing works along with construction of septic tank, soak pit at CW-GIDA.

Name of the Bidder *Mandatory

SL Description Details (filled by Bidder)

See PQC S/n (1) to (4): Appendix-II of NIT

1 Name of the Bidder

1.1 Bidder Address, (registered)

1.2 Bidder Organization ID /CIN in case of Company

1.3 Bidder Telephone number

1.4 Bidder E-mail address

2 Type of Bidder constituent (Organization)

(JV not allowed where estimated cost of work put on Tender is up to Rs. 30 cr)

2.1 Attested copy of documents in support of Bidder Organization Type

(See ITB-Appendix IV clause number 3.2: 1 (b): Organization Details and Appendix-II of NIT: List of documents required in support of Bidder Legal Entity.

2.2 Current List of Directors/Partners: as applicable

3 Name of the person holding the power of attorney for this Bid

3.1 Designation

3.2 Contact details of person holding the power of attorney

3.3 Attested Copy of Power of Attorney to sign & submit the Tender (as per format given in EXHIBIT-III of Appendix-II)

4 Earnest Money Deposit (EMD) of Amount as mentioned in APPENDIX-1 (TIS) through NEFT/RTGS

5.1 PF Registration code number of Bidder

5.2 COPY of PF Registration number of Bidder

6.1 GST Registration code number of Bidder

6.2 COPY of GST Registration number of Bidder

7.1 PAN of the Bidder

7.2 COPY of PAN of Bidder

8.1 Whether Enlisted /Empaneled with CPWD/ MES/ Railway/ PWD/ CWC/any other PSU etc. if any,

8.2 Copy of Enlistment/Empanelment certificate Submitted or Not

9 Whether Bidder is executing or completed any work awarded by CENTRAL WAREHOUSING CORPORATION in Past Three FY Year (FY 2022-23, FY 2023-24 & FY 2024-25) and Current FY 2025-26.

10.1 Affidavit along with this PQ Performa (EXHIBIT-I) on NJS paper signed and submitted after filling necessary details.

10.2 Declaration of near relatives (EXHIBIT-IV) submitted.

Technical Eligibility Criteria:

See PQC S/n (5) in Appendix-II of NIT for details & qualifying limits.

11 Particular Technical Experience w.r.t. Similar Nature of Work:

11.1 Brief of Similar Nature Work Experience-1

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.2 Brief of Similar Nature Work Experience-2

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.3 Brief of Similar Nature Work Experience-3

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

See PQC S/n (6) in Appendix-II of NIT for details & qualifying limits.

Information on Financial Capabilities & Turn over

12.1 Annual Financial Turnover-Total Revenue (Income) (as per CA certificate and audited P&L Account)

iii FY 2022 –23

iv FY 2021–22 (only when audited turnover for FY 2024-25 is not available)

12.2 The average of financial turnover for the last three financial years i.e. FY 2024-25, FY 2023-24 and FY 2022-23 Or FY 2021-22 (FY 2021-22 to be referred only when Audited turnover of FY 2024-25 is not available)

1. Tenderers have to fill complete details in Pre-Qualifying Performa (Bidder Information Summary) in sheet uploaded over tender portal.

2. Documents pertaining to the above details should be scanned and uploaded on e-tendering website at the time of on-line tender submission.

3. RTGS/NEFT E-payment Challans with UTR no. duly authenticated by Bank may also be scanned & uploaded along with tender submission.

4. Bidder must refer Tender Information Summary (TIS) in APPENDIX-I, PRE QUALIFICATION CRITERIA (PQC) in (APPENDIX-II) and Tender eligibility criteria as per ITB clause 3 (APPENDIX-IV) appended with NIT before filling this PQ Performa and Affidavit.

5. The PQ Performa EXHIBIT-I along with Its Annexure (Affidavit) enclosed with this Performa is mandatory and must be submitted by the Bidder.