Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC C 234 ADG P CHENNAI | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹35.3 L+₹2.3 L (6.88%)Rejected-Finance CHENNAI | L2 | Rejected-Finance BEING NOT L1 BIDDER | |
| 3 | L3₹35.4 L+₹2.3 L (6.91%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 BIDDER | |
| 4 | L4₹35.4 L+₹2.3 L (7.03%)Rejected-Finance 109 D ALLAI SALT COMPOUND OLD LAKSHMI THEATRE KRISHNAPURAM COONOOR 643102 THE NILGIRIS | COONOOR | THE NILGIRIS | TAMIL NADU | 643102 | L4 | Rejected-Finance BEING NOT L1 BIDDER | |
| 5 | L5₹35.7 L+₹2.6 L (7.83%)Rejected-Finance C 150 ADG P CHENNAI | L5 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹30.5 L
EMD Value
₹61,000
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDN/ALTN TO OR COOK HOUSE AT DSSC WELLINGTON
2022_MES_559620_1
8271/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹61,000
Yes
2 Dec 2022
22 Oct 2022
12 Nov 2022
22 Oct 2022
10 Nov 2022
5 Nov 2022
Amount
B/R PORTION Taking down existing water proofing treatment on the roof, cleaning with wire brush etc., and removing debris outside MD land all as specified and as directed.
Demolition of un-reinforced concrete on roofs, floors (other than ground floors), beams/ chajjas and similar suspended work complete all as specified and as directed.
M & L for providing, cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregates) in bed blocks including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.
M & L for providing 30 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) mixed with liquid WPC as per manufacturer's instruction, as in roof padding / levelling course kerbs, or chamfered on edges, finished even and smooth with using extra cement complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
M & L for 10mm thick screed bed or bedding layer of CM (1:3) mixed with liquid WPC as per manufacturer's instruction, when the padding concrete is green for floor finishes complete all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and as directed.
M & L for 3 mm thick APP modified waterproofing membrane, weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyester matt black finished weighing not less than 160 g/Sqm having softening point not less than 150 degree celcius longitudnal tensile strength not less than 300 N/Sqcm , 10 cm overlap and 15 cm for end laps , over a coat of bitumen primer @ of 0.20 Kg/Sqm and finishing with bituminious aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacturer's instruction and as directed. Note:-The work shall be carried out by authorised applicator of manufacturer.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.
M & L walling of random rubble uncoursed well bonded bedded and solidly hearted built in CM (1:6) and pointed the dressed surface with same mortar as the work process complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., and removing unserviceable debris off the premises all as specified and as directed.
M & L for rendering 15 mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.
M & L for rendering 15 mm thick in CM (1:6) on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed.
M & L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in CM (1:4) complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for such as RCC post, manholes, landings etc ( reinforcement cut as required to facilitate demolition) complete all as specified and as directed.
M & L for RCC (nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in arch beams, cantilevers, bressummers, lintels over 1.5 m Span etc complete all as specified and as directed.
M & L for RCC (nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc., complete all as specified and as directed.
M & L for use and waste of timber as in form work to sides and soffits of roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc., also splays between floors and beams etc., for fair finished surfaces of concrete flat all as specified and as directed.
M & L for RCC (nominal mix) (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in chajjas /roof projection /fins etc., complete all as specified and as directed.
M & L for use and waste of timber as in formwork to chullas, chajjas, troughts and similar item including edges etc., complete all as specified and as directed.
M & L for precast cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in CM (1:4) complete all as specified and as directed.
M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
Description all as per Item No 22 above but 5 mm dia and over upto and including10 mm dia as in stirrups, spacers and binders etc., complete all as specified and as directed.
M & L for rendering 10 mm thick in CM (1:4) on concrete surffaces chajjas, fins etc., over and including 15mm thick doubing coat plastering in CM (1:6) and finished even and smooth without using extra cement including taking down and brooming with wire brush all as specified and as directed. Note : Work shall be carried out up to 6 mtr height and the rate quoted shall deemed to include this aspect.
M & L for preparation of new decorated surfaces and applying two coat of acrylic emulsion exterior grade on wall over a coat of primer complete all as specified and as directed.
M & L for preparation of new decorated surfaces and applying two coat of distemper oil emulsion over a coat of putty finish and a coat of alkaline resistant primer complete all as specified and as directed.
M & L for applying one coat of distemper oil emulsion on old decorated surfaces of walls including preparation of surface by washing, rubbing down and stopping of distempered surfaces complete all as specified and as directed.
Description all as per Item No 27 above but on ceiling surfaces complete all as specified and as directed.
M & L for applying two coats of distemper oil emulsion on old decorated surfaces of walls including preparation of surface by washing, rubbing down and stopping of distempered surfaces complete all as specified and as directed.
M & L for preparation of old decorated surfaces of ceiling, cornices etc., including brooming down or steel wire brushing, scraping down smoke , moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.
M & L for preparation of old painted cement concrete surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparation of old surfaces and applying one coat of acrylic emulsion exterior grade on wall complete all as specified and as directed.
M & L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Description all as per item No 33 above but on steel surfaces complete all as specified and as directed.
M & L for preparing old surfaces of walls and applying one coat of cement base paint (any shade) as approved complete all as specified and as directed.
M & L for complete removal of existing treatment on wall by scrapping , washing, rubbing down and stopping of distempered and applying two coats of oil bound distemper over a coat of primer over wall care putty on walls all as specified and as directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any mortar complete all as specified and as directed.
Demolition of un-reinforced cement concrete in ground floors for levelling of and pavings n.exc 15 cm thickness including floor finish complete all as specified and as directed.
M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass oncrete all as specified and as directed.
M & L for providing 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in floor finishing cement concrete surfaces even & smooth using extra cement complete all as specified and as directed.
M & L for providing 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.
M & L for providing 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.
M & L for providing 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection and hard standing finished fair and even complete all as specified and as directed.
M & L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade'A' complete all as specified and as directed
M & L for Granite stone slab in flooring of approved colour 16-18 mm thick machine cut, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and as directed.
M & L for Granite stone slab in skirting/dado of approved colour 16-18 mm thick machine cut, rounding edges, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including rendering/ backing coat 15 mm thick in CM (1:4) complete all as specified and as directed.
M & L for Granite tile flooring 10 mm thick machine cut, rounding edges, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed bedding in CM (1 :4) complete all as specified and as directed.
M & L for Granite tile 10 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including rendering as backing coat 10 mm thick in CM (1 :3) complete all as specified and as directed.
M & L for coloured glazed ceramic coloured tiles 450/350 x 7 mm / 600 x 300 x 7 mm thick as in dados/ skirting etc., set jointed in cement slurry & pointed in white cement or coloured cement to match, laid over and including rendering as backing coat 10 mm thick in CM (1 :3) complete all as specified and as directed.
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick screed bed in CM (1 :6) complete all as specified and as directed.
M & L for machine cut kota stone slab as dado, skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over backing coat 15 mm thick in CM(1:3) complete all as specified and as directed.
S & F factory made machine pressed chequered cement concrete coloured tiles of size 300mm x 300mm x 22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, laid over 20 mm thick screed bed in CM (1 :6) complete all as specified and as directed.
Description all as per item No. 53 above but on vertical surfaces as in skirting, dados and risers of steps, laid over backing coat 15 mm thick in CM (1:3) complete all as specified and as directed.
Description all as per item No. 53 above but bull nosed as in treads complete all as specified and as directed.
M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, over and including 50mm thick crushed stone sand (M sand) cushioning complete all as specified and as directed.
Fixing only machine pressed precast concrete interlocking paver block any shape, size and thickness, over and including 50mm thick crushed stone sand (M sand) cushioning complete all as specified and directed.
M & L for Sand cusion of M-sand in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
S & F 15mm thick plain Endura parking tile of size 300 x 300mm of any colour in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S & F for pre-painted Galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and as directed.
S & F for pre-painted Galvalume aluminium Zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding /even board and gutter to wall fixed with self tapping screws all as specified and as directed.
S & F for Fibre glass reinforced translucent semi-corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and as directed.
Dismantling of structural steel work including door , gates, framed truss, rafter, purlins etc., complete all as specified and as directed.
S & F for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders framed balusters; walk ways railings ; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.
S & F for rolled mild steel works such as in framed roof trusses, trusses,purlin, rails and fastening (beam, tee, angle,channel or flats section) etc conforming to Fe-410-W(Gde E-250) quality-A complete all as specified and as directed.
S & F for steel work in tubular post, trusses including special shaped washer etc.,complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and as directed.
M & L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 all as specified and as directed.
S & F lorry hinges mild steel, size 100 mm complete all as specified and as directed.
S & F 250 mm length mild steel, sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate, and two on staple plate and fixed complete all as specified and directed.
M & L for welded steel wiremesh fabric supplied and fixed complete to wood or steel members, weight per square metre n.exc 4 Kg complete all as spcified and as directed.
M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) Note :- Rate for taking down of the gutter upto 10 mtr height deemed to be included in quoated rate by the contractor.
S & F PVC half rounded gutter dia 160mm (CL-2) 0.4 Mpa (4 Kg/Sqcm) complete all as specified and as directed.
S & F 160mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F 110mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F 75mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps all as specified and as directed.
S & F PVC (SWR) bends 160mm bore all as specified and as directed.
S & F PVC (SWR) bends 110mm bore all as specified and as directed.
S & F PVC (SWR) bends 75mm bore all as specified and as directed.
S & F in repairs PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F in repairs PVC (SWR) floor trap of 100 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.
Demolition and breaking up ( SGSW /AC or reinforced concrete drain pipes) upto 150mm bore, set in cement concrete complete all as specified and as directed.
M & L for providing PCC (1:3:6) type C-2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 160 mm bore all as specified and directed.
M & L for PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in coping /benching, cills, bands, kerbs etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specifeid and directed.
M & L for gypsum board false ceiling 12mm thick fixed with standard GI frame work with GI furring channels of 16 gauge, main "U" shaped channels @ 1220mm c/c and inter connected cross channels "C" shape spaced at 610mm c/c, the main furring channels shall be fixed through GI cannels suspenders from thero of @1200c/c, main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, with and including plaster of paris decorative type cornices all around at the junction of wall and ceiling etc shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.
Taking down chowkats or frames n.exc 1.5 Sqm each (without taking off shutters from the frames). complete all as specified and as directed.
Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
S & F second class hard wood (Sal) plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S & F for 30 mm thick second class hard wood plain , framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a)complete all as specified and directed.
S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b)complete all as specified and as directed.
S & F in repairs galvanised steel wiremesh 1.4mm dia fixed with tinned tacks of tinned tacks of wire staples size of mesh 12mm all as specified and as directed.
S & F in repairs for 12 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ timber frame all as specified and as directed.
S & F in repairs for 18/19 mm thick prelaminated particle board, interior graded, preliminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ tibmer frame all as specified and as directed.
S & F in repairs powder coated aluminium door/ windows/ partition etc. with one or more rebates using suitable size standard aluminium sections including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.
S & F in repairs for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.
S & F in repairs 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S & F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S & F in repairs 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S & F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and as directed.
S & F in repairs 100 mm size extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and as directed.
S & F in repairs 100 mm long medium weight, cold rolled mild steel Butt hinges ISI marked complete all as specified and as directed.
S & F in repairs 75mm long medium weight, cold rolled mild steel Butt hinges ISI marked complete all as specified and as directed.
