GE863/EWS-T-41 OF 2022-23

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc, complete, all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course, complete, all as specified and directed.

M & L for machine cut kota stone slab flooring 20 to 25 mm thick over and including 15 mm thick screed bed laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and morror polishing, complete, all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing as in skirting/dado over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, including cutting, rubbing and mirror polishing, complete, all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick,watered and rammed to a true surface, complete, all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-1 using 20 mm well graded stone aggregate as in plinth protection and finished even and smooth without using extra cement , complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

M & L for rendering 15mm thick cement plaster on fair faces of concrete surfaces in CM 1:4 incl finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of cement base paint over a coat of chalk whiting on plastered surface including preparation of newly plastered surfaces, complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames). including removing from site, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) including removing from site, complete, all as specified and directed.

S&F 1.25 mm thick pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specified and directed.

S&F 1.25 mm thick pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete, all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats, complete, all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete, all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete, all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer,complete, all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt 12 mm dia incl minimum of 6 bolts annd nuts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified and directed.

S & F 125mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete, all as specified and directed.

Hacking Out Old Broken Glass (Any Thickness,Size,Quality Or Description) from metal frame including punching or drilling old glazing pins, complete, all as specified and directed.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.

S & F in replacement of Harrison rails of dia 20 - 22 mm, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete, all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed.

S&F anodised aluminium snap grid of size 605 X 605 mm frame work for false ceiling, complete, all as specified and directed.

S&F hangers 6mm dia G I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete, all as specified and directed.

M&L for Exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid/ 605 mm x 605mm (frame work for ceiling shall be measured and paid separately), complete, all as specified and directed.

ditto all as per item No 33 but except 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre , complete, all as specified and directed. Note :- 8 mm thick calcium silicate board obtain from item No 30

Dismantling fibre sheet in roof covering, complete, all as specified and directed.

S & F of 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete, all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position, complete, all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W, grade 250, Quality A, including cleats,distance pieces etc, complete, all as specified and directed.

Demolition of PCC block masonary built in cement mortar including all quions, arches,pillars etc but precast concrete block walling, complete, all as specified and directed

M &L for pre-cast cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint)., complete, all as specified and directed.

M&L for washing rubbing down and applying of two coat of cement base paint to old surfaces of walls, complete, all as specified and directed.

M&L for washing, rubbing down and stopping of distempered surface and applying one coat of Oil bound distemper to old surfaces of wall, complete, all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete, all as specified and directed.

M & L for One light point Wiring with PVC single core sheathed copper conductor cables 1.5 sqmm size FRLS with and including one run for neutral and for earthing connectivity of same size in PVC conduit for one fan point controlled by one switch, complete, all as specified and directed.

M & L for wiring of One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sqmm size FRLS with and including one run for neutral and one independent run for earthing connectivity of same size in PVC conduit complete, all as specified and directed.

M & L for One power point Wiring with PVC single core sheathed copper conductor cables 2.5 sqmm size FRLS in PVC conduit with and including one run for neutral and one independent run for earthing connectivity of same size in PVC conduit complete, all as specified and directed.

Supply and fixing in repacement of LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete, all as specified and directed.

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete, all as specified and directed.

S & F in replacement of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete, all as specified and directed.

S&F in replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten / angle fittings with and including 7 Watts LED lamp of approved make, complete, all as specified and directed.

S&F in repacement of Switch piano, flush type single pole, one way 5 Amp, complete, all as specified and directed.

Supply and fix in replacement of Socket outlet 2 in 1, 3 pin, 5 Amps, complete, all as speified and directed.

S&F in replacement of Switch piano, flush type single pole, one way 16 Amp, complete, all as specified and directed.

S&F in replacement of Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, complete, all as specified and directed.

Supply and fixing in replacement of miniature circuit breaker (MCB) SPN 32 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning, complete, all as specified and directed.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete, all as specified and directed.

Supply and fix Sheet in replacement of metal enclosure for DBs 8 way, double door, 240 Volt, with 200 Amps rates bus bar, complete, all as specified and directed.

Supply and fix in replacement of Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete, all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete, all as specified and directed.

M&L for Wiring for circuit/submain wiring alongwith earth wire in PVC conduit with 2x6.0 sq. mm + 1x6.0 sq. mm earth wire of FR/FRLS in PVC insulated copper conductor, single core cable in surface/ recessed as required, complete, all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core, complete, all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil, complete, all as specified and directed.

Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete, all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation, complete, all as specified and directed. Note. Compacted thickeness 18 Centimetre shall be measured and paid for the payment purpose.

M & L for brick sub class 'B' , size 230mm x 115mm x 75mm and laid flat in trenches prependicular to the length of cable as in protection of UG cables, complete, all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in hard dense soil, complete, all as specified and directed.

S&F in replacement of Tubes, 'light grade' 50 mm dia, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 28127.00 for old Materials as per Schedule of Credit.

Pankaj Builders

M/s Parmod Kumar

NIRMAL SINGH BHOGAL AND SON