Construction of Emergency Ward Building in Community Health Centre Charkhari in Vikas Khand Charkhari

Boring of 300mm dia piles of double under reamed and 4.00 meter depth below pile cap with M-25 cement concrete ,Boring with Hydraulic piling rigs with power unit comp. in all respect excluding cost of reinforcement DSR Code No 20.3.1

R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion 1:1.5:3 in piles grade beam excluding supply of reinforcement and also including supply of all material labour T&P centering and shuttering etc.

R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion 1:1.5:3 in columns excluding supply of reinforcement and also including supply of all material labour T&P centering and shuttering etc.

M-150 brickwork in 1:4 cement and fine sand mortor including cost of material , labour, T&P complete DSR Code No 6.1.1

DPC in 4 cm thick in 1:2:4 cement csand and 20mm stone grit and apped water proofing compound .DSR Code 4.10

M-150 brickwork in 1:6 cement and fine sand mortor including cost of material , labour, T&P complete in super structure DSR Code No 6.4

R.C.C . Work in cement coarse sand and 20mm gauge stone gride in proportion 1:1.5:3 in lintel T-beam, slab excluding supply of reinforcement and also including supply of all material labour T&P centering and shuttering etc. Lintel

M.S. Work in R.C.C. Incluing supply of steel its wastage and hooks and authorised overlap

S/F M.S Fan box with 12mm Ms bar

Earth work in filling by cartage of earth from 8.00km by tractor trolly.

12mm thick plaster work in 1:4cement and fine sand mortor

sand filling under floor

Laying of PCC in 1:4:8 with cement , c sand and 40 mm brick ballast in base concrete

40mm thick CC floor in 1:2:4 cement c sand and 20mm stone grit in panells finished by 3mm floating coat of neat cement without base concrete DSR Code No 11.3.1

P/laying 8to 10mm thick ivory or light shad vitryfied tiles of 600mm x 600mm size in flooring laid with 1:3 cement sand mortor finishing with cement slurry pigment grouting and polishing complete

P/ applying white cemnent based putty of avg. thickness 1mm of appd. Brand over the plastered wall surface to prepare to surface even and smooth

Finishing wall with textured exterior paint of required shad : New work (two or more coats applied ) at the rate of 3.28lit /10sqm over and inclulding priming coat of exterior primer applied at the rate of 2.20lg /10sqm

Provding wood work in frams of doors windows ventilators and other frams wrought framed and fixed in position with hold fast lugs are dash fastner comp.DSR code No 9.1.2

S/F of M.S. grill in window frame DSR Code No 10.15.1

S/f of 35mm thick Sitapur com. Quality ply wood shutters

S/f of oxidise iron fitting

painting on new iron work in small areas with one coat of readymix priming coat and three coat of readymix paint appd. Brand as per SI. No. :- 641+642

S/f 4.00mm thick glass strip 40mm wide depth in flour DSR Code No 11.13.1

15 mm thick Roughcost Plaster with 1:3 cement and c sand mortor com. In all respect . DSR Code 13.7.1

S/F ofAluminum chaukhat and Aluminum frame with all fitting and locking arrengement, autoclosing system .DSR Code No 21.1.1.3

P/F glazing 5.00mm thick in Alumunum door window and ventilator shutters DSR Code no 21.3.2

P/F in position collapsible steel shutters with vertical channel 20x10x2 mm and brased with flate iron digonals 20x5 mm size with top and bottam rail of T iron 40x40x6 mm with 40 mm dia steel pulleys comp. DSR Code No 10.3

S/F of 100 mm dia PVC pipe 8 kg./Sqcm. Pressure

Supply of steel chair ( Three chair set)

site clearence before and after completion the work

imformation board + photography

SEPTIC TANK

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.(DSR 2.6.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6 & DSR 5.22.6(A))

12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)DSR(13.7.1)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete:40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1)

