Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.3 L+₹49,690 (1.31%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹38.8 L+₹99,665 (2.64%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹39.7 L+₹1.9 L (5.02%)Rejected-Finance B XXIII 56 A PREM NAGAR SAINGARGH PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹39.9 L+₹2.1 L (5.66%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹38.8 L
EMD Value
₹77,500
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari Jammu
ADDITION/ALTERATION TO SECURITY INFRASTRUCTURE AT TIGER GATE AT MIL STN JAMMU
2022_MES_552798_2
GEJM-45/2022-23
Open Tender
Civil Works
Item Rate
180 days
Satwari Cantt
D Class Cat a i b i
9 documents required · 9 mandatory
₹500
GE Satwari
₹77,500
Yes
9 Feb 2023
1 Nov 2022
24 Nov 2022
1 Nov 2022
22 Nov 2022
16 Nov 2022
Amount
Surface excavation in any type soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified.
Excavating in trenches, exc 1.5 m wide and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out complete all as specified.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.
Removing excavated material exc. 250m & n. exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point cpmplete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified.
M&L Cement concrete Type D2, 1:4:8 ( 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified.
M&L Reinforced cement concrete (design mix) M-25 ( 20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L formwork to sides of concrete foundations,(Rough finished surfaces) concrete footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Ditto all as above item No 10 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L steel work in tubular/square pipe trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as shown in Drg.
M&L rolled/square/round pipe sections as in main and cross beams, vertical post, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality-A complete all as specified.
M&L plates (plain) channels, square cut or notched, gusset plates, base plate (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A complete all as specified.
S&F mild steel bolts. (exc 20 mm and n. exc 25 mm) purpose made with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long complete all as specified.
S&F mild steel screw bolts dia 16 mm to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified.
M&L Mild steel, plain, black sheet in wall cladding,(Thickness of sheet in 1.25mm) steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified.
M&L pre-painted galvalume aluminum zinc coating ( AZ-150) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in curved roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
M&L pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
M&L 20mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10 mm thick rendering CM 1:4 complete complete all as specified.
Excavating over areas, hard/dense soil n exc 1.5 m deep and getting out complete all as specified.
M&L Hard core, broken to gauge n exc 63 mm laying in 150 mm layer and compaction complete all as specified.
M&L Cement concrete 150 mm thick, type D- 2, 1:4:8 (40mm graded aggregate) laying as floor complete all as specified.
M&L Cement concrete 150 mm thick, type B- 2, 1:2:4 (20mm graded aggregate) laying as floor complete all as specified.
M&L forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ thickness of the slab 150 mm.
M&L Preparation of new/untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified.
Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.
Excavating in post holes any type of soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified.
M&L providing cement concrete type B1 1:2:4 ( 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).
M&L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
Supply and fixing LED Flood light 70 Watt 230 Volt AC Outer type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with fixing arrengenment including clamps any type and size, nuts, bolts, washer and fixing on chanels, floor, poles etc and with driver and lamps all as directed.
Supply and fixing LED Flood light 200 Watt 230 Volt AC Outer type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with fixing arrengenment including clamps any type and size, nuts, bolts, washer and fixing on chanels, floor, poles etc and with driver and lamps all as directed.
Supply and fixing LED post top latern Type 20 Watts 230 Volts Acouter type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistanct complete with drivenand lamp complete and fixing by clamp , anchor fasner and nuts, bolts with including grouting 40 mm dia pipe in wall, piler and as per site requirenment complete all as directed.
Supply and fixing LED light fitting 1x18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.
Supply and fixing in replacement of multi core round PVC insulated copper conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 1.5 Sqmm, two run from junction box to light fitting inside/outside complete all as specified.
Supply and Fixing thermoplastics polystyrene/polycarbonate enclosure, shock proof, IP65( weather proof), rust proof, dust proof, water proof, internally embedded gasket with provision for all side cable entry through glands(IP-65) and/or grommets(IP-55). Size of enclosure: ( 250 x 180 x 110 ) mm With suitable connecters for /1Ph loop in loop out and branch out vibration proof connections and fixing on PCC/ steel poles with 25x3mm thick 02 Nos of clamp with nuts and bolts and washers and proper thimbling. Make : Hansel/HPL/Sintex
Supply & Fixing 25 mm dia rigid non-metallic PVC conduit medium grade ISI marked in wall/ceiling/roof /trusses / angle of boxes (junction/ terminal), tees, bends, elbows, reducers, bell mouth, tube ends and fixing by clamps with accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed
Supply, installation, testing, commissioning of high mast complete motorized alongwith wiring from MCB to flood light fittings, foundation, excavation, return filling, RCC/PCC including form work, foundation bolts, nuts, washers, anchor plate and template etc as per following specifications. Make : Bajaj /Philips/Crompton/GE
(a) General specifications (i) Height of mast - 16 mtrs, (ii) Material of construction : BS EN 10025/IS 2062, (iii) Thickness of material - Top section 3mm, bottom section 4mm, (iv) Cross section of mast (number of sides)-20 sided polygon, (v) Length of individual section - Top sec : 8.35 mtrs, Bottom sec : 8.35mtrs, (vi) Diameter - Base dia : 460mm, top dia : 150mm, (vii) Types of joints - stress slip fit joints. (viii) Length of overlap-1.5 times the dia of intersection, (ix) Metal protection treatment - Hot dip galvanised as per IS 4759/IS 2629, (x) Thickness of galvanisation - average 70 microns, (xi) Size of door opening at base of mast - 1200mmx 300mm, (xii) Types of locking on door panel - Close fitting door with allen key locking with suitable reinforcement to avoid buckling at base of mast. (xiii) Lightening protection finial - GI single spike of length 1200mm, (xiv) Size of base plate - Dia : 670mm, Thickness : 30mm
(b) Dynamic loading as prevailing at site (i) Max wind speed : 180 Km/hr, (ii) Number of foundation bolts - 08 Nos, (iii) PCD of foundation bolts - 590mm,(iv) Dia of foundation bolts - M30, (v) Length of foundation bolts - 850mm
(c) Lantern Carriage (i) Material of construction - 40 NB /ERW CLASS B-MS PIPE, (ii) Dia of lantern carriage ring-800mm (ID), (iii) Construction - 8 arms welded, (iv) Number of joints - 2 segments, (v) Load carrying capacity - 06 luminaries, symmetrical
(d) Winch : (i) Number of drums per winch- double drum, (ii) Gear Ratio - 50:1, (iii) Capacity - SWL750 Kgs, (iv) Method of operation - Motor with manual, (v) Lubrication arrangements - Self Lubricating in permanent oil bath, (vi) Type of lubricant - SAE 90/140
(e) Stainless steel wire rope (i) Grade - AISI 316, (ii) Dia of SS rope - 6mm, (iii) Construction of SS Rope - 7/19, (iv) Number of SS Ropes - 03 Nos of 6mm for lantern carriage, 02 Nos of 6mm for double drum winch, (v) Thimbles and terminals - Provided, (vi) Breaking load capacity - 2350 Kgs per SS wire rope. (f) Trailing cable (i) Type - Flexible copper 5 core 2.5 sqmm FRLSH 02 Nos, (ii) Material - EPR insulated PCP sheathed/PVC, (iii) Make - IS approved, (iv) No of circuits per mast - Two (g) Power tool (i) Model - Integral, (ii) Capacity (HP) - 1.5 HP, (iii) Number of speed - Single speed, (iv) Reversible / non reversible - Reversible, (v) Input supply - 415 Volts/240 Volts, (vi) Torque limitor - Withmechanical trippping facility. (h) Aviation light :-LED aviation light 6W luminaries integral LED light comprising of polycarbonate enclosure alongwith suitable fixing arrangements with rolled steel equal angle of 25 x 25 mm for making structure suitable for aviation obstruction light including welding, bending cold/hot drilled holes for nuts, bolts and washers of any shape or size as required base all as speficied and directed by Engr-in-Charge. Note :- Cost of Excavation, return filling, PCC/RCC inclduing form work, foundation bolts, nuts, washers, anchor plate, and template, foundation drawing to be submetted by contractor as per manufacturer and as per wind speed of air drawing to be submitted complete all as specified and directed and no extra cost will be deemed to be included in the item rate and no extra will be paid to the contractor.
Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 75 cms made out of 40x40x4 mm angle iron grouted on brick masonary platform upto 30 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- .Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be approved by CPRI width of the panel not less than 45 cms. (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) MCB's should be connected with extensions terminals at both side (incoming and outgoing).
Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes.
Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 6 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes.
Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 4 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes.
Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.
Supply & laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specifieds and directed.
M &L for cutting of bituminous road / floor for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed by Engr-in-Charge.
Material and labour for GI pipe light grade for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40mm dia complete all as specifieds and directed.
Material and labour For Earthing complete with galvanized steel earth plate electrode 60cm x60cmX6 mm thick buried directly in ground to a depth not less than 3 mtr below normal ground level with top edge of earth plate at a depth not less than 2.25 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal, magnicium sulphate, common salt and connected with in and including GI strip of size 32x6mm by means of stainless steel bolts, nuts, check nuts and washers connected to Transformers / panels. 40mm bore of GI pipe (light grade) from earth plate up to testing point for protection of GI strip and 20 mm bore GI pipe (medium grade) with wire mesh and funnel for watering including necessary excavation and earth work, (in any type of soil) PCC chamber (1:3:6) type C-2 with RCC cover with suitable size of handle made out of 8mm dia MS bars and angle iron 40 x 40x 3mm frame for cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part-I 2009 complete all as specified. RCC cover shall be painted with red paint over a primer coat and the rate include in the unit rate of item complete all as specifieds and directed.
CELMAC REGD
M/S PARAMJEET SINGH
SATISH AND CO
M/S VED PAUL MAHAJAN
ANIKET TRADERS
Harsh Electricals
M/S ANIL MAHAJAN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .