REPAIRS/ REPLACEMENT TO FLOORING OTHER RELATED B/R WORKS IN GRC, CHILDREN PARK, SM LINE AND CERTAIN OTHER AREA UNDER AGE B/R-I KAMPTEE

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per item No 2 above but half brick wall in CM 1:4 complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces including finished fair and even (in patches) complete all as specified and directed.

M&L for rendering 15mm thick in cm 1:4 on brick or concrete surfaces even & fair smooth, using water proofing liquid compound and without using extra cement (in patches) complete all as specified and directed. Note: water proofing liquid will be measured and paid separately.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of primer and a coat of wall care putty etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for providing and applying Heritage Regular Granules homogeneous exterior wall textured surfce coating in mono or multi colour shades manufacture by "Backlite Hylam Limited" or equivalent, consisting of two components of dry regular granules (25 Kg pack) made of 92% silika particles coated with fade resistant pigment (primarily inorganic) and a 100% acrylic polymer bonding agent (05 Kg pack) with applied thickness of coating between 0.8 to 1.2mm in single coat on a curved even and smooth plastered surfaces without keying. Apply of coating on primed substrate uniformly, without voids with the help of trained applicator in accordance with the instructions of manufacturer and as per the direction of Engineer-in-Charge. It also inclusive of priming the surface as per manufacturerer's instructions.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors/ wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors/ wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

All as per item No 13 above but as in skirting/ dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L for coloured/ printed glazed ceramic tiles 300x450x6 to 7mm thick, in floors/ walls skirting/ dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for light/dark shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 Sqm in floor/ wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 16 above but as in skirting/ dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in laid bedded and pointed in any mortar floors, aprons etc and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for pre-polished machine cut Kota stone slab flooring 18-25 mm thick over cement 20mm thick screed bed or bedding in CM 1:6 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/ shelves over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as specified and directed.

S&F for green/white marble 18-20mm thick of, machine cut as in riser, dado platform etc set and jointed in white cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement including cutting, polishing (mirror type) or use in shelf and cupboard etc complete all as specified and directed.

S&F acrylic corrugated/ plain sheet 3-8mm thick of any colour fixed as in roof covering/ cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing complete Fe 410 -W(Gde-E- 250) quality A complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F solid PVC frame of size 50 mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube opening as per drawing complete all as specified and directed.

S&F PVC factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with wood free EPS 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on sheet on the front face & 2mm colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door wire gauzed i.e. panel will be of wire gauze both side pre-laminated PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded wood grain colour PVC 'C' channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repair 18/19mm Prelaminated particle board, interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber/PVC frame work with necessary beading etc complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/blankets any thickness, including cover fillets/ GI SNAP GRID/ POP ceiling etc complete all as specified and directed.

S&F 5mm thick colour/ printed designer PVC wall/ ceiling sheet instips and channel feathered at the edges for fixing on solid PVC wall/ ceiling lining insulated PVC wall/ ceiling lining and solid PVC partition inclusive of solvent cement and fixing arrangements (suitable fillet, H-joint, U-end, J-edge, External corner and internal corner, horizontally, vertically or at any height and angle) at site, complete all as specified and directed. Note:- PVC wall/ceiling lining should be reversible, waterproof, washable, rib-reinforced, rigid, standard metal.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed with screw complete all as specified and directed.

S&F 100mm hasp & staple safety type stainless steel with mild steel hing pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F continuous (piano) hinges, width of flaps(when open in 30mm) mild steel, bright finish or electro-galvanised complete all as specified and directed.

S&F floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm complete all as specified and directed.

S&F Deco Door Seal (94Cm/ 36.5" or door width size) Aluminium Plate with Nylon Brush Ivory Matt complete all as specified and directed.

S&F framed work such as grills, etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed.

S&F brass mortise lock (4 levers), vertical type, size 100mm long including all fitting arrangements complete all as specified and directed.

S&F heavy duty double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed.

S&F for sheet glass 5.50 mm thick tinted quality and glazing exc 0.50 sqm in each panel complete all as specified and directed.

M&L for 10 to 12mm thick toughend tinted/ plain glass fixed to door or as partition or any other location including with brackets, supports, handles, lock, bottom machine and other accessories as required design complete all as specified and directed.

M&L for 7-8.3mm thick laminated wooden flooring (including with all fixing arrangements) high density core grade AC4 (As per classification EN 13329) advance high dencity click system fixed over rubber sheet cushioning complete all as specified direced by manufacturer's instruction complete all as specified and directed.

S&F pre laminated particle board 12mm thick exterior grade decorative choice 1mm thck lamination both sides with fixed with necessary Aluminium beading complete all as specified and directed.

S&F 100mm long stainless steel butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 100mm long butt hinges med weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12mm dia fixed complete all as specified and directed.

S&F 250mm long Aluminium sliding door bolts, bolt type bolt 16mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F mild steel door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S&F 100mm long fancy type butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane in each pane including taking down old broken glasses complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square not exc 0.5 Sqm in each pane including taking down old broken glasses complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F pillar cock swan neck 15mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7814 or equivalent

S&F in repairs chromium plated shower rose with or without swivel joints of 150mm square including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair Stop valves/ angle cock, cast copper alloy, screwed down, fancy type chromium plated high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair two way angle cock, cast copper alloy, screwed down, fancy type chromium plated high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Urinal spreader of brass chromium plated for fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S&F in repair health faucet of 15mm bore brass chromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make: Prayag cat no BEA-40.

S&F grating doom with/without waste hole 125mm dia of chromium plated complete all as specified and directed.

S&F in repairs waste fittings, 32/40mm brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed.

S&F in repair PVC low level flushing cistern (dual flush) white slim line 10 ltrs capacity including PVC bend pipe, handle and float valve, brackets etc complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top) of 500ltr capacity, hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top) of 1000ltr capacity, hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 & not exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from mouths of circulating pipes etc complete all as specified and directed.

All as per item No 75 above but capacity of tank exc 1000 & not exc 2000 Ltrs complete all as specified and directed.

S&F in repair 15/20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min wt 15mm-142 gms/ 20mm-210g) complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 15mm bore galvanized steel tubes concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing or concealed etc., complete all as specified and directed.

All as per item No 79 above but 20mm bore complete all as specified and directed.

S&F in repair stainless steel draphary curtain roads 25mm bore with brackets/holders etc cut to length as reqd complete all as specified and directed.

Taking down eves gutter, gas pipe, sewage pipe and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings the accessories) complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 75mm bore complete all as specified and directed.

S&F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S&F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S&F cast iron floor trap with grating 100mm dia including jointing to waste pipe fixed in PCC type B-I, 1:2:4 etc complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl ISI marked 110mm bore complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince or equivalent.

S&F cast iron Nahani trap with grating 100mm dia including jointing to waste pipe fixed in PCC type B-I, 1:2:4 etc complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and directed.

Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and disposal of rubbish outside of MD land complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 20mm graded stone aggregate) as in sub base, foundation etc complete all as specified and directed.

M&L for synthetic flooring on PCC (1:1½:3) 100 thick trimix concreting, electricity vibration with necessary demolition of existing surface to out door badminton / volleyball / handball / tennis and basket ball court with providing ultra cushion standard comprising of total 8 (eight) layers (min 8 layers of cushion) of the following specifications to be laid over 5.50 mm thick rubber layer after preparation of new concrete surface:- PRIMER: 100% synthetic court of Acrylic (KDF) based emulsion to improve bond of acrylic court system to the concrete or asphalt surfaces. RESURFACER: 1 synthetic court of Acrylic Resurfacer 367-30 for filling and smoothing asphalt or concrete surfaces in preparation for synthetic court of Acrylic ITF Approved Muiltysports court system. And also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating CUSHION COAT: 2 Layers of synthetic court of Acrylic (KDF) cushion for asphalt or concrete surfaces in preparation for synthetic court of Acrylic (KDF) ITF approved system. ULTRA CUSHION COAT: 2 Layers of synthetic court of Acrylic(KDF) cushion for asphalt or concrete surfaces in preparation for synthetic court of Acrylic ITF approved system. PRECOAT: 2 layers of synthetic court of Acrylic (KDF) based textured Basketball topcoat. Ideal for color coating Muiltysports courts and other sport pavement surfaces. OVERLINE: 100% synthetic court of Acrylic (KDF) based high hiding line paints. including necessary painting to existing poles. The work will be carried as per manufacturer's instruction for out door floors and as directed by GE.

M&L for chequered tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for 50mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade etc complete all as specified and directed.

S&F linoleum, plain coloured, laid dry in floors including stretching, making good to the exsiting floor for laying the material, cutting and fitting complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping/ roof kerbs or mud stops, steps etc rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate), as in foot path, pavement, plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.31,605.00]

Meet Road Lines

Bidder Name

Meet Road Lines

M/s B S Jain