E-quotation No. 02 2026-27

Cost towards repairing, servicing and overhauling of 10 H.P. HSC C/F Pump set having 1450 rpm, head 40 mtrs, discharge 32 m³/hr, Pump make- Kirloskar DSM type with following works:- i. Opening, dismantling & cleaning of the pump. ii. Making, turning & finishing and fitting S.S. pump shaft-01 No. as per sample with threading, key slot making grooving etc. all complete job.-01 No. iii. S.S. shaft sleeve-02 Nos. as per sample. iv. Ball bearing -6305 (SKF/NBC make)-02 Nos. v. Check nut-02 Nos. vi. M/F Gland tightener as per sample-02 Nos. vii. Bearing housing re-metalling, turning & finishing as per sample and suitable for bearing.-02 Nos. viii. Making & fitting of Neck ring-02 Nos. ix. S.S. bush as per sample-02 Nos. x. Tyre Coupling set with lathe work-01 set Complete re-assembling and overhauling of Pump, installing at site with all labour, tools & tackles and Testing on full load with transportation charge up & down etc. including the deduction of scrap materials all complete at clear water P/Plant Kalipahari.

Supplying all labor tools and tackles for complete opening, dismantling, cleaning of its slots of stator by brush & petrol then complete rewinding of JSL make 10 H.P, 415 volts, 50c/s,1450 rpm, Star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping, varnishing, heating ,repairing of stator & rotor and reassembling to its original position &testing on full load. Changing of bearings-DE/ NDE 6308/ 6208 as per sample-2 Nos. with including the deduction of cost burnt copper Wires and transportation charges from p/plant to workshop and back to the same etc. all complete at clear water p/plant . Wt. of cooper wire approx.-8.50 kg.

Supplying all labor tools and tackles for complete opening, dismantling of JSL make 10 HP, 415 volts, 50c/s,1450 rpm, Star delta, 3 phase induction motor by varnishing, heating, repairing of stator & rotor and reassembling motor to its original position and testing on load etc. all completed at WTP with changing of followings bearings (i) Ball bearing DE/ NDE 6308/ 6208 (SKF) as per sample-1 No. each, terminal plate-01 No. as per sample including the deduction of scrap materials.

Cost towards repairing, servicing and overhauling of 30 H.P. HSC C/F Pump set having 1460 rpm, head 60 mtrs., discharge 82 m³/hr., Pump make - Kirloskar DSM type with following works:- i. Opening, dismantling & cleaning of the pump. ii. Making, turning & finishing and fitting S.S. Pump shaft-01 No. as per sample with threading, key slot making grooving etc. all complete job.-01 No. iii. S.S. shaft sleeve-02 Nos. as per sample. iv. Ball bearing -6305 (SKF/NBC make)-02 Nos. v. Check nut-02 Nos. vi. Gland tightener-02 Nos. vii. Bearing housing re-metalling, turning & finishing as per sample and suitable for bearing.-02 Nos. viii. Making & fitting of Neck ring-02 Nos. ix. S.S. bush as per sample-02 Nos. x. Tyre Coupling set with lathe work-01 set. Complete re-assembling and overhauling of Pump, installing at site with all labour, tools & tackles and Testing on full load with transportation charge up & down etc. including the deduction of scrap materials all complete at clear water P/Plant Kalipahari.

Supplying all labor tools and tackles for complete opening, dismantling, cleaning of its slots of stator by brush & petrol then complete rewinding of JSL make 30 H.P, 440 volts, 50c/s, 1460 rpm, Star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping, varnishing, heating and reassembling to its original position repairing of stator & rotor& testing on full load. Changing of bearings- DE/NDE -6310/6310 Make as per sample-2 Nos. with including the deduction the cost of burnt copper Wires and transportation charges from p/plant to workshop and back to the same etc. all complete at clear water p/plant. Wt. of copper wire approx. -22.50 kg

Supplying all labor tools and tackles for complete opening, dismantling of JSL make 30 HP, 415 volts, 50c/s, 1460 rpm, Star delta, 3 phase induction motor by varnishing, heating, repairing of stator & rotor and reassembling of motor to its original position and testing on load all completed at WTP with changing of followings bearings (i) Ball bearing DE/ NDE 6310/ 6310 (SKF) as per sample-2 Nos. each, terminal plate-01 No. as per sample including the deduction of scrap materials.

Cost towards Resetting of base plate by supplying of new MS base plate as per sample in place of damaged/rusted base plate for 10 & 30 H.P c/f Pump set, groove making, finishing and welding of damaged foundation bolts, pump and motor refitting & alignment, leveling etc., with all labor, tools and materials including the deduction of scrap materials. I. For 10 HP Pump Motor set- 2 Nos. II. For 30 HP Pump Motor set- 1Nos.

Cost towards repairing & servicing of motor control panel (MCP) having FASD starter – 4 nos. (2 for 10 HP and 2 for 30 HP p/sets) and 200 Amp. 415Volts incomer MCCB with following works- i. Changing of L&T MNX 50 main contactor with L&K/ Schneider contactor -1 no. with Front- (2NO+2NC) & Side Add on Auxiliary contacts -01 no. each as per suitable for FASD-1(30 HP). ii. Changing of Star & delta contactor MNX 40& MNX 50- 01 No. each having Front-(2NO+2NC)-1 & Side Add on Auxiliary contacts-(1NO+1NC)- 01no. each with with L&K/Schneider contactor with Front- (2NO+2NC) & Side Add on Auxiliary contacts -01no. each as per suitable –for FASD-2(30 HP). iii. Changing of star & Delta contactor MNX-25-01 No. each having Front-(2NO+2NC)& Side Add on Auxiliary contact-(1NO+1NC)-01 no. each with L&K/Schneider contactor with Front- (2NO+2NC) & Side Add on Auxiliary contact -01 no. each as per suitable. –for FASD-1.(10 h.p.) iv. Changing of Thermal overload Relay (30-50 A)-125A max. with required ratings -01 No. v. Changing Timer (12-120 sec)-01 No. (L&k Make) vi. ON-OFF push buttons-02 Nos. vii. 3 Phase LED Voltmeter CI 0.5-01 No. viii. 3 Phase LED Ampere meter CI 0.5 -01 No., ix. Single phasing, reverse current, under voltage, over voltage protection relay (MPD)-02 sets for both motor. x. LED Phase indicating bulb-06 Nos., xi. Auto/Manual Selector switch-03 Nos. xii. Spare MCCB-100 amp. L&k/Havell’s/BCH /ISI Mark any reputed make. xiii. S/F of 4 sq. mm Single core copper cable for control wiring etc. with all fitting & electrician and servicing charges at P/Plant.

Cost towards Servicing and repairing of 75 KVA Servo voltage stabilizer having input-240-470 volt, Output-400±1% V Power Line make with following works- i. Cost towards S/F of servo motor as per sample having torque 03 kg-cm to 10kg-cm, 240V,1PH, 50Hz 125mA, 60 RPM with required rating suitable for servo stabilizer - 01No. ii. Panel Sensing-Control Card-01 No. iii. Relay, iv. Digital Voltmeter as sample-01 No. each. , v. Control transformer-02 Nos. vi. Top up T-Oil -60 Ltr. Including all labor tools tackles and electrician charges etc. all complete job and testing on full load at wtp.