PETTY REPAIRS TO B/R ASSETS AND REPAIR OF INTERNAL ELECTRIFICATION WITH CONNECTED ITEMS FOR CE RND AND DMDE OFFICE COMPLEX INCLUDING RESIDENTIAL AREAS AT AGE B/R RND SECUNDERABAD

Amount

Repairs to leaking bib tap, pillar tap, stop cock, angle cock and gate valve of 15 & 20mm dia by changing spindles, rubber washers as required to complete the defect all as directed

Removal of air lock/blockage in 15mm/20mm bore GI water tubing cleaning the pipe and fittings etc and refixing the same in position all as directed.

Taking down of existing concealed type flushing cistern and repair and replacement of wall cock, syphon and anglecock and refixing in the same position complete all as specified and directed. Note: Demolition of existing

Resecuring loose/ hanging flushing cistern of any description and capacity including brackets/ gitties as required including connecting water pipe and flush pipe complete all as directed

S&F in repairs 16 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor complete all as directed.

S&F in repairs 16mm Brass elbow suitable for 16mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

S&F in repairs 20mm Brass elbow suitable for 20mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

S&F in repairs 16mm Brass Tee suitable for 16mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

S&F in repairs 20mm Brass Tee suitable for 20mm bore CPVC pipes including fixing to the pipes complete all as specified and as directed

S&F in repairs 20mm Male brass threaded adaptor suitable for 20mm bore CPVC pipe including fixing to pipe complete all as specified and as directed

S&F in repairs 20mm female brass threaded adaptor suitable for 20mm bore CPVC pipe including fixing to pipe complete all as specified and as directed Make for item 5 to 12 : Prince/Astral/Sudhakar/Aashirvad

Supply and fixing in repairs GI small fittings such as socket, elbow, nipple, tee, union etc for galvanised iron 15mm bore pipe complete all as specified and as directed. Note:- Taking down and refixing of old GI tubing upto 1.5m included in rates.

All as per item no 13 above but 20 mm bore of pipe

All as per item no 13 above but 25 mm bore of pipe

S&F in repairs 32 mm bore PVC waste pipe for WHB complete all as directed

S&F in repairs 40 mm bore PVC waste pipe for urinals/sink complete all as directed

S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed

S&F in repair waste fitting brass chromium plated 40mm dia for sinks all as specified and directed

S&F in repairs PVC low level syphonic action type flushing cistern of 10 Ltrs capacity including brackets complete all as directed

S&F in repairs 100 mm dia stainless steel grating for nahani traps with or without hole as required for waste pipe complete all as directed

Petty repair/adjustment to washer, syphon, Syphon washer and float valve etc, for low level flushing cistern and making functional complete all as directed.

S&F in repairs handles suitable for PVC low level flushing cistern of any type complete all as specified and directed.

S & F in repairs tubular towel rail 20 mm dia D type brass chromium plated type 60 cm long between the flanges complete all as directed

S&F in repair 15 mm float valve for low level flush tank complete all as directed. MAKE:- Super flow or equivalent

S&F in repair PVC Syphon for low level flushing cistern assembly complete all as directed Make : Super flow or equivalent make

S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as directed. Make: Prayag, Polytuff

S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as directed. Make: Prayag, Polytuff

S&F in repairs PVC connection15 mm x 600 mm with both side check nuts and washer complete all as directed. Make: Prayag, Polytuff

S&F in repairs 15 mm bore dia angle valves, cast copper alloy,chromium plated fancy type, screwed down, high pressure, with capastan head, and screwed both ends for iron pipe or for unions complete all as directed.

