Upgradation of existing check post of wild life Division at Mahey

Grinding for wooden flooring for finishing work including all complete Job.

Dismantlingdoors,windows and clerestorywindows (steel orwood) shutter includingchowkhats,architrave,holdfastsetc. completeandstackingwithin50 metres lead : Of area beyond 3 sq. metres

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades, laidon20mmthick cement mortar1:4(1cement:4coarsesand), jointing [email protected] kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well-matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm

Providing and fixing traditional door including carving and polishing with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws and paint work Traditional

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float Glass Panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm

Providing and fixing ISI marked brass aldrop for door aldrop for door with nuts and screws etc. complete: 300x16 mm

Providing and fixing 4’’ tongue and groove wood panelling for wall and ceiling etc. with necessary screws polishing all complete Job.

French spirit polishing, two or more coats on new works including a coat of wood filler

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness ofapproved shade, quality and make, made from rigid foam sheets (Single extruded) having density 601Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall besealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent havingnecessary screw holding capacity. Shutter shall be fixed to frame using approved hinges withnecessary stainless steel screws, all complete as per direction of Engineer-in-charge

Providing and fixing kitchen chimney including duct in walls all complete job.

Refixing of electrical item after completion of civil works including ectension of wire all complete job.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer of approved make Cera, Somani, Hindware

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm

Providing and fixing CP Brass telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing of superior glass (of approved quality) and orequired shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357mm

Providing and fixing toilet paper holder. C.P. brass

Providing/laying and fitting of PPR pipes complete including cost of pipes and fittings.25 mm

Providing and fixing C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license).

Providing and fixing CP jali trap of approved make

Providing and fixing of material for the insulation of pipe with nitile tube tapping with cello tape rock wool 6 inch per side wire mesh polythene tapping with cello tape aluminum sheet 26 guage cladding with dia complete job including carriage 19mm thick 50mm dia OD (PPR 32mm)

Providing and fixing of material for the insulation of pipe with nitile tube tapping with cello tape for inner wall fitting complete job including carraige 19mm thick 50mm dia OD (PPR 25mm)

Providing and fixing heat tape 33watt on PPR pipes made of denforced or chromelox or equivalent make as approved by engineer incharge complete job

Providing and fixing of insulation of water storage tank with k flex , polythene, glasswool, chicken mesh and covered with heat tracing wire, k flex, glass wool, chicken mesh and aluminum foil etc completed job.

Supplying and fixing C.I. cover for manholes: 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm

Providing and fixing on wall face un plasticized - PVC molded fittings/ accessories for unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend

110 mm bend

Providing and fixing 15mm nominal bore CP brass angle valve for basin mixer and geyser point of approved make conforming to IS 8931 of make Cera,Somany,Hindware

Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing PPR Unions PPR Union 25mm

Providing and fixing PPR Unions PPR Union 32mm

Providing and fixing geyser of required capacity of approved make all complete as per direction of the Engineer in-charge. 25 Litres

Providing and fixing ball valve (PPR) of approved quality complete. 25 mm nominal bore

32 mm nominal size

Transportation of boring equipment ,machine, tools to the new site of bore work, fixing of complete camp by way of erection of equipment ,tools, accessories attachment fixing of tent for labor and stacking of material at bore well site. The job also includes leveling of ground, drilling machine and other charges on account of POL etc. a) For 1st shifting of boring machine and equipment Drilling of bore hole with 137mm dia bit using ODEX/DTH method of drilling as per site condition upto depth in collapsible/rocky strata, conglomerate boulders pebbles, clay etc including cost of M.S casing pipe consumable store, drilling bits POL etc with the system of simultaneously lowering of 125mm dia ID M.S casing pipe 4 to 5 mm thickness which shall be welded together. a) Drilling upto the 70 mtr depth B. Supply, Installation, Testing & Commissioning 2 HP-3HP Solar Submersible Pumpset including all accessories as :- (i) Solar PV modules (ii) Stainless steel solar submersible pump and motor(2hp-3hp) (iii) Controller (iv) Mounting structure set (v) DC cable as per site requirement (vi) Cable AC as per site requirement (vii) Cable DC as per requirement (vii) Safety rope as per requirement (viii) Column pipe as per diameter of pump (ix) multicry stallation, 250wp minimum (x) Delivering pipe HDPE pipe 40mm dia. (xi) Cement concrete platform size 4'x4'. All civil, mech. and electric works are required to make the system functional is included in the job.

Drilling of bore hole with 137mm dia bit using ODEX/DTH method of drilling as per site condition upto depth in collapsible/rocky strata, conglomerate boulders pebbles, clay etc including cost of M.S casing pipe consumable store, drilling bits POL etc with the system of simultaneously lowering of 125mm dia ID M.S casing pipe 4 to 5 mm thickness which shall be welded together. a) Drilling upto the 70 mtr depth

B. Supply, Installation, Testing & Commissioning 2 HP-3HP Solar Submersible Pumpset including all accessories as :- (i) Solar PV modules (ii) Stainless steel solar submersible pump and motor(2hp-3hp) (iii) Controller (iv) Mounting structure set (v) DC cable as per site requirement (vi) Cable AC as per site requirement (vii) Cable DC as per requirement (vii) Safety rope as per requirement (viii) Column pipe as per diameter of pump (ix) multicry stallation, 250wp minimum (x) Delivering pipe HDPE pipe 40mm dia. (xi) Cement concrete platform size 4'x4'. All civil, mech. and electric works are required to make the system functional is included in the job.