REPAIR/MAINT OF VARIOUS WATER SUPPLY INSTALLATIONS UNDER AGE E/M-II, REPAIR OF PANELS, CABLES, EARTHINGS INCLUDING MISC REPAIR OF B/R ITEMS LIKE PLASTERING, CHAIN LINK FENCING, HARDSTANDING ETC UNDER AGE E/M-II IN GE (C) KHADKI.

Amount

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surface of walls, floors etc complete all as per the existing finish.

Material and labour for point wiring in casing & caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.

Description all as per Srl item No 2 above but point wiring for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Description all as per Srl item No 2 above but point wiring for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Material and labour for point wiring in PVC conduit of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.

Description all as per Srl item No 7 above but 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Description all as per Srl item No 7 above but 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Description all as per Srl item No 7 bove but for for one 6 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch in PVC conduit.

Supply and fix switch piano flush type single pole, one way 5 Amp.

Supply and fix switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 & 15 Amp flush type universal.

Supplying & fixing ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified and as directed .

Supply and fixing in replacement Stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified and as directed.

Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/Unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories incld. conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall including material all as specified and directed by Engineer in charge.

Material and labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 1.5 sqmm, 1100 volt grade conforming to IS drawn through and including New 20 mm PVC conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 1.5 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed.

Description all as per Srl item No 15 above but drawn through and including PVC casing & capping

Material & Labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade conforming to IS drawn through and including New PVC casing & capping and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed.

Removing of old main switch after disconecting the incoming and out going cables and supply and fix MCCB thermal magnetic release four pole 25 KA 63 Amps Make Legrand Cat No 420053 /L&T /ABB with one way metal inclosure Cat No 5078 01 /L&T /ABB and making conections of cables with suitable size nutbolt etc including making good the disturbed suface of wall including material complate all as specified and as directed.

Supply, fixing, connecting and testing in replacement of industrial earth plug & socket with sheet metal enclosure of IP 44 protection rating, electric driven, single phase including MCB 'C' series SP 20 Amps and supplied with neutral link complete all as specified and as directed.

Supply, fixing, connecting and testing in replacement industrial earth Plug & socket with sheet metal enclosure of IP 44 protection rating, electric driven three phase including MCB 'C' series TP 20 Amps and supplied with neutral link complete all as specified and as directed.

Disconnecting and taking down old distribution Box with MCB/fuse grip TPN/SPN DB 2 Way to 12 Way old type DB including taking out all cable connections of any description and in any position and making good the disturbed surface of walls, to match with the existing surfaces complete all as specified and directed by Engineer in charge.

Supply and fix, connecting & testing of VTPN DB of 8 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed. MAKE :- Legrand Cat.No. 5077 47 or equivalent in Schneider- Acti-9/ L&T-Exora. NOTE :- MCCB , MCB will be measured and paid separately under relevant item of this schedule.

Supply and fix, connecting & testing SPN DBs of 8 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed. MAKE :- Legrand Cat.No. 5076 11 orequivalent in Schneider/L&T. NOTE :- MCB will be measured and paid separately under relevant item.

Supply and fix, connecting & testing SPN DBs of 12 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed. MAKE :- Legrand Cat.No. 5076 12 or equivalent in Schneider/L&T. NOTE :- MCB will be measured and paid separately under relevant item.

Supply and fix ceiling fan of 1200 mm sweep 3 star rating including provision of cable from ceiling rose or connector to fan, anchor bolt for fixing of ceiling fan,ceiling fan rod at any height Complete all as specified & directed by Eng-in charge. MAKE :- Bajaj Cat part No. Sabse Tez EE03 251119 or equivalent to Crompton/Havells

Supply and fix exhaust fan (Metal body) AC single phase 230/240 V of size 300 mm sweep with louvres and provn of flexible copper cord from ceiling rose to fan including making hole in wall without making disturbed the good surface Complete all as specified & directed by Eng-in charge. MAKE :- Bajaj Cat part No: Bahar 70001 or equivalent to Crompton/Havells

Supply and fix exhaust fan (Metal body) AC single phase 230/240 V of size 450 mm sweep with louvres and provn of flexible copper cord from ceiling rose to fan including making hole in wall without making disturbed the good surface Complete all as specified & directed by Eng-in charge. Make :Bajaj Cat part No: Supreme Plus 70065 or equivalent to Crompton/Havells

Supply and fix exhaust fan (Metal body) AC single phase 230/240 V of size 600 mm sweep with louvres and provn of flexible copper cord from ceiling rose to fan including making hole in wall without making disturbed the good surface Complete all as specified & directed by Eng-in charge. MAKE :- Bajaj Cat part No: Bahar 70000 or equivalent to Crompton/Havells

Supply and fix Wall mounted fan 400mm sweep 230V, AC, SP oscilating swing type with all acceessories and fixing arrengement Complete all as specified & directed by Eng-in charge. MAKE :- Bajaj Cat part No.Neo spectrum Grey 250890 or equivalent

Supplying & fixing MCB 6 to 32 Amps, single pole and neutral, "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed.

Supplying & fixing MCB 6 to 32 Amps, single pole, 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed.

Supply and fixing sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one no MCB SP , 20 Amps , 230 volts complete all as specified and as directed.

Supply & fixing, LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. MAKE :- Crompton Cat part no-Bright Linea CCS-100-20-65-HL2-DP-NWH or technically and commercialy equivalent in Bajaj/Havells

Supply & fixing, CRCA housing box LED Type luminiare suitable for and including 2x20 W 4 feet long complete including tube rod & connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. MAKE :- Crompton cat part No IS 340 NWH or technically and commercialy equivalent in Bajaj/Havells

Supply and fixing at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge. MAKE :- Cat Part No SLE HB 150W COMET NEO-N Surya or technically and commercialy equivalent in Bajaj/Havells NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.

Supply & fix LED Street light/Bldg security light 90W including making electrical connection to the fitting with Suitable size of service wire . MAKE :- Cat Part No. TRP-411-90-57-SL-GL-NSG of Crompton Raptor Neo or equivalent

Supply and fix LED Flood light 100W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge. MAKE :- Cat part No.Rover pro CFS-504-100-57-60D-SL-GL-NSG.Crompton or equivalent

Supply, installation, commissioning and testing Manual Changeover switch in sheet steel enclosure, capacity 250 Amps, 3 phase, 4 pole, 415 Volts AC Supply, fixed on wall or as directed, duly connetion incomer and outgoing connections all as specified and as directed. NOTE :- (i) Rates including installation, connections as per existing complete all as per directed at site. (ii) Rates including all necessary lugs, thimbles etc for connections of cable as per site requirement.

Description all as per item No 38.00 above but capacity 400 Amsp

Description all as per item No 38.00 above but capacity 630 Amsp

Material and labour for servicing of Motor Stater Control panle of motor capacity upto 75 HP with cleaning, checking all contactors, relays, control wiring and repair /replacment of unserviceable parts complete all as specified and as directed by Engr-in-Charge. NOTE :- (i) Cost of material like lugs, connectors, insulation tape is included in above cost. (ii) The quoted rate include the cost of painting of the panel with two coats of paints complete all as up to satisfection of Engr-in-charge. (iii) Cost of replacement of MCCB's, Contractors, relays meters not included in the scope of work.

Supply & fixing of MCCB 63 Amps 25KA, 3 Pole with Adjustable thermal magnetic release with Supply and Fixing of suitable rotary handle, spreader links etc in the control panels complete all as directed.

Supply & fixing of MCCB 100 Amps 25KA, 3 Pole with Adjustable thermal magnetic release with Supply and Fixing of suitable rotary handle,spreader links etc in the control panels complete all as directed.

Supply & fixing of MCCB 250 Amps 25KA, 3 Pole with adjustable thermal magnetic release with Supply and Fixing of suitable rotary handle, spreader links etc in the control panels complete all as directed. MAKE :- L&T/ABB/Legrand

Supply & fixing of MCCB 400 Amps 36KA, 3 Pole with adjustable thermal magnetic release with Supply and Fixing of suitable rotary handle, spreader links etc in the control panels complete all as directed. MAKE :- L&T/ABB/Legrand

Supply & fixing of MCCB 630 Amps 36KA, 3 Pole with Adjustable thermal magnetic release with Supply and Fixing of suitable rotary handle, spreader links etc in the control panels complete all as directed. MAKE :- L&T/ABB/Legrand

Supply and fixing PVC Insulated, copper conductor, single core, cable of size 50 Sqmm, laid in pvc pipe under PCC flooring/ alongwith wall etc including taking down old wire from stater to motor and connecting new cable all as specified and as directed.

Description all as per item No. 47.00 but of size 35 Sqm

Description all as per item No. 47.00 but of size 16 Sqm

Description all as per item No. 47.00 but of size 10 Sqm

Supply and Fixing for Power contactor Amps, 3pole AC, coil voltage 240 V, 95 Amps, with 2 NO& 2NC contacts suitable for motor control stater all as specified and as directed.

Supply and Fixing for Power contactor Amps, 3pole AC, coil voltage 240 V, 50 Amps, with 1 NO& 1NC contacts suitable for motor control stater all as specified and as directed

Supply and Fixing for Power contactor Amps, 3pole AC, coil voltage 240 V, 32 Amps, with 1 NO& 1NC contacts suitable for motor control stater all as specified and as directed.