S&F in repairs 20mm bore gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed to bore of pipe 20 mm complete all as directed

S&F in repairs 25 bore gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed to bore of pipe 25 mm complete all as directed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as directed

S & F in repairs PVC (SWR) bends 110mm bore any radius for rain water pipes complete all as directed

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera

S&F in repairs Plastic water closet seat, closed pattern with flat bottom and cover fixed with MS chromium plated hinging devise and flush pipe complete all as directed.water closet seat complete all as directed. Make: Parryware/ Hindware/ Cera

S&F in repair viterous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and making good to floor complete making good to floor all as directed. Make:Parryware / Hindware/ Cera

S&F in repairs viterous china WHB white flat back size 550 mm x 400 mm excluding taps and brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed. Make: Parryware/ Hindware/ Cera

Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints and stainless steel arm complete all as specified and as directed

S & F in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

S&F in repairs CP brass two way bib tap of 15mm bore dia with capastan head, complete all as specified and directed.

S&F in repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed.

S&F in repair telephone hand shower complete all as directed. Make for item Nos.41 to 45: Jaquar/Hindware/Parryware

S&F in repair Health faucet,case-copper alloy, chromium plated including all necessary fittings complete all as directed. Make: F160013CP of Hindware or equivalent as approved

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down, screwed for iron pipe complete all as directed.

S&F in repairs 15-mm bore bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, and screwed for iron pipe complete all as directed. Make for item Nos.47 & 48: Jaquar/Hindware/Parryware

S&F in repair PVC bathroom cabinet with looking mirror of size 500 mm x 400 mm x 140 mm complete all as directed. Make : Commander, Prayag

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) as in parapets of two to three storeyed buildings including demolition of brick work built in cement mortar complete all as specified

M&L for Brickwork with subclass‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, including demolition of brick work built in cement mortar complete all as specified

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.and removing debris outside MOD premises complete all as specified and directed

M&L 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces, finished even & smooth surfaces without using extra cement complete all as specified.

M&L for preparation of new plastered or un-plastered surface of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer on walls complete all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of exterior acrylic emulsion paint over a coat of primer on walls complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as directed.

M&L cement concrete 1:4:8, Type D2 (using 40 mm graded stone aggregate) as in mass filling and similar works complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4, Type B1 (using 20 mm graded stone aggregate) as in floors and finished even and smooth without using extra cement in small patches of area not exceeding 3 sqm each complete all as specified and directed.

S&F in repairs 40mm dia brass polished cup board knobs fixed with nuts and screws all as directed.

S&F Non skid joint less coloured ceramic tiles 7-8mm thick, area of each tile exc 0.06 Sqm n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including 15 mm thick screed bedding in CM 1:6 including dismantling existing tile work with screed bed complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10 mm thick backing layer of cement mortar 1:4 including dismantling existing tile work with screed bed complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x600x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10 mm thick backing layer of cement mortar 1:4 including dismantling existing tile work with screed bed complete all as specified.

M&L light shade vitrified ceramic tiles approved shade 10 mm thick (square/rectangular) polished area of each tiles n.exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over M&L 15 mm thick screed bed in cement mortar 1:6 including dismantling existing tile work with screed bed complete all as specified and directed.

All as per item No. 65 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with screed bed complete all as specified and directed.

S&F in repairs 2nd class hard wood fillets square, rectangular or triangular in section beads, wrought,screwed with nails,mitred edges, straight of size exc 3 sqcm but n exc 6 sqcm for glazed or gauzed joinery including taking out old existing beads and painting to match the existing surfaces complete all as specified and directed.

S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as directed

S&F in repairs 125 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish complete all as directed

M&L running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

S&F Rotational moulded polythylene water storage tanks,three layers white in colour (Cylindrical vertical with threaded lid) hoisted and fixed in position, 500 litres capacity including dismantling existing tank complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame or second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as specified.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame or second class hard wood beading in suitable size for wooden frames in squares exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as specified.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed.

S&F in repairs MS powder coated curtain rod 25 mm dia of standard thickness and one pair of suitable brackets complete all as directed.

S&F in repairs MS powder coated fancy type curtain brackets for 25 mm dia curtain rod and fixed with screws and PVC sleeves complete all as directed.

