CERTAIN REPAIR TO PLINTH PROTECTION ROUGH CAST PLASTERING AND ASSOCIATED WORKS IN MD AND OTM ACCN AT AFS RAJOKRI UNDER GE (AF) GURGAON

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) all as specified and directed.

M & L for hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 50mm thick PCC 1:2:4, type B1, using 20mm graded aggregate as in floor finished even and smooth without using extra cement including use of necessary form work.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing incl complete all as specified and as directed.

M&L 20-25 mm thick machine kota stone slab as in skirting/dado, riser of steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for 18-20 mm thick Granite tiles machine cut , bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1 : 4) laid complete all as specified.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified.

M&L for 15 mm thick rendering in cement motar (1:4) on vertical surface for bracking of tiles etc complete all as specified.

Taking down cement plaster or cement lime plaster on brick,concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified

M&L for Rough Cast plaster on brick wall consisting under coat of cement and sand motar 1:3 not less than 10 mm thick and while it is in plastic state the Rough cast misture consisting of crushed stone or fine gravel mixed of size 6 mm with coase sand and cement in the ratio 1:1:1 shall be applied and finished even including necessary grooving complete all as specified and directed.

M&L for 15 mm thick plaster in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified.

M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls including finishing surface even and smooth without using extra cement

M&L for 5 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling including finishing surface even and smooth without using extra cement.

M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified.

M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified

M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified

Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately.

S&F in repair false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid "Armstrong" white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level and incl dismantling old undervicable false ceilling complete all as per manufacturer’s instructions and as directed.

Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete.

M&L for 40 mm thick PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) as in roof padding, sub base of floor coping complete all as specified and directed.

Material and labour 15 mm thick screed bed in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only Integral water proofing compound

Material and labour, water proofing treatment of roof consisting as under:- (a) Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments over 15mm thick cement screed bed in cement mortar 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed

Disconnecting existing PVC water tank of capacity exc. 250 ltr but not exc. 500 ltr, setting aside for lowering down if required for repairs,hoisting if required reconnecting and refixing in position on roof including cleaning of Overhead tank & removing the sludge washing down with detergent/ bleaching powder and writing the date of cleaning with suitable paint complete all as specified.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified.

Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 ltrs all as specified and directed by Engineer - in - Charge.

S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge .

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed.

S&F in repair for 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed.

S & F in repairs Ist quality vitreous china pedestal pattern wash basin, white, flat back, size 550x400mm , including one number chromium plated waste fittings, 32 mm dia brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with & including 32 mm dia PVC waste pipe with connector including cutting for and pinning in ends of brackets etc complete all as specified and directed

S & F in repairs Ist quality vitreous china wash basin, white, flat back, size 550x400mm , PVC connections suitable for hot and cold water,bottle trap (with internal partition) 32 mm size with 300mm &190mm long wall connection pipes & wall flange, and fixing withbrackets/bolts including cutting and pinning in etc complete all as specified and directed.

S&F in repair vitreous china Counter top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent

S&F in repairs white vitreous China wash down water closet pan (padestal pattern) and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipe etc. complete all as specified and directed.

S&F in repair vitreous china Rimless Single Piece WC (White) With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x690x750 mm, S Trap- 300 mm complete all as specified. (Cat No.CNS-WHT-853S300SPPSM) Make: Jaquar/Equivalent

S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and mixed in position complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified.

S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

S & F in repair brass CP Wall mixer with L bend incl (provn for over head shower), 15 mm bore chromium plated fancy type for mixing hot & cold water screwed down for iron pipe complete all as specified and directed (Cat Part No F2002401 Cera or equivelent)

S&F Single Lever 3-inlet Diverter Exposed parts kit chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve and Button Cap , 15 mm nominal bore complete (Cat No.OPP-CHR-15193NKPM) Make: Jaquar/Equivalent

S & F in repair brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe, 15mm dia chromium plated fancy type complete all as specified and directed

S&F in repair Centre hole basin mixture with hot or cold mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, complete all as directed

S&F in repair Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent

S&F in repair 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified.

S&F in repair angular two way angle cock with wall flange, 15 mm bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified.

S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S & F in repairs 15mm dia stop valves/angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S & F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union all as specified and directed.

S&F in repair Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws all as specified and directed

S&F in repairs coloured PVC toilet cabinet of size 622x422mm with looking mirror including repairing the disturbed surfaces to match with existing.(Make: Pyayag-555 or equivalent) all as specified and directed.

S&F in repair Corner glass shelf, 5mm thick glass, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts all as specified and as directed. Make: Onida/ High Life/ Eagle

S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified.

Please Enable Macros to View BoQ information