M/o Park (Annual civil maintenance work in Vedvan park sector-78) Noida.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. (DSR Code No.-11.26.1) AOR

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm (DSR-18/ Item Code No.-8.2.2.2) AOR

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (DSR Code No-8.3.2) AOR

Supply and fixing of Glass Fiber Reinforced Concrete ( GFRC ) Produced in accordance with PRE CAST INSTITUTE ( U.S.A) MANUAL 128 EDN 4 , conforming Jaali in approved size pattern , Design , thickness and colourMade by MRK GRC or Equivalent . The Jaali should be made from 53 grade white portland cement manufactured by J.K cement or equivalent having minimum compressive strength of 40 N / m Sqm , quartz, fine silica sand . \, Alkali resistant Glass Fiber manufactured by Nipon or Sant Gobin or owens corning or equivalent , super plasticizers and polymers manufactured by BASF , Sika MYK Schomburg or equivalent . The material casting should take place in Synthetic Rubber / FRP Mould manufactured by Reckli or equivalent . The Fixing of Jaali should be dry fixing i.e to be done with GI fastners , dash fastners , self - scerw and pins on MS frame or wall / RCC Providing and Fixing GRC Jali size L 4800 mm x W 2300 x 75 mm Bordar & 25 mm Pattern thickness Including loading ,unloding cartage all complete. As per design approved by Consultant & Engineer - incharge ( Aor)

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300xg.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar (1 cement 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR Code.No-16.90) AOR

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge (DSR Code No.-11.53) AOR

Supply and fixing of 15 mm thick wet pour insitu system gets applied in two layer, first layer is of black SBR having 9mm following by 6mm thick layer of EPDM granules, through recommended for jogging. Work includes supply and fixing along with cartage for leads and lifts as per site requirements for complete finishing of work as per the directions of Engineer-in-charge.

Steel work welded in built up sections/framed work i/c hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR Code No.-10.25.2) AOR

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (DSR Code No.-10.16.1) AOR

Hiring of Welding Set Running Time @ 6 Hrs (NSI-7.8.00)