Easing of door/window shutters of any size/any number of panels for easy closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolts, door closer,locks of any type, handles, door stopper etc complete all as directed.

S&F in repairs corner glass shelf of size 300x300 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on both sides fixed in position complete all as specified and directed. Make- Hi life

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

S&F aluminium handles cast type anodised 200 mm ISI Marked complete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section ISI Marked complete all as specified and directed.

S&F floor door stopper of alumium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and directed.

S & F in repairs floor door stopper of alumium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm length of bolt complete all as specified and directed.

S & F mild steel door spring 200 mm long including roller and roller plate complete all as specified and directed.

S&F in repairs curtain rod 25 mm dia stainless steel of grade 304 with end finials etc fixed in position complete all as specified and directed.

S&F in repairs stainless steel bracket of grade 304 suitable for 25 mm dia curtain rod fixed in position with stainless steel screws complete all as specified and directed.

Disconnecting existing tanks n.exc 500litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position includingCleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.

Dismantling timber scantling 40 sq cm and over in section, in any position, framed work

Dismantling timber scantlings in fillets,rails,posts,rafters,purlins etc under 40 sq cm in section, in any position unframed work.

S&F in repairs MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling existing AC sheet of any description all as directed.

S&F in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley gutters of four storeyed building, fixed to existing sheeting supports including necessary scaffolding complete all as specified and as directed.

S&F in repairs Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete all as directed. Make: Godrej/Link/Sheel

S&F in repairs stainless steel peg set of 06 hooks complete all as directed

S&F in repairs nylon net mosquito proof with wire cloth best quality colour complete all as directed

M&L 12mm Plywood 7 layer grade BWR type BB fixed in repairs with screw to timber frame work complete all as directed.

M&L 6mm Plywood 7 layer grade BWR type BB fixed in repairs with screw to timber frame work complete all as directed.

M&L 19mm thick pre-laminated particle board exterior grade pre-laminated on both sides with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, pelmet boxex, shelves and similar items, including taking down old laminated work of any description complete all as directed

M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint.

S&F in repairs brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete all as directed. Make: Godrej/Link/Sheel

S&F in repairs SS cylindrical lock suitable for 30 to 40 mm thick shutter with duplicate keys complete all as directed. Make: Godrej/Link/Sheel

S&F in repairs venetian blinds vertical type 100mm width with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed. Make : VISTA/ LEVADOR/ AMAR

S & F in repairs stainless steel kitchen rack of thickness 0.60 to 0.70mm and outer dimention 900mm x 900mm x 250mm complete all as specified.

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete in all respect and all as specified.

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile of any descrption complete all as directed by Engr-in-charge Make for item No.108 & 109: SPECTRA/CLASSIC/ULTRA TILE/ DECO/ TOPAZ/ AMCON/ HICON/ NAMO PAVER

Providing and fixing false ceiling with light weight calcium silicate tiles of spin tone surface textured 'Aerolite' make or equivalent of size 595x595mm having 15mm thick densified micro look edge in true horizontal level suspended on shilhouette profile suspension system of Grid made from hot dipped G.I steel section potary stitched double webbed power coated white consisting of main T-runner 42mm*14mm and 0.30mm thick and cross T of size 33mm*14mm and 0.30mm thick placed at 60cm centre to centre having width of flange 14mm with a 6mm reveal profile, (Black). The Grid system to be rested on the periphery wall/ partitions on a w-profile wall section made of precoated galvanized steel of dimension 3.0m long *(15mm + 10mm) *22.5mm and laying false ceiling for services like diffusers grills including cutting, making opening for services like diffusers frill light fitting, fixtures smoke detectors etc. Wherever required, main T-runner to be suspended from ceiling using G.I soffit cleats of size 25mm*35mm*1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I adjustable rods with galvanized level adjustment clips spaced as required at any heights as per specifications, including taking down existing ceiling board with frame work complete all as per direction of Engineer-in-charge.

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed MAKE: CAT No 92071 of HINDWARE (S-10) plaster colour or equivalent in PARRYWARE/CERA as approved

Supply and fixing in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe and including provision of brass urinal spreader, CP waste coupling and PVC waste pipe complete all as specified and as directed Make:F60002 of Hindware or equivalent as approved

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates), n.exc 100 mm thick as in levelling course over roofs incl demoition of old cement concrete including cleaning/removal of vegetation,plants/ tree cutting over roofs,trimming of branches obstructing the work complete all as specified and as directed

(a) M&L cleaning the surface, remoive dust dirt, loose particles and unsound substrate and providing 15mm thick cement screed (1:4) mixed with Dr Fixit water proof compound as per manufacturer's direction. (b) Applying primer coat with solvent based bitumen primer @ 0.30 ltr/ Sqm (c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrance weighing not less than 3.00 Kg/Sqm using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap (d) Heat both overlap with round trowel to seal over lap excess compound smoothened, pressed into seam using hot trowel (e) Seal edges well into grooves & protect with CM 1:2

M&L Hydraulically pressed plain cement concrete tile of size 250x250x19/20mm laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

M&L 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces in patches as in facias,fins,chajjas,parapets and similar locations, finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165

M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L providing cement concrete type B1, 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills,steps, bed blocks, holdfasts and like including weathering, slightly rounded or chamfered angles and throating incl demoition of old cemnt concrete complete all as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat white wash on ceilings complete all as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat oil bound distemper complete all as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of Oil bound distemper on ceilings complete all as directed.

M&L preparation of old plastered surface and applying one coat of ACE exterior emulsion paint on walls all as specified and as directed.

S&F in repairs 100 mm power coated aluminium butt hinges fixed in position with screws complete all as directed

S&F in repairs 150 mm long power coated aluminium peg stay fixed in position with screws complete all as directed

S&F for powder coated [thickness of powder coating not less than 50 micron], aluminium window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, aluminium fittings such as 100mm size handles 2 Nos,100mm butt hinges 2 nos, 150 mm long peg stay one no, in each shutters including taking down of old shutters complete all as specified

S&F in repair electronic urinal of size 425x 410 x 645mm neutral integrated AC/DC with power source complete all as directed Make: Parryware code C0588 or Equivalent in Jaquar /Hindware

S&F 2 mm thick stainless steel 304 grade name plate of size 150 x 300 mm with retro reflective letters (Size of letter exc 10 cm but nexc 15 cm and Qty exc 10 nos but nexc 15 nos, as per reqirement at site) and fixed with SS studs on walls including dismantling old existing name plate complete all as specified and directed.

Taking down carefully copper/alluminium point wiring light, fan, sockets or power includind all fittings and accessories complete and making good disturbed surface of walls and floors etc.

M&L for Point wiring complete with and including 1.5 sq. mm (nominal area) single core multi stranded HRFR copper conductor PVC insulated unsheathed cable 1100 volts grade ISI marked drawn through in and including concealed non metalic rigid PVC conduit with accessories such as bend ,tees, junction boxes etc. suitable modular boxes for mounting fittings like modular switches, modular sockets and fan regulators etc with modular sheet covers including one run of 1.5 Sqmm PVC insulated and unsheathed multi strand HRFR copper conductor as green colour earth wire and connected to common earth dully complete all as specified and directed for the following:-

one light/fan point controlled by one switch

one 3 pin socket outlet 5A on independent board

one 3 pin socket outlet 5A only on same board.

All as per item 134 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded ( multistrand ) copper conductor cable for 3/6 pin socket outlet 15 amp on one independent board.