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform AS PER DSR 5.9.3

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR - 19.32.1)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR - 17.1.1)

providing & fixing of wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass single hole mixturewaste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required (550x400mm). (DSR - 17.7.4)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.610x510 mm bowl depth 200 mm.(DSR - 17.10.2.1)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 453x357 mm.(DSR -17.32.2)

Providing & fixing CP Brass 32 mm size Bottle Trap .. Complete.(DSR - 17.22A)

Providing & fixing CP Brass Single leave telephonic wall mixture….. .. Complete ( AS per DSR Item No. 17.22 B )

flat black or angular front lipper urinal basin of white glazed earthen ware 465x355x265 mm.PWD(22.9)

Providing & fixing ON WALL FACE Unplastified RigidPVC rain water pipe 110 mm diameter. ….. .. Complete ( AS per DSR Item No. 12.41.2 )

Providing & fixing Unplastified RigidPVC pipe Clips for 110 mm diameter. ….. .. Complete ( AS per DSR Item No. 12.43.2 )

Providing & fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipe Exposed on wall 25mm dia nominal outer dia ….. .. Complete ( AS per DSR Item No. 18.7.3 )

Providing & fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipe Concealed on wall 15 mm dia nominal outer dia ….. .. Complete ( AS per DSR Item No. 18.8.1 )

Providing & fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipe Concealed on wall 20 mm dia nominal outer dia ….. .. Complete ( AS per DSR Item No. 18.8.2 )

Providing & fixing 45 cm long Unplastified PVC Connection pipe with brass union 15 mm nominal bore. ….. .. Complete ( AS per DSR Item No. 18.21.2.1 )

Providing & fixing CP brass bib cock 15 mm nominal bore.(DSR -18.49.1)

Providing & fixing CP brass Long body bib cock 15 mm nominal Bore.(DSR - 18.51.1)

Providing & fixing CP brass Angle valve for basin mixture and gyser points of 15 mm nominal Bore.(DSR - 18.53)

Supply & fixing of 25mm dia gun metal gate valve with C.I. wheel of approved quality. (DSR -18.17.1)

Supply & fixing of 25mm dia Ball valve of approved quality.(DSR - 18.18.3)

Providing & Placing on terrace wter storage tank ( AS per DSR Item No. 18.48 )

Providing & fixing C.P. BRASS Two-way angle valve for EWC points & for fixing Ablution health faucet of approved quality confirming to IS : 8931 , 15 mm nominal bore -ESSCO SQT 526 AKN (MR)

Providing & fixing 75X2 CM C.P. BRASS TOWEL RAIL complete with C.P. Brass brackets fixed to wooden cleats with C.P. brass screw -ESSCOAEC-1181.(MR)

Providing & fixing C.P. BRASS SOAP TRAY FIXED to the wall with PVC rubber plug complete with C.P. brass screw -ESSCOAEC-1131.(MR)

Providing & fixing 15 mm dia inlet C.P. BRASS single flow overhead shower with arm -ESSCO EOS-542A - 125 MM DIA.(MR)

Electrical Works

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C- DSR 1.10.3

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.- DSR 1.11

Submains : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire- DSR1.14.1

Submains :Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire- DSR1.14.3

Submains :Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.-4 X 10 sq. mm + 2 X 6 sq. mm earth wire DSR1.14.10

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.- DSR1.25

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.- DSR1.31

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.- DSR1.32

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for A.C. Point/MCB Point)- DSR1.57

Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)-4 way (4 + 12), Double door- DSR2.4.1

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.- DSR2.1-Single pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. - Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A-Marcket Rate

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.- DSR5.4

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)- DSR5.9

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.- Marcket Rate.

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA- DSR-1413

Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA- Marcket Rate

Supply and fixing of 3 watt to 6 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) - Marcket Rate

Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size - Marcket Rate size 25 sq mm x 3-1/2core

Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect. - Marcket Rate

Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. Marcket Rate

Please Enable Macros to View BoQ information