Construction of Anganwadi Building at Emanpatti Village and Naranapuram Panchayat

Amount

Earth work excavation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting etc., complete.

PCC 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc., complete.

Refilling in foundation and basement and trenches with Excavated earth in layers not more than 15cm thick,well rammed,watered and compacted aomplying with standard specification etc.,complete.

Filling in basement with Conveyed gravel in layers of not more than 15cm thick,well rammed,watered and compacted aomplying with standard specification etc.,complete.

Supplying and filling in foundation and basement and trenches with Filling sand in layers of not more than 15cm thick,well watered and consolidated complying with standard specification etc.,Complete.

Collection and supply of 40mm HBG metal and filling in to the Soak Pits including cost and conveyance to the siteand all labour charges for filling as per standard specifications

Random Rubble masonry in CM 1:5 mix using required bond stone including all cost and conveyance of materials to site and all labour charges etc., complete.

Dry Brick work using country bricks 83/4"x41/4"x23/4" including all cost and conveyance of materials and labour charges etc., complete.

Brick work with cement mortar 1:5 mix using country bricks of size 83/4"x41/4"x2" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc., complete.

Centering charges for all concrete works including all cost and conveyance and all labour charges etc., complete.

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:11/2:3 mix using 20 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing laying,curing etc., complete.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete

Paving the floor with best quality Vetrified ( Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete

Dadoing the walls with new Glazed tiles of size 150 x150 x6 mm laid in CM 1:2 ,10 mm thick and pointig with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with ties surface

Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters etc., complete.

Terrace flooring with one coarce of new machine pressed tiles of size 23x23x2 mmusing Cm 1:3 with water proofing compound 2% weight of cement used and the joints pointed with same

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Plastering with CM 1:5 mix 12mm thick including cost and conveyance of all materials etc., complete.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber systemwhich provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with allcorner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Door D (0.90x2.10m)

Door D1 (0.75x2.10m)

Door D2 (1.10x2.40m)

UPVC Window Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Windows of casement type (open) from theprofile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDM Rubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the ExecutiveEngineer before use on work

Window (1.20x1.30m)

Fabrication and supply of Mild Steel N-type Glazed Ventilators etc., complete.

Ventilator V (0.9x0.45)

Fabrication and supply of RCC Jolly etc complete.

Jolly J

Jolly J1

Supplying and fixing in positon Baby friendly WC / EWC glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS and finishing the top to the required slope and including giving necessary connection to PVC pipes by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.

IWC - Baby Friendly

Supply & fixing in position of Wash Basin (Colour) with all accessories etc., complete.

Supply & fixing in position of urinal (White) with all accessories etc., complete.

Labour charges for fixing in position of steel door etc., complete.

Labour charges for fixing in position of steel window,Ventilator etc., complete.

Distempering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all laboure charges etc., complete.

Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required etc., complete.

Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,etc., complete.

Supply & fixing in position of 110mm dia PVC pipe with cowl etc., complete.

Supply & fixing in position of RCC precast slabs of 75 mm thick etc., complete.

Supplying & fixing with cuddapah slabs 20-40mm thick over a bed of concrete 100mm thick and pointed with cement mortar 1:3 etc., complete.

Provision for Electrification works

SD 143 DP SWITCH

b)SD 65 (Service wire)

c)SD 125 (Meter Board)

d)SD18 (Light/Fan Point)

VEL PANDIAN (BID ID -1300506)