M & L for preparation of new painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a pink primer coat complete all as specified and as directed.
S & F in repairs vitreous China clay WHB flat back size 550 x 400 mm incl PVC waste pipe 32 mm dia, CP waste coupling brackets etc complete all as specified and as directed.
S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S & F in repairs 15 mm bore fancy type Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S & F in repairs 15 mm bore fancy type long body bib taps cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Parryware, Cat No : T3506A1 or equivalent in Prayag/ Jaquar/ Hindware/ Cera
S & F in repairs 15 mm bore fancy type Pillar taps cast copper alloy,fancy type , with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal / Aluminium frames including punching or drilling out old glazing pins/ spring clips complete all as specified and as directed.
S & F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty / aluminium rubber beading in squares exc 0.5 Sq.m in each pane complete all as specified and as directed.
S & F 4 mm thick sheet glass ordinary quality and glazing wooden fillets / rubber beading in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.
S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.
Refixing 15 mm bore of pipes old steel pipes and connection in new or old position (walls, ceiling, floors etc,) all as specified and as directed.
Refixing 20 mm bore of pipes old steel pipes and connection in new or old position (walls, ceiling, floors etc,) all as specified and as directed.
Taking up or down 25 or 32 mm bore steel tubing and connections, etc., all as specified and as directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.
S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.
S & F 25 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.
Dismantling water tank of capacity exc 500 and nexc 1000 ltr., complete all as specified and as directed.
S & F rotational moulded polyethylene water storage tanks three layer (cylindrical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and as directed
S & Frotational moulded polyethylene water storage tanks three layer(cylindrical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and as directed
S & F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min. wt 20mm-210gm) all as specified and as directed.
S & F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
M & L for preparing old surfaces applying one coat of floor tile guard paint as approved complete all as specified and as directed.
S & F in repairs aluminium coated curtain rods brackets antique finish with doom suitable for single curtain rods of 25 mm fixed in position with approapriate screws all as specified and as directed.
S & F in repairs 25mm dia aluminium coated designer curtain rods antique finish fixed to double bracket matching with curtain rods in fixed in position all as specified and directed.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, or for man holes etc., n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.
Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm back side of wall complete all as specified and as directed.
Removing excavated soil to a distance n.exc 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting pointing complete all as specified and as directed.
E/M PORTION Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. Note:Old existing 2' x 2' light fittings and recess type ceiling and picture lights of any size/type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.
Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and as directed. Note for Item Nos 136 to 138 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex Make of Conduit: Pressfit/Bajaj plast/ Precision
(a) One Light/fan etc. point controlled by one switch 5/6 Amps.
(b) One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No 139 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed. Note for Item Nos 139 & 140 : (i) Modular metal flush boxes shall be measured & paid separately. (ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for concealed sub-main wiring alongwith earth wire of size (4 x 6.0) Sqmm + (2 x 6.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of Conduit: Pressfit/Bajaj plast/ Precision Note : (i) 04 runs of PVC wire, 02 runs of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.0) Sqmm + (1 x 6.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Make of Conduit: Pressfit/Bajaj plast/ Precision Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.0) Sqmm + (1 x 4.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Make of Conduit: Pressfit/Bajaj plast/ Precision. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.5) Sqmm + (1 x 2.5) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Make of Conduit: Pressfit/Bajaj plast/ Precision. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.
S & F Modular switch, one way, 6/10 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVSXXW061 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVSXXW161, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVKSWW065, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACTXMIIX01/02, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACTXMIIX03, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACTXMIIX06, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVPPCWV01/02, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F modular cover plate suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVPPCWV03, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F modular cover plate suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree(Havells), Cat No : ACVPPCWV06, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab Note for Item Nos 149 to 154 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor
S & F wall / surface mounted LED light fitting 20 W or next higher rating (4 FT), CRI > 80, CT>5700 K, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make: Havells, Cat No: ENDURALINEARNEO BS20WLED865SPCWH or techno-commercially equivalent in Philips/Jaquar
S & F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells, Cat No : HEXAFT10WLED857 SSYMBOPC or techno-commercially equivalent in Philips/Jaquar
S & F energy saving high power LED building security light of 30W Including bracket of size 40mm made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit complete all as specified & as directed. Make: Havells, Cat No : ENDURASUNDOWNS L30WLED765PASYBOPC or techno-commercially equivalent in Jaquar/Philips
S & F LED square shape (2' x 2') slim ceiling RECESS light fitting 40 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size all as specified and as directed. Make : Luker, Cat No : LPS40 or techno-commercially equivalent in Philips /Havells.
S & F wall / surface mounted LED light fitting 14 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LWL110-2 or techno-commercially equivalent in Philips /Jaquar /Havells.
Supply, install, testing & commissioning of Exhaust fan, Metal body with connected accessories 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 230 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air-DB, Cat No : FHVVEM7DBB12 or techno-commercially equivalent in Usha/Crompton. Note :- The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates
S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in Legrand/ABB.
S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in LEGRAND /ABB.
S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN04DD or techno-commercially equivalent in LEGRAND /ABB.
S & F MCB, DB, TPN, 8 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN008DD or techno-commercially equivalent in ABB/LEGRAND.
S & F MCB, DB, TPN, 6 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in ABB/LEGRAND.
S & F MCB, TPN, 10KA, 415V, "C" curve, 40 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40400C or techno-commercially equivalent in ABB/LEGRAND.
S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40630C or techno-commercially equivalent in ABB/LEGRAND.
S & F MCB, TPN, 15KA, 415V, "C" curve, 125 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU15S41253C or techno-commercially equivalent in ABB/LEGRAND.
S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and as directed. Make : L&T, Cat No : BB20320C or techno-commercially equivalent in LEGRAND /SIEMENS.
S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and as directed. Make : L&T, Cat No : BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS. Imp Note for Item Nos 156 to 171 : Design /Drawing /Technical catalogue / specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.
M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip of size 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. incl taking down old unsv earthing complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed.
Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geyser) of 50 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated including connected accessories and 2/4 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos incl taking down old Geyser & depositing to MES Storeyard complete all as specified and as directed. Make : Havells, Model - Monza DX, Cat No: GHWAMGSWH050 or techno-commercially equivalent in V-Guard/Bajaj Note : (i) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surface and matching to the existing/original surface is deemed to be included in the unit quoted rates.
S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A, C Series with Breaking capacity 10KA complete all as specified and directed. Make: L&T, Cat No : DBMPS220SD or techno commercially equivalent in LEGRAND/ SIEMENS
Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, laying of cables and getting out in hard/dense soil complete all as specified and as directed.
Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.
Supply and laying light grade GI Pipe (ISI Marked) of 50mm dia for cable protection to be fixed on wall with necessary clamps or in road crossing, complete all as specified and as directed. Make: TATA/Jindal/Prakash Note : Rate qouted shall include MS clamps of required size wherever GI pipes are to be fixed on wall,poles etc
M & L for cutting the existing hard standing /PCC / WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top 30 cm thick cement concrete type B-1 (1:2:4) using 20 mm grade aggregate, bottom filled with excavated earth and remain finishing to a uniform smooth surface complete all as specified and directed.
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 3.5 Core 70 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed. Make: Havells/Finolex/Polycab. Note : Rate qouted shall include MS clamps of required size wherever cable will be passing through GI pipes to be fixed on wall,poles etc.
Supply, spreading and compacting of approved river bed sand in trenches for cable cushion on both top and bottom of cable, including ramming all as specified and as directed.
VVM CONSTRUCTIONS
Shree Amritha builders
K.AYYAPPAN
S.RAMACHANDRAN
KRA Engineering and Construction
M SUNDARARAJAN
JK BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .