Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.1 Cr+₹90.0 L (75.2%)Admitted-Finance | ₹2.1 Cr+₹90.0 L (75.2%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GANGA ELECTRICALS L1 | Sarveshwari Electric Works L2 |
|---|---|---|---|---|---|
| 1.00High Mast Installation Work in Madan Mohan Malviya Stadium in Chandra Shekhar Azad Park in Prayagraj City under Smart City Mission | |||||
| 1.01 | Supply & fixing of 30 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for designed luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.
(Note:Refer scope of work) | 4 | Each | 8,99,999 ₹35,99,996 Lowest | 25,50,000 ₹1,02,00,000 |
| 1.02 | Supply and fixing of factory wired integral LED flood light luminaires for all 4 towers with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA (Note: The Vender has to design the number and wattage of luminaries to attain the required lux level and quote the rate of all luminaires to be used as single unit.) | 1 | Unit | 67,99,999 ₹67,99,999 Lowest | 87,41,463 ₹87,41,463 |
| 2.00Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only | |||||
| 2.01 | Incoming 100 Amp MCCB -1 No & Outgoning 63 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos. | 4 | Each | 15,000 ₹60,000 Lowest | 1,00,000 ₹4,00,000 |
| 2.02 | Incoming 630 Amp. MCCB-1 Nos & 100 Amp.MCCB-5 Nos.& 63 Amp.MCCB-2 Nos | 1 | Each | 50,000 ₹50,000 Lowest | 3,25,000 ₹3,25,000 |
| 3.00Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade to be passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. | |||||
| 3.01 | 240 sq. mm 3-1/2 core | 250 | Mtrs | 1,150 ₹2,87,500 | 950 ₹2,37,500 Lowest |
| 3.02 | 25 sq. mm 3-1/2 core | 900 | Mtrs | 315 ₹2,83,500 | 250 ₹2,25,000 Lowest |
| 3.03 | 16 sq. mm 4 core | 1,200 | Mtrs | 290 ₹3,48,000 | 175 ₹2,10,000 Lowest |
Tender Value
₹1.4 Cr
EMD Value
₹3.3 L
Closing Date
20 Dec 2022, 3:30 pmClosed
CEO, Prayagraj Smart City Ltd
Prayagraj
High Mast Installation Work in Madan Mohan Malviya Stadium in Chandra Shekhar Azad Park in Prayagraj City
2022_PSCL_758768_1
683_PSCL_2022_23
Open Tender
Electrical Works
Item Rate
120 days
Prayagraj
As per RFP
3 documents required · 3 mandatory
₹5,900
CEO, Prayagraj Smart City Ltd.
₹3.3 L
Yes
28 Dec 2022
14 Dec 2022
20 Dec 2022
14 Dec 2022
20 Dec 2022
14 Dec 2022
Amount
High Mast Installation Work in Madan Mohan Malviya Stadium in Chandra Shekhar Azad Park in Prayagraj City under Smart City Mission
Supply & fixing of 30 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for designed luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (Note:Refer scope of work)
Supply and fixing of factory wired integral LED flood light luminaires for all 4 towers with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA (Note: The Vender has to design the number and wattage of luminaries to attain the required lux level and quote the rate of all luminaires to be used as single unit.)
Incoming 100 Amp MCCB -1 No & Outgoning 63 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos.
Incoming 630 Amp. MCCB-1 Nos & 100 Amp.MCCB-5 Nos.& 63 Amp.MCCB-2 Nos
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade to be passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
240 sq. mm 3-1/2 core
25 sq. mm 3-1/2 core
16 sq. mm 4 core
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
63 mm dia (OD-63 mm & ID-51 mm nominal)
160 mm dia (OD-160 mm & ID-135 mm nominal)
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3½ X 240 sq. mm (62mm)
4 X 25 sq. mm (28mm)
4 X 16 sq. mm (28mm)
Note:-1.The bidder has to design the requisite illumination level of IAAF standard/National lighting code- 2010,class-I ,non-televised. 2.The vender has to design the number and wattage of luminaries to attain the required lux level and submit the drawing with number and specification and make /Brand 3.Fixtures make / Brand - Bajaj, Crompton, Havells,Philips. 4.The Payment of the Luminaries will be made only after checking of lux level, instruments for which will be arranged by the vendor.5The price bid for luminaries will be quoted as a unit item in this Financial Bid.6Location of the tower (High Mast) is tentative , Vendor can design the location of the tower with suitable illumination level by its own with out changing the number of towers.
Sarveshwari Electric Works
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
Tendernotice_2.pdf
PDF • 1.53 MB
Tendernotice_3.pdf
PDF • 0.81 MB
BOQ_1247854.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .