Construction of Balance work of one room GPS Parol.

Amount

Brick work using common burnt clay building bricks in cement Mortar 1:6 (1cement:6 sand) superstructure above plinth level upto floor two level 2nd class bricks as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Centering and shuttering, including strutting, propping etc. and removal of form for:as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Flat surfaces such as soffits of suspended floors, roofs. Landings and the like (Floor etc. upto 200mm. In thickness)

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam launchings cantilevers, bressuers and lintels not exceeding and lintels not exceeding 1Mtr.in depth in all heights from floor.

Columns, pillars, posts and struts.( square, rectangular or polygon in plain)

Providing and laying cement concrete 1:1.5:3 (1cement:2:sand : 4 graded stone aggregates 20mm nominal size) reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar) t o give a smooth and even surface centering/form work and curing complete excluding the cost of reinforcement as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, bindings and placing in position complete upto floor two level.(Tor steel) as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Steel work welded in built up sections/framed work, ioncluding cutting, hoisting, fixing a position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, kadder, kg railings, brackets, gates and similar work as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing 40 mm thick double glazed shutters for doors, windows and clerestory windows using 2 number 4 mm thick float glass panes, i/c ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

6 mm cement plaster with cement mortor 1:3 as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor two level i/c arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Distempering ( two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and i/c a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also i/c preparing the surface even and sand papered smooth. . Priming coat with distemper primer.as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing 40 mm thick wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone as per direction of Engineer- in -Charge, including entire carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. aggregate.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeas per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Applying primer coat: with ready mixed pink or gray premier of approved brand and manufacture on wood work(hard and soft wood)as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm on wood work as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300X16 mm as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 150X10 mm as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

Providing and fixing aluminium tower handle, ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868), 125x10mm as per the direction of the Engineer-in-charge including entire carrriage of material within all leads and lfts and other incidentals . The rates are inclusive octrol, royality, Malkana, toll tax,sale tax or other taxes imposed by the Government.

RAKESH CHAND GOVT. CONTRACTOR