Supply and Fixing Electronic Timer suitable for motor control stater, 3 phase, 415 V, 50 Hz, 3-30 Sec all as specified and as directed.

Supply and Fixing Electronic motor protection relay, 240V, 32-88 Amsp all as specified and as directed.

Supply and fix in repairs/replacement air termination at any height, single pointed, aluminium rod 19 mm dia and 600 mm long to be screwed and sturdily fixed to GI pipe of 40 mm dia with and including two no. sets of suitable size nut, bolt, washers (02 Nos.) all as specified and directed by Engr-in-Charge. NOTE : - PCC block and GI pipe required shall be measured and paid separately under relevant items of Sch 'A'.

Supply and fix in repair/replacement aluminium strip at any height of size 25 mm x 3.15 mm to procelain insulator with suitable saddleSupply and fixixing screws etc on roof or on wall (upto appx. 35 feet above GL) including of bitumen washer, nuts, bolts, etc. required to fix the strip on existing serviceable or new insulators complete all as specified and directed. NOTE :- Cost of suitable fixing jobs like drilling, welding, etc. required for fixing of strip and insulators on the any existing surface like PCC wall, asbestos sheet, etc. at site is deemed to be included in the quoted rate.

Description all as per item No 57 above but GI strip 32 mm x 6 mm.

Description all as per item No 57 above but copper strip 20 mm x 3 mm.

Test point terminal box of size 200 x 100 x 100 mm made out of 2 mm thick hot dip galvanised sheet drilled and screwed including 6 Nos 15 mm long hexagonal head screws complete with test point terminal block made out of Gun metal or Phosphorus Bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, etc complete all as specified and directed.

Supply and fix in replacement of vitreous china porcelain insulator with busbar support, white type to be fixed on wall or on roof (upto. 35 feet above GL) for fixing of GI or copper conductor earth continuity strip complete all as specified and directed. NOTE :- Cost of suitable fixing jobs like drilling, welding, etc. required for fixing of strip and insulators on the any surface at site is deemed to be included in the quoted rate.

Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 76mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. Area between pipes filled with Dry type chemical powder.The electrode pipes should be filled with 2x 25 kg bags of carbide based BFC earthing compound of product code BFC25SILVR. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. Connected to the earthing test point, Special high grade polymer compound Round earth pit with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Oms including testing complete all as specified Make U-Protect or equivalent NOTE :- IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

Material and labour for testing of lighting protection system & earthing of various Tech Accns in the presence of JE E/M/ Engineer-in-Charge by removing all earthing connections and the resistance of earthing (if any) & lightning protection network detailing the defective earthings & lightening protection systems. Items to be repaired/ to be renewed must be noted down during record of test of lighting protection system. The test results should be kept on record after repairs/renewal and have to be get signed from Engineer-in-Charge alongwith the signature of Contractor. NOTE :- (i) The earthing showing test result beyond 10 ohms are to be renewed and will be measured & paid for separately under relevant item of Sch 'A'. (ii). Earth Megger for measuring the resistance of each earthing and conncetd accessories is to be brought by the contractor.

Material and labour for earthing complete with 17.2 mm Copper bonded Earthing rod including Short circuit testing of minimum 40 KA at CPRI/NABL, 3 mtr long and having copper bonding thickness will be minimum 250 microns and copper bonded terminal size 130x50x5 mm terminal to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.5 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized copperearthing lead of 32x6 mm strip with minimum two Nos of copper nut bolts and connected to test point from earthing pit. Area between pipe and copper rod filled with Dry type chemical powder.The electrode pipes should be filled with 2x 25 kg bags of carbide based BFC earthing compound of product code BFC25SILVR. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. Connected to the earthing test point, Special high grade polymer compound Round earth pit with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 1 Oms including testing complete all as specified Make U-Protect or equivalent NOTE :- IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

Demolition of Brickwork or stone boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Material and labour for Brickwork with fly ashbricks, straight or curved on plan exc 6m mean radius, Modular bricks in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour rendering/plastering, 10 mm thick in cement mortar (1:6 )on fair faces of brick work or concrete sur face of wall complete all as specified and directed.

Material and labour rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth with sagol complete all as spd and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment and preparation of old plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper complete all as specified and as directed.

Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and directed.

Material and labour for complete removal of existing treatment and preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. NOTE :- (i) Filling of cracks, holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat.

Supply and fix in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet and single side prelam PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including dismantling complete all as specified and as directed.

Supply and fix in repair PLEATED pleased blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. Cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed.

Supply and fix in repair E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed..

Supply and fix in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or nmanual type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0, complete all as specified and directed.

