15TH FINANCE COMMISSION GRANT 2024-2025 TIED GRANT FIRST INSTALLMENT

Amount

Earth work excavating and depositing on bank with initial lead of 10 metre and initial lift of 2 metre in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

R.R. Masonry in Cm 1:5 mix using rough stone Bond stone including cost & conveyance and all labour charges etc., complete

Brick work in cement mortar 1:5 mix using basement quality of country bricks (23m x 11cm x 7cm) for foundation including cost and conveyance of all materials to site including curing as perstandardspecification

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

1)OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220 / 2002 WITHOUT PANEL BOARD Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and asamended thereafter and BEE 3 Star Rated capable of discharging the following duties due to allcauses. The pump shall be with stainless steel shaft and dynamically balanced bronze mixedtype impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as perIS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 coresuitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designedwith minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz(±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, FullyAutomatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HPstarting and for continuous operation.Duty lpm x m 1250*100

2) 4 Sq.mm. Core cable

3)100mmGI pipes

4)125mmGI pipes

5) 125 mm CI D/F SLUICE VALVE WITH CAP/ WHEEL

6) 125 mm G.M. GATE VALVE

Supply of HDPE PIPES - PE 100 AS PER IS 4984/2016 including all cost and conveyance.PN 6 110 mm dia HDPE PIPES

125 mm diaHDPE PIPES

Lowering HDPE pipes and specials to trenchand laying to proper grade and alignmentand as directed by the TWAD Officers 110 mm dia HDPE PIPES

125 mm dia HDPE PIPES

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD officers 100mmGI pipes

125mmGI pipes

Jointing HDPE Pipes and Specials by buttfusion welding / electro fusion welding jointsusing fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012including cost of hire charges for butt fusionequipment power supply arrangements etc.,complete as per directed by TWAD BoardOfficers. 110 mm dia HDPE PIPES

125 mm dia HDPE PIPES

Refilling with excavated earth other than sand complying with standard specification.

Labour charges for erection of Horizontal Shaft, Centrifugal pumpset (Coupled / Monoblock) in borewell / Openwell including fixing of suction pipe and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel Board consisting of TPIC switches stater, voltmeter, Ammeter,Capacitor singl;e phasing preventor and laying and jointing the cables and twin earthing asper IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

V K THANGAVEL (BID ID -1208020)