All as per Srl item No 134 here-in-before but with 4 Sqmm multistranded PVC insulated unsheathed copper conductor HRLS grade including 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dully concealed in wall, suitable metal flush box for fixing of switch sockets including suitable size modular plates and necessary electrical connections,modular type 4x5 Amps, 05 pin multipurpose switch & socket outlet & 1x 15 Amps multipurpose switch socket in one switch board complete all as directed. Note:- The above is considerd as one job and the Cost of 04 Nos of switch sockets of 5 Amps, 01 No switch socket 15 Amps with suitable size modular cover & frame/Plate of approved colour , Metal flush boxes of suitable type and size is deemed to be included in the quoted rate.

S&F Modular Switch one way 6 Amps, 1 module all as specified and directed.

S&F Modular Socket 2 module for 2 / 3 pin 6 Amp all as specified and directed.

S&F Modular Switch one way 16 Amps, 1 module all as specified and directed.

S&F Socket 2 module 2in1, 3 pin, 6 and 16 Amp, complete all as specified and directed .

S&F ceiling rose PVC / polycorbonate isolated body 3 terminals with base plate ISI marked including taking down old unserviceable ceiling rose complete all as specified and directed..

S&F Modular Electronic fan regulator 120W including taking down old unserviceable fan regulator complete all as specified and directed.

S&F Exhaust fan 230V 50 Hz 300mm sweep with louvers including taking down old unserviceable exhaust fan complete and depositing old exhaust fan in MES store all as specified and directed.

S&F Ceiling fan 230V 50 Hz 1200mm sweep 5 star rated energy saver including taking down old unserviceable ceiling fan complete and depositing old ceiling fan in MES store all as specified and directed..

S&F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=20W, luminaire lumen >2000 lm, system efficiency of > 100 lumens/W, LED Make : Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 degree C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L7O criteria, multi stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification including taking down old unserviceable light fitting of any description complete all as specified and directed. Make:- Wipro Model No. LL20-281-XXX-65AL1 or Havells Cat Part No. ENDURALINEARNEOBU20WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj

S&F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=10W, luminaire lumen >1000 lm, system efficiency of > 100 lumens/W, LED Make : Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 degree C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L7O criteria, multi stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification including taking down old unserviceable fitting of any description complete all as specified and directed. Make:- Wipro Model No. LL20-111-XXX-65-NE or Havells Cat Part No. ENDURALINEARNEOBU10WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj

S&F 2ft x 2ft recess mounted full panel LED luminaire with white powder coated housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser , in built electronic driver duly wired up to terminal block, power consumption< 36W, luminaire lumen > 3500lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, colour temp -5700K, Ingress protection IP 20, , driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 500C, power factor >0.95, THD < 10% , surge protection in CM -3 KV, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification including taking down old unserviceable light fitting of any description complete all as specified and directed. Make:- Wipro Model No. CRCO10R038HP57GL1 or equivalent

S&F LED mirror light 7 watts including taking down old unserviceable light fitting of any description complete all as specified and directed. all as directed Make: Crompton model no. LCL-07-CDL OR Equivalent

S&F LED 40W suitable for pole dia upto 65mm post top made in case aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection including all fixing accessories like flexible cable 3 x 2.5 sqmm with connector etc and taking down unserviceable light fitting complete all as directed. Model No.CELESTA CAT Part No.BGCL 40 W LED of Bajaj or equivalent in Havells/Philips/Wipro

S&F full glow, (4 ft) luminaire, glare free and provision of cable from ceiling rose to light fitting including taking down unserviceable light fitting complete all as directed. Make :- Philips model No. RC380B LED32S-6500 L120W 30 PSU OD or techno equivalent in WIPRO / HAVELLS .

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 25 sq.mm 4 Core including taking out old unserviceable cable complete all as directed.

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 35 sq.mm 3.5 Core including taking out old unserviceable cable complete all as directed.

Supply & laying LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of 50 sq.mm 3.5 Core including taking out old unserviceable cable complete all as directed. Make for item Nos.151 to 153: HAVELL'S/ UNIVERSAL/ CCI/ GLOSTER/ KEI/ POLYCAB/ KEC INTERNATIONAL (RPG)

Supply and laying 40 mm bore GI tubing light grade in trenches for protection of cable at road crossing including taking out old unserviceable pipe complete all as directed.

Material and Labour for cutting existing BT road/PCC of size 45cm x 60cm for taking out/laying of underground cable and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and directed.

Excavation in trenches,n exc 1.5 m wide and n exc 1.5m in depth for laying of UG cable in soft/loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc 50 metres depositing where directed at a level n exc 1.5metres above stating point

M&L river sand for filling in trenches below and around UG cable for cushioning of cables complete all as specified and directed

M&L for laying in trenches fly ash bricks of size 23 cm x 11.5 cm x7.5 cm complete all as specified and as directed.

S&F LED street light luninaires 60 Watt with pressure die cast aluminium housing , Heat resistant toughened glass with frame and IP 66 protection including taking down old unserviceble fitting of any type complete all as directed. Make: Crompton Cat part No. LSTP - 60 -CDL /Equivalent in Philips/Havells

S&F LED flood light 250 Watts IP-65 complete all as speciifed and directed. WIPRO cat Part No : LF20-342-060-57-G2 or Equivalent including taking down old unserviceble fitting of any type complete in Philips/Bajaj/CG

S&F cable 3 core PVC insulated unsheathed multistranded copper conductor of size 2.5 Sq mm in replacement passing through PVC conduit from junction box to fitting incl PVC conduit including taking out old unserviceable cable complete all as directed.

S&F cable 2 core PVC insulated unsheathed multistranded copper conductor of size 2.5 Sq mm in replacement passing through PVC conduit from junction box to fitting incl PVC conduit including taking out old unserviceable cable complete all as directed.

S&F Master LED tube integrates LED light source (with frosted cover into traditional linear fluorscent from delivering 50% energy saving) including taking down existing tubelight & electronic ballast complete all as directed. Make : Philips model No. MAS LED tube 1200mm 18W865T8I or techno equivalent in WIPRO / HAVELLS

S&F SP&N sheet metal enclosure 240 V with atwo pin and earth plog and sicket with one singal pole MCB 20 Amps including taking down unservicable sheet metal enclosure complete all as directed

S&F plog top 16 Amps,3 pin 230 V complete unservicabal including taking down unservicable plog top complete all as directed

S&F plog top 6 Amps,3 pin 230 V complete unservicabal including taking down unservicable plog top complete all as directed

S&F Ding Dong bell AC 230 V complete unservicabal including taking down unservicable bell complete all as directed.

S&F Electronic voltage stabilizer of 5 KVA capacity (suitable for wall mounted) for automatic operation, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% including taking down unserviceable stabilizer complete all as directed. Make - V-GUARD / KEELINE / BLUE GUARD

S&F 4 pole MCCB 630 Amps 50Hz 415 volts with a rapturing capacity 25 KA including taking down unservicable MCCB complete all as directed Make: ABB (T-Max)/ SIEMENS(3VT)/ LEGRAND (DPX)/ L&T (D-Sin)/ SCHNEIDER (NSX) CONTROL & SWITCHGEARS/ HAVELLS

S&F lamp holder, PVC/poly carbonate type with back plate suitable for batten fittings complete including taking down unserviceable lamp holder complete all as directed

S&F Surface mounting Metal flush box 1/2 module 3 module including 3 modules inner plate & outer cover and taking down unserviceable Metal box complete all as directed

S&F Surface mounting Metal flush box 6 module including 6 modules inner plate & outer cover and taking down unserviceable Metal box complete all as directed

S&F surface mounting Metal flush box 8 module including 8 module inner plate & outer cover and taking down unserviceable Metal box complete all as directed

S&F 3 pole MCCB 100 Amps 50Hz 415 volts with a rapturing capacity 16 KA including taking down unservicable MCCB complete all as directed

M&L for distribution board made of sheet metal SPN 8 way with 200 Amps rated bus bar with metal door including taking down unserviceable distribution board complete all as directed

M&L for distribution board made of sheet metal TPN 4 way with 200 Amps rated bus bar with metal door including taking down unserviceable distribution board complete all as directed

M&L for MCB TPN 63 Amps 415 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed

M&L for MCB SPN 40 Amps 240 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed

M&L for MCB SP 06 to 32 Amps 240 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed

M&L for taking down ceiling /exhaust/pedestal/wall mounted fans of different makes and sizes for repairs and installing in its original position after repairs including provision of cable from ceiling rose or connecter to fan complete all as directed.

M&L for Dismantling of fans for rewinding with super enameled copper wire as per existing gauge /number of turns including heat varnish, overhauling and testing complete all as directed for the following sizes:

Ceiling fan 1200 / 1400 mm

Exhaust fan 230 /300 mm

Pedestal/Wall mounted fan 400 mm

S&F following spare parts for ceiling /exhaust fans of different makes and sizes and taking down unserviceable spare parts complete all as directed.

Copper Bush

Ball bearing NO.6201

Ball bearing No. 6202

Ball bearing for exhaust fan & pedestal fan Make for item Srl No.184.01 to 184.04: SKF/TATA

Condensor 2.5 MFD

Condensor 3.15 MFD Make for item srl No. 184.05 & 184.06: Universal /Capco

Rubber bush

Canopy

Condensor stand

GI nuts, bolts and washers

Ceiling fan blade 1200 mm.

Exhaust fan blade 230/300 mm

M&L for taking down geysers of different makes and 25/50 ltrs capacity for repairs and installing in its original position after repairs with new bolts, nuts and washers complete all as specified.

M&L for taking out copper inner shell from the geyser 25/50 ltrs capacity of any make, arresting leakage by copper braxing including cleaning , provision of new rock wool and testing complete and refixing all parts in same position complete all as directed

S&F following spare parts for geysers and taking down unserviceable spare parts complete all as directed

Thermostat suitable for geyser 25/50 ltrs capacity.

PVC hose for hot /coldwater 450mm long with brass end nuts (ISI marked) suitable for 15mm dia GI tubing complete.

Heating element 2 KW ( Horizontal/Vartical)

Indicating lamp (Red/Green)

S&F 4 pole MCCB 100 Amps 50Hz 415 volts with a rapturing capacity 16 KA including taking down unservicable MCCB complete all as directed

S&F 4 pole MCCB 250 Amps 50Hz 415 volts with a rapturing capacity 25 KA including taking down unservicable MCCB complete all as directed

M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 4 sqmm (nominal area) 1100 volts grade multistranded HRFR copper conductor with one run of 2.5 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 25mm outer dia complete and accessories of suitbale size as required. Note : Two runs of 4 sqmm & one run of 2.5 sqmm cable and one run of conduit shall be measured and paid as one length.

S&F 2KW geyser 25 ltr water storage capacity and fixing in position including taking down old unserviceable geyser complete and depositing old geyser in MES store all as speciifed and directed. Make : Cat part no : Arno Neo - 1525 of Crompton Greaves or equivalent make of BAJAJ/HAVELS

S&F rigid non-metallic PVC conduit of 40 mm dia inclusive of all bend, tees, elbows, reducers, bell mouth tube ends and fixing accessories such as coupllers, lock nuts, saddles, pipe hooks etc including taking down old unserviceable pipe complete all as specified and directed. Make: Prince/Kissan/Sudhakar/Finolex

S&F rigid non-metallic PVC conduit of 50 mm dia inclusive of all bend, tees, elbows, reducers, bell mouth tube ends and fixing accessories such as coupllers, lock nuts, saddles, pipe hooks etc including taking down old unserviceable pipe complete all as specified and directed. Make: Prince/Kissan/Sudhakar/Finolex

S&F 2 KW solar water heater element incl taking down old solar water heater element complete all as specified.

M/S PAVANI ENTERPRISES

Ravi Enterprises