Supply and fix in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle type, including dismantling, Thickness of laths in mm 1.0, complete all as specified and directed.

Taking down Refixing in the same opening after repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type/push pull or manual type with bevel gear box and crank handle type, including dismantling, Thickness of laths in mm 1.0, complete all as specified and directed.

Supply and fix in repair mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in doors or gates, roof structure of any size and section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing, including dismantling, complete all as specified by Engr-in-Charge

Dismantling asbestos cement (corrugated or semi corrugated) sheets/fibre sheet/ GI Sheet in roof covering complete all as specified

Material and labour 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with coach screw complete all as specified and as directed.

Material and labour Asbestos cement one piece plain angular ridge 6mm thick Fixed with coach screws complete all as specified and as directed.

Supply and fix 2 mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

Material and labour Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs,including taking down old u/s ventilator and making good the wall for fixing new window complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and as directed.

Taking down chowkats or frames with shutter without taking off shutters from frame of description n.exc 1.50 sqm each and removing from the site complete all as specified and as directed by Engr-in-charge.

Taking down Shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.

Supply and fix factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge.

Supply and fix providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2 mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO ‐ 9001 ‐ 2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick (5mmx5nos.) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

Supply and fix mild steel pressed handles,oval type stove enamelled of size 150mm long complete all as specified and as directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm size MS Light weight butt hinges for PVC door shutters and frames fixed with bright screwes complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plasterd or unplastered surfaces of walls/ceiling and applying two coat of oil bound distemper including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.

Supply and fix in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and directed.

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified and as directed.

Supply and fixin repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed by Engr-in-Charge.

Supply and fix in repair vitreous china wash basin white flat back size 580x450 mm including, pillar tap, 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

Supply and fix in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair, 20mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair, 40mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair,110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,including bend, Y etc, laid in trenches or in floors complete all as specified and directed.

Supply and fix in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Supply and fix in repair bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by Engr-in-Charge.

Supply and fix in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed.

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed.

Supply and fix in repairs 32 mm bore PVC waste pipe 1000 mm long of approved make suitable for WHB, Urinals etc all as specified and directed.

Supply and fix in repair health Faucet cera Model-F 8030105AB (ABS), with 1 meter SS Braided connection pipe or techno commercial equvalent complete all as specified and directed.

Material and labour for preparing new or previously untreated wooden/steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 3 layered rotational moulded polyethylene water storage tanks capacity 1000 lit in white colour (cylindrical vertical with closed top) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

Supply and fix 3 layered rotational moulded polyethylene water storage tanks capacity 500 lit in white colour ( cylindrical vertical with closed top) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

Dismantling of precast interlocking paver blocks / Chequred tiles laid dry of any description thickness & size complete all as specified and as directed.

Material and labour sand/crushed sand filling under floors or foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and as directed.

Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006, with grey cement and pigment, rubber moulded tiles M-35 Grade, as in floors, paving, path etc. complete laid over sand cushioning complete all as specified and as directed.

Material and labour 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base course complete all as specified and as directed.

Material and labour Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and as directed.

Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10 mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement, finishing even and smooth without using extra cement with and including water proofing treatment over RCC slab,complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying oil bound bitumen primer @ 0.3 kg/Sqm,over RCC slab, and providing and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and applying two coat of solar reflective aluminium paint on membrane surfaces @ 100ml/Sqm complete all as specified and as directed by Engineer in charge.

Supply only Liquid water proofing compound

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces.

Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and as directed.

Material and labour for cement conc 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete all as specified and as directed.

Material and labour for MS work conforming to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and directed.

Supply and fix, in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and as directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified and as directed.

Material and labour for plain, black mild steel sheeting in gates, 1.25 mm thick sheet welded or shouldered to angle iron frame and all as specified and directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders,walk ways; railings con forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling chainlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

Supply only Chain link fencing using 3.15mm dia GI wire mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed.

Supply and fix flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified and directed.

Supply and fix 10mm dia and over round bars cut to length bent to shape for stiffeners etc and similar work complete all as specified and directed.

Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed..

Material and labour for preparation of new steel and iron surfaces of any description over 10cms width or girth & applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

NOTE:- (a) Work to be carried out in bldgs/Sheds height of 15-20Mtr (Approximately) (b) Rate quoted by contractor shall be inclusive of dismantling and refixing of AC/GI (corrugated semi corrugated etc) sheets, Wired Figure Glass Light Ventilation at Valley gutters area in roof coverings which are mentioned. (c) The coated rate is deemed to be inclusive of materials required for perparation. Safety factors to be ensured while working at heights. (d) Contractor has to deploy a Engineering qualified Super viser and all inclusive in CA amounts.

Om Construction (BID ID